Positive Camber – Traditional camber engages the tip and tail of the ski, enhancing ease of entry and exit into and out of a turn, while maintaining solid edge control.

Flex Pattern - Tip: 5, Waist: 7, Tail: 6 (1=soft; 10=stiff)

Double Zone Core – Two high density wood stringers rest alongside ultralight wood in the ski's core and add to stability and strength without compromising weight.

Laminate Matrix – Deliberate directional layering of fiberglass dictates flex pattern and torsional rigidity and allows each ski's flex to be precisely tuned. Bi-axial fiberglass runs in an “x” pattern down the ski to control lateral flex; Uni-directional fiberglass controls flex along the length of the ski; Tri-axial fiberglass, with fibers running in three directions, beefs up the center of the ski.

CK Stringer – Carbon Kevlar combo stringers lie on top of the laminate matrix along the tail to brace the ski. This increases the landing platform, especially when weight is distributed farther back in the ski than intended. It also gives the ski more pop and extends ski life.

ABS Sidewall Construction – A full sidewall construction of two strips of ABS material lie directly alongside the core and over the ski’s edges, providing solid edge hold, core protection, and stability.

50/50 Base – A blend of speed and durability, this base is faster than Armada’s S7 base but more rugged than the Comp series.

2.5 Impact Edge – This edge has an oversized height and width, and the steel is heat-treated to a proprietary hardness, which helps resist breaking and tearing out from rails, ledges and any other abuse it might meet.

Bindings not included

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.