Positive Camber – Traditional camber engages the tip and tail of the ski, enhancing ease of entry and exit into and out of a turn, while maintaining solid edge control.

Stiffer Flex – provides less flex and gives you a greater all mountain range.

Flex Pattern - Tip: 6, Waist: 8, Tail: 7 (1=soft; 10=stiff)

Hybrid Triple Zone Core – Three high density wood stringers sit along ultra light wood for a powerful, durable core with explosive energy return. Triple Zone cores resist compression without creating unnecessary weight.

Laminate Matrix – Deliberate directional layering of fiberglass dictates flex pattern and torsional rigidity and allows each ski's flex to be precisely tuned. Bi-axial fiberglass runs in an “x” pattern down the ski to control lateral flex; Uni-directional fiberglass controls flex along the length of the ski; Tri-axial fiberglass, with fibers running in three directions, beefs up the center of the ski.

CK Stringer – Carbon Kevlar combo stringers lie on top of the laminate matrix along the tail to brace the ski. This increases the landing platform, especially when weight is distributed farther back in the ski than intended. It also gives the ski more pop and extends ski life.

AR50 Sidewall Construction – ABS sidewall meets cap construction – the best of both worlds. This engineering method combines the lightweight cap construction in the tip and tail with ABS sidewall underfoot, resulting in enhanced edgehold and significantly lower swing and overall weight.

S7 Base – Armada's toughest base is durable and low maintenance, with a speed additive for quickness.

2.5 Impact Edge – This edge has an oversized height and width, and the steel is heat-treated to a proprietary hardness, which helps resist breaking and tearing out from rails, ledges and any other abuse it might meet.

In honor of Armada's 10th Anniversary the original graphic has returned!

Bindings not included

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.