Pivoting / Tracking Toe Piece – Allows the boot to move laterally ~6˚ to either side without forcing open the toe jaws

Toe Lever – Lever is pushed forward and flat to the ski to lock the toe for skinning - this also locks the rotational capability.

Heel Pins – New ovalized heel pins are spring loaded and have up-and-out elastic travel for better retention than any tech binding to date.

Release – Lateral and Vertical release both originate at the heel, and release values are set with separate screws.

Mid and High Climbing Levels

Toe Locking Feature – The Beast 16 toe locks by pushing the wide black lever forward and flush with the ski deck (the opposite of traditional Dynafit levers); this locks out the lateral rotation as well as preventing the toe jaws from opening.

Requires use of Dynafit "horseshoe" heel fitting that replaces the traditional tech heel plate on your boot.

Compatible with Tech Boots Only – Tech toe and heel fittings must be installed in your boots in order to use this binding. If in doubt, ask your ski tech.

Stand Height and Ramp Angle – Toe: 17 mm, Heel: 23 mm, Ramp: 6 mm positive

One Size Fits All – Binding can be mounted to fit all boot sizes.

Wide 43 mm Base Plate

TŰV certified to ISO/DIN 13992 standards – This binding conforms to the ISO/DIN 13992 alpine touring binding standard.

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.