Directional Freeride Camber – Subtle rocker in the nose and tail provide additional float without losing stability. Camber underfoot provides confident edge hold and pop.

Flex Rating – 6 (1 Soft - 10 Stiff)

Directional Freeride with Slight Taper

91% Poplar / 9% Bamboo – Sustainably harvested, this blend keeps the board smooth and powerful.

Tip to Tail Carbon – Carbon fiber run through the entire core from tip to tail to provide added pop and response.

Tri-Axe Glass – Multi-axis, stitched fiberglass laminate that offers a precise and responsive ride in any ­terrain or snow conditions.

Polyurethane – Polyurethane is poured during construction to form a single, unified piece of sidewall wrapping around the entire core for increased strength and durability. Because of this process, it also creates less waste material than other sidewall options.

Sintered Durasurf 4001 – The gold standard in bases. The 4000-series sintered bases have a higher density than other options on the market, and are therefore more durable. Additionally, it absorbs more wax, making for a faster and smoother ride. 4000-series PTEX is usually reserved for only top-of-the-line boards due to a higher manufacturing cost, but at Weston it’s the minimum standard.

Boltless Base

Rugged Topsheet – Polymide is eco friendly and made from castor beans. The topsheet is durable and resistant to scratches and scuffs.

Karakoram UltraClips and Active Joining – Karakoram UltraClips and Tip-Locks use Active Joining to spring load the seam of your splitboard, eliminating the rattling shearing, and rolling inherent to passive slip-fit connections. Simply close the lever to lock in the most responsive ride.

Rooted Inserts – The odds of pulling out inserts on a snowboard are about zero, but just to make sure Weston have reinforced all of the inserts areas with precision-cut sheets of flax. This improved durability and naturally dampens chatter. Additionally, flax is a sustainable crop and is good for the environment.

Split Tech – Weston doesn't skimp on their splits. You'll see a full inner metal edge, complete with sidewall and dampening tape. Also, when facing a kick-turn on a steep slope, you want all the help you can get - that's why Weston balance's their splits so that they are tail heavy.

Standard Splitboard Insert Pattern

Dual Ride Stride – Saving energy in the backcountry can be the difference between going for a second lap, going for a longer tour, or going home because you’re wiped out. All Karakoram splitboard bindings come standard with Dual Ride-Stride forward lean. With a -8° forward lean setting, Stride Mode allows you to stride and glide further with every step. Dual Ride modes allow you to effortlessly switch between railing carves and surfing turns. Drive Mode consists of a preset useradjustable forward lean (0°-22°), and surf mode can be activated without unstrapping (11° or 0°). Simply turn and go. Dual RideStride is the fastest and easiest forward lean adjustment available.

Smooth Touring Pivot – Independent sleeves rotate freely on a fixed thru-axle, similar to a bike axle, making these stiff and smooth. They're wide for touring rigidity, they shed snow well, and the quick-releasing bracket allows for simple transitions.

Dual Speed Riser with Heel Lock Pole Basket Flip – Flip up/down with pole basket on the fly. Retractable Heel-Lock included.

Heel Lock – On-the-fly heel lock down Release load equivalent to DIN 6 Heel-Lock folds out of way when not needed

Dual Ride 2.0 – Active Joining pulls your splitboard together and keeps your feet spring-loaded to the board, giving you direct power transfer to the edge and instant response in a way that passive, slide fit splitboard systems cannot.

Active Joining – No slop with instant response. Pre-loaded contact points create an ultra solid connection between your bindings and splitboard.

Interlocking Seam Tabs – No separation: tabs interlock across the seam of your board, interlocking and pre-loading the two halves for a solid ride.

Snow Ejection Channels – Made from a carbon infused nylon, the Ride Mode 2.0 is designed to reduce snow build up and clear snow easily.

7075-T6 Open Chassis – CNC’d completely from 7000 series space grade aluminum, the open chassis allows your bindings to twist naturally with your board. Say no to dead spots under your feet.

Nomad X Type Heelcup – 2X stronger than standard aluminum. CNC core outs maximize the strength-to-weight ratio. The high sidewall supports boot for better power transfer and grip while side hilling.

Drop-On Change Overs – Active joining allows for a loose fit then closing the lever LOCKS your binding to board, removing all play from the system.

Flex (1 Soft - 10 Stiff) – 6

Air-Pod Straps – Made from P-Lite TPE, which is 30% lighter than standard TPU. These lightweight straps feature Independent Pressure Pods that articulate to eliminate pressure points.

Carbon Buckles – Made from recycled carbon fiber tow, these buckles are not just strong and light they use carbon fiber that is destine for landfills.

C4 Carbon Highback – Reducing weight while adding a little stiffness to a trusty Reactive Highback contour. Made from Karakoram’s proprietary Carbon Nyolite.

Flex (1 Soft - 10 Stiff) – 8

Compatible with Standard Splitboard Inserts

Compatible with Karakoram PRIME Quiver-Connectors

Includes – Bindings, Prime Splitboard Interface 2.0 with Tour Brackets and DualSpeed Risers w/ Heel Lock

Direct Power Transfer – Wide binding contact = power transfer directly to edges & tip to tail.

Wide Contact Points – Wide binding contact equals power transfer directly to edges and tip to tail.

Quiver Ready

Mohair / Nylon Blend – Kohla Austrian construction makes the lightest most durable plush, with the perfect balance of grip and glide.

Wire Rope Tip Clip – Easy install and removal from tip of board.

Universal Tail Clip – Fits to multiple splitboard tail configurations.

Easy Peel – Kohla Smart Glue Technology allows for optimal adhesion while being easy to separate.

Waterproof – Sealed with Kohla’s Patented PFC-free Vulcanized Rubber. Prevents water absorption. Keeps skins sticking to ski base in Spring conditions.