Hollow Pivot Pins – Made with stainless steel and hollowed out to be 33% lighter than standard pins

Improved ST (Smooth Touring) Mode – Spark injection molds a proprietary thermoplastic over existing aluminum or steel parts in a process called "overmolding," reducing friction and improving durabillity.

ST Whammy Bars – Overmolded plastic blend where the climbing wire meets the baseplate to eliminate stickiness. (Note: not backward compatible with previous Arc, Surge or other older models)

ST Touring Brackets – Overmolded with low-friction proprietary plastic over and through the bracket holes in the aluminum base - strong, smoother pivoting, and lasts 4 times longer than the old brass bushing.

CNC Machined Baseplates – CNC machined baseplates remain solid for max stiffness and durability. All of the baseplate side windows have been partially filled to increase durability and strength

7075 Aluminum Heel Loops – 7075 Aluminum heel loops are thinner and lighter than our standard heel loops while maintaining the required strength.

Pebax® Pillow Line Straps, Ladders and Adjusters – Pebax® is a plastic commonly used in high-end alpine touring ski boots, It is stiff, tough and 20% lighter than the standard material used.

Proven Burton Buckles

Carbon Reinforced Asym Rip 'N' Flip Highbacks – Asymmetrical design features individual left and right highbacks that slope inward matching the rider’s stance / The upper section is flatter for improved lateral mobility / More material at the base for increased longevity and durability / Higher bottom edge won’t snag on boots with crampon welts or soles that wrap high on the heel

Flippin’ FLAD toggles between your forward lean angle and -13° touring position for easy transitions.

Lateral slots for our BD Touring Strap for greater edge control while skinning.

Tool free micro-adjustable from 0° to 22° for complete customization of your forward lean angle

Made with proprietary custom blended materials for improved strength and durability, while minimizing weight.

Requires Pucks for Mounting in Ride Mode – Spark Canted Pucks recommended (available separately)

7075 Aluminum Hardware – A 65% weight savings is found by replacing 7 stainless steel components with 7075 aluminum hardware, custom made in-house

Aluminum Discs with Nylon Bases

Discs – Aluminum

Nylon Bases

3˚ Canting (Inward Angle) – A favorite among hardbooters. Your knees will thank you.

Aluminum Discs – Oversize aluminum center disc overlaps binding channels for maximum strength and rigidity.

Adjustability – +/- quarter inch (6.5mm) of toe/heel adjustment allows for perfect centering. An industry first! +/- 30 degree angle adjustments; infinite stance width and setback adjustments.

Superior Materials – Bindings slide on soft nylon for effortless installation.

Weight – 319 grams

Compatible with All Spark R&D and Other Brands' Puck Compatible Splitboard Bindings (Except K2 Kwicker)

Not Compatible with Regular Spark Puck Screws

Not Compatible with DIY Splitboards, Unless the Voile Factory Hole Pattern Was Used

Not Compatible with Channel Style Boards from Voile, Burton, and K2