Hybrid C2x Directional – Provides full contact and control in all conditions. Central rocker builds in carve, edge hold, and float and camber provides pop and stability.

Medium - Stiff Flex

Volume Shifted – Size down 3cm from your normal board.

T. Rice Orca Split Construction (SC) – 85% Lightweight Paulownia / 15% Aspen

Unidirectional Carbon / 30º Carbon Mega / Magnesium Techno Fiber Bands

Birch Internal Sidewalls

UHMW Sintered Sidewalls

UHMW Tip /Tail Impact Deflection

Sintered Knife Cut Base – High density UHMW. Optimized wax retention and toughness. Wax regularly and repair professionally.

Magne-Traction® – Strategically located edge serrations provide unreal edge hold and control in all conditions. Turns ice into powder.

Eco Sublimated Poly Top – High strength, impact resistant, lightweight dimensionally stable UV and temperature resistant top material decorated using an environmentally friendly eco sublimation process

Art by Mike Parillo

Karakoram Ultra Clips

Mervin Made – Hand made at the Mervin Factory in Washington, USA with zero hazardous waste.

Dual Ride Stride – Saving energy in the backcountry can be the difference between going for a second lap, going for a longer tour, or going home because you’re wiped out. All Karakoram splitboard bindings come standard with Dual Ride-Stride forward lean. With a -8° forward lean setting, Stride Mode allows you to stride and glide further with every step. Dual Ride modes allow you to effortlessly switch between railing carves and surfing turns. Drive Mode consists of a preset useradjustable forward lean (0°-22°), and surf mode can be activated without unstrapping (11° or 0°). Simply turn and go. Dual RideStride is the fastest and easiest forward lean adjustment available.

Smooth Touring Pivot – Independent sleeves rotate freely on a fixed thru-axle, similar to a bike axle, making these stiff and smooth. They're wide for touring rigidity, they shed snow well, and the quick-releasing bracket allows for simple transitions.

Dual Speed Riser with Heel Lock Pole Basket Flip – Flip up/down with pole basket on the fly. Retractable Heel-Lock included.

Heel Lock – On-the-fly heel lock down Release load equivalent to DIN 6 Heel-Lock folds out of way when not needed

Dual Ride 2.0 – Active Joining pulls your splitboard together and keeps your feet spring-loaded to the board, giving you direct power transfer to the edge and instant response in a way that passive, slide fit splitboard systems cannot.

Active Joining – No slop with instant response. Pre-loaded contact points create an ultra solid connection between your bindings and splitboard.

Interlocking Seam Tabs – No separation: tabs interlock across the seam of your board, interlocking and pre-loading the two halves for a solid ride.

Snow Ejection Channels – Made from a carbon infused nylon, the Ride Mode 2.0 is designed to reduce snow build up and clear snow easily.

7075-T6 Open Chassis – CNC’d completely from 7000 series space grade aluminum, the open chassis allows your bindings to twist naturally with your board. Say no to dead spots under your feet.

Nomad X Type Heelcup – 2X stronger than standard aluminum. CNC core outs maximize the strength-to-weight ratio. The high sidewall supports boot for better power transfer and grip while side hilling.

Drop-On Change Overs – Active joining allows for a loose fit then closing the lever LOCKS your binding to board, removing all play from the system.

Flex (1 Soft - 10 Stiff) – 6

Air-Pod Straps – Made from P-Lite TPE, which is 30% lighter than standard TPU. These lightweight straps feature Independent Pressure Pods that articulate to eliminate pressure points.

Carbon Buckles – Made from recycled carbon fiber tow, these buckles are not just strong and light they use carbon fiber that is destine for landfills.

C4 Carbon Highback – Reducing weight while adding a little stiffness to a trusty Reactive Highback contour. Made from Karakoram’s proprietary Carbon Nyolite.

Flex (1 Soft - 10 Stiff) – 8

Compatible with Standard Splitboard Inserts

Compatible with Karakoram PRIME Quiver-Connectors

Includes – Bindings, Prime Splitboard Interface 2.0 with Tour Brackets and DualSpeed Risers w/ Heel Lock

Direct Power Transfer – Wide binding contact = power transfer directly to edges & tip to tail.

Wide Contact Points – Wide binding contact equals power transfer directly to edges and tip to tail.

Quiver Ready

Mohair / Nylon Blend – Kohla Austrian construction makes the lightest most durable plush, with the perfect balance of grip and glide.

Wire Rope Tip Clip – Easy install and removal from tip of board.

Universal Tail Clip – Fits to multiple splitboard tail configurations.

Easy Peel – Kohla Smart Glue Technology allows for optimal adhesion while being easy to separate.

Waterproof – Sealed with Kohla’s Patented PFC-free Vulcanized Rubber. Prevents water absorption. Keeps skins sticking to ski base in Spring conditions.