Directional Rocker – A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.

Flex Rating – 7 (1 Soft - 10 Stiff)

Directional Flex Pattern

3D Contour Base 3.0 – Freeride focused 3D Contour Base featuring a 7mm of spoon bevel in the nose and 0 - 7mm of spoon bevel in the tail. Spoon bevel starts at the rocker point.

Progressive Sidecut – At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

Blunt Nose – "How a board glides in powder, crust, corn or any snow more than an inch deep is dictated by it's front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the 'snow plow' rounded tip and it's extra swing weight." - Jeremy Jones

10mm Taper – The tapered shape sinks the tail in pow for better float and quicker turns.

Fusion Core – The Fusion Core is Jones' lightest wood core yet. Core is made from mostly paulownia with specifically positioned pockets of poplar for improved durability and response.

Koroyd® Core – Award-winning synthetic core material developed for the aerospace industry. Koroyd absorbs vibrations and adds response at a fraction of the weight of wood which enhances board control and riding confidence.

Fusion Carbon – This cutting edge board lay-up process is the latest evolution of our previous Fusion Tech construction and reduces board weight and improves durability by combining board materials in two stages.

Ultra Construction – Ultra Construction is the redefinition of what it takes to build a snowboard. Jones tested every inch of the board to precisely position materials exactly where they are needed while eliminating all excess materials. Combining these innovative construction techniques with superlight wood cores and carbon fiber deliver revolutionary results. Jones Ultra boards are the lightest, yet most durable snowboards on earth.

Inside and Outside Traction Tech – Like a serrated knife slicing into the snow, Traction Tech improves your edge grip by adding multiple contact points along the running length of your board.

Bolt-Less Bridge – The Bolt-Less Bridge eliminates split clip attachment hardware from the base of the board by re-profiling the wood core at the clips. The wood core under the clips is thicker providing better torsional stiffness and a more powerful connection at the split clips.

Standard Splitboard Insert Pattern

Dual Ride Stride – Adjusts to -8˚ for touring

Dualspeed Riser – Adjusts with a pole basket to 3 heights

Smooth Touring Pivot – Independent sleeves rotate freely on a fixed thru-axle, similar to a bike axle, making these stiff and smooth. They're wide for touring rigidity, they shed snow well, and the quick-releasing bracket allows for simple transitions.

Ride Mode 3.0 – Drop-on changeovers, Active Joining for instant response and direct power transfer and Seam-Lock between the two baseplate elements to eliminate underfoot movement

Active Joining – No slop with instant response. Pre-loaded contact points create an ultra solid connection between your bindings and splitboard.

Drive Mode – User adjustable forward lean of between 0˚ and 22˚

Surf Mode – Activated without unstrapping; 11˚ or 0˚

Interlocking Seam Tabs – No separation: tabs interlock across the seam of your board, interlocking and pre-loading the two halves for a solid ride.

7075-T6 Aluminum Open Chassis

Wide Contact Points – Direct Power Transfer

Straightline X-Type Heelcup – 2 x stronger than standard aluminum

Airpod Straps – No pressure points

Carbon Buckles

C4 Pre-Preg Carbon Fiber Highback

Compatible with Standard Splitboard Inserts

Splilt Connectors Included – Quiver-Connectors for solid boards available separately

Highback Stiffness – 10 (1 = Soft, 10 = Stiff)

Chassic Feel – 9 (1 = Soft, 10 = Stiff)

Made in North Bend, WA, USA

70% Mohair / 30% Nylon – Jones Nomad and Nomad Pro climbing skins are both made with a blend of 70% natural mohair fiber and 30% synthetic nylon. The mohair offers unmatched glide and a supple skin feel while the nylon improves grip and water repellency.

PFC-Free Material

Universal Tip Clip

Universal Tail Clip

Glide Tech – Glide Tech coating reduces friction on each skin fiber so neither super-cold fresh snow or wet, hot snow will stick to the skin and rob energy-saving glide.

Ever Dry – Jones skins are treated with Ever Dry anti-glopping treatment. The coating keeps the skins from absorbing moisture and prevents snow/ice build-up under the skin.

Grip Tech – Grip Tech skins are made with a special material that works well under dynamic tension and has a high resistance to twisting and abrasion.

Rubber Safer Skins – Jones Nomad Pro skins are laminated with a rubber backing that prevents skins from getting water logged. Drier skins are safer as they are less likely to lose adhesion to your skis in critical situations.

Includes – One pair of skins, one pair of Universal tail clips, four rivets, two backing sheets, skin cutter, skin bag, and cheat sheet.

Compatible with All Splitboard Brands