Directional Rocker – A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.

Directional Flex Pattern

Flex Rating – 8 (1 Soft - 10 Stiff)

Forever Flex – All Jones boards are broken in using specialized machinery that mimics extreme riding use to help stabilize the flex and rocker profile of a board for it's lifetime.

3D Contour Base 3.0 – Freeride focused 3D Contour Base featuring a 7mm of spoon bevel in the nose and 0 - 7mm of spoon bevel in the tail. Spoon bevel starts at the rocker point.

Progressive Sidecut – At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

Blunt Nose – "How a board glides in powder, crust, corn or any snow more than an inch deep is dictated by it's front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the 'snow plow' rounded tip and it's extra swing weight." - Jeremy Jones

FSC™ Ultra Split Core – Dual density premium wood core, made from mostly paulownia with specially positioned poplar stringers for better durability and turn power.

Triax Fiberglass – Multi-axis, stitched fiberglass laminate that offers a precise and responsive ride in any terrain or snow conditions.

Sustainable Flax / Basalt Stringers – Jones exclusive sustainable stringers made with 100% natural fibers. Composite Flax and Basalt stringers help transfer power to the edges, improve torsional response, and absorb board chatter.

Stainless Steel Reinforcement – Stainless steel plates are embedded into the nose and tail for improved board tip durability.

Recycled ABS – ABS plastic is one of the necessary evils of snowboard production. Jones improves the sustainability of their snowboards by using only recycled plastic.

Sintered 8000 Base – New super durable material made from Ultra High Molecular Weight polyethylene and carbon.

Flip Flop Base – Flip-Flop bases improve board sustainability by reducing p-tex waste.

Traction Tech 3.0 – Traction Tech 3.0 features three bumps per edge (front binding, board center, back binding). The middle bump is slightly bigger than the outside bumps for better grip.

Inner Edge Traction Tech – Inner edge Traction Tech improves splitboard edge grip on ascent. Three side cut "bumps" on each side of your binding keep you locked in on icy skin tracks no matter which way you are traversing.

Inner Thin Recycled Edges – Advancements in ski edge durability allow Jones to use thinner edges to save weight.

Outer Oversized Recycled Edges – All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.

Textured Eco-Plastic Topsheet – Bio-plastic topsheet made from Castor beans featuring a subtle texture for added durability. This eco-material is ultralight, chip/scratch resistant and water/snow repellent (snow sticks less to topsheet).

Karakoram Ultra Clips with Tips Lock – Ultra clips are the strongest, lowest profile splitboard clips in the world. They deliver unmatched compression between board halves and they are adjustable so you can maintain even compression as your splitboard ages.

Bolt-Less Bridge – The Bolt-Less Bridge eliminates split clip attachment hardware from the base of the board by re-profiling the wood core at the clips. The wood core under the clips is thicker providing better torsional stiffness and a more powerful connection at the split clips.

Quick Tension Tail – A built in climbing skin tension system with a pre-cut notch that eliminates the need for a traditional skin tail clip.

Bio Resin – All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy. The raw materials used to make Super Sap Bio-Resin are co-products or waste products of other plant-based industrial processes. Producing Super Sap requires 33% less greenhouse gas emissions than conventional epoxy.

Factory Tuned – All Jones snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Wend Natural Wax – Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

Improved ST (Smooth Touring) Mode – Spark injection molds a proprietary thermoplastic over existing aluminum or steel parts in a process called "overmolding," reducing friction and improving durabillity.

ST Whammy Bars – Overmolded plastic blend where the climbing wire meets the baseplate to eliminate stickiness. (Note: not backward compatible with previous Arc, Surge or other older models)

ST Touring Brackets – Overmolded with low-friction proprietary plastic over and through the bracket holes in the aluminum base - strong, smoother pivoting, and lasts 4 times longer than the old brass bushing.

CNC Machined Baseplates – CNC machined baseplates remain solid for max stiffness and durability. All of the baseplate side windows have been partially filled to increase durability and strength

Pillow Line Straps – Pillow Line Straps are lightweight, durable, comfortable, waterproof, one-piece molded construction, and made 100% in-house. Surge ST ankle straps are wide and asymmetrical around the boot for incredible all-around support. Toe straps are designed to be used as a toe cap, but also fit nicely as a traditional strap across the top of the boot.

Ladders and adjusters are produced in-house with unique thermoplastics that maintain flex over a wide temperature range.

Proven Burton Buckles

Asym Rip 'N' Flip Highbacks – Asymmetrical design features individual left and right highbacks that slope inward matching the rider’s stance / The upper section is flatter for improved lateral mobility / More material at the base for increased longevity and durability / Higher bottom edge won’t snag on boots with crampon welts or soles that wrap high on the heel

Tool free micro-adjustable from 0° to 22° for complete customization of your forward lean angle

Flippin’ FLAD toggles between your forward lean angle and -13° touring position for easy transitions.

Made with proprietary custom blended materials for improved strength and durability, while minimizing weight.

Lateral slots for our BD Touring Strap for greater edge control while skinning.

Aluminum Discs with Nylon Bases

Discs – Aluminum

Nylon Bases

3˚ Canting (Inward Angle) – A favorite among hardbooters. Your knees will thank you.

Aluminum Discs – Oversize aluminum center disc overlaps binding channels for maximum strength and rigidity.

Adjustability – +/- quarter inch (6.5mm) of toe/heel adjustment allows for perfect centering. An industry first! +/- 30 degree angle adjustments; infinite stance width and setback adjustments.

Superior Materials – Bindings slide on soft nylon for effortless installation.

Weight – 319 grams

Compatible with All Spark R&D and Other Brands' Puck Compatible Splitboard Bindings (Except K2 Kwicker)

Not Compatible with Regular Spark Puck Screws

Not Compatible with DIY Splitboards, Unless the Voile Factory Hole Pattern Was Used

Not Compatible with Channel Style Boards from Voile, Burton, and K2