Directional Rocker – A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.

Directional Flex Pattern

Flex Rating – 8 (1 Soft - 10 Stiff)

Forever Flex – All Jones boards are broken in using specialized machinery that mimics extreme riding use to help stabilize the flex and rocker profile of a board for it's lifetime.

3D Contour Base 3.0 – Freeride focused 3D Contour Base featuring a 7mm of spoon bevel in the nose and 0 - 7mm of spoon bevel in the tail. Spoon bevel starts at the rocker point.

Progressive Sidecut – At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

Blunt Nose – "How a board glides in powder, crust, corn or any snow more than an inch deep is dictated by it's front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the 'snow plow' rounded tip and it's extra swing weight." - Jeremy Jones

FSC™ Ultra Split Core – Dual density premium wood core, made from mostly paulownia with specially positioned poplar stringers for better durability and turn power.

Triax Fiberglass – Multi-axis, stitched fiberglass laminate that offers a precise and responsive ride in any terrain or snow conditions.

Sustainable Flax / Basalt Stringers – Jones exclusive sustainable stringers made with 100% natural fibers. Composite Flax and Basalt stringers help transfer power to the edges, improve torsional response, and absorb board chatter.

Stainless Steel Reinforcement – Stainless steel plates are embedded into the nose and tail for improved board tip durability.

Recycled ABS – ABS plastic is one of the necessary evils of snowboard production. Jones improves the sustainability of their snowboards by using only recycled plastic.

Sintered 8000 Base – New super durable material made from Ultra High Molecular Weight polyethylene and carbon.

Flip Flop Base – Flip-Flop bases improve board sustainability by reducing p-tex waste.

Traction Tech 3.0 – Traction Tech 3.0 features three bumps per edge (front binding, board center, back binding). The middle bump is slightly bigger than the outside bumps for better grip.

Inner Edge Traction Tech – Inner edge Traction Tech improves splitboard edge grip on ascent. Three side cut "bumps" on each side of your binding keep you locked in on icy skin tracks no matter which way you are traversing.

Inner Thin Recycled Edges – Advancements in ski edge durability allow Jones to use thinner edges to save weight.

Outer Oversized Recycled Edges – All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.

Textured Eco-Plastic Topsheet – Bio-plastic topsheet made from Castor beans featuring a subtle texture for added durability. This eco-material is ultralight, chip/scratch resistant and water/snow repellent (snow sticks less to topsheet).

Karakoram Ultra Clips with Tips Lock – Ultra clips are the strongest, lowest profile splitboard clips in the world. They deliver unmatched compression between board halves and they are adjustable so you can maintain even compression as your splitboard ages.

Bolt-Less Bridge – The Bolt-Less Bridge eliminates split clip attachment hardware from the base of the board by re-profiling the wood core at the clips. The wood core under the clips is thicker providing better torsional stiffness and a more powerful connection at the split clips.

Quick Tension Tail – A built in climbing skin tension system with a pre-cut notch that eliminates the need for a traditional skin tail clip.

Bio Resin – All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy. The raw materials used to make Super Sap Bio-Resin are co-products or waste products of other plant-based industrial processes. Producing Super Sap requires 33% less greenhouse gas emissions than conventional epoxy.

Factory Tuned – All Jones snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Wend Natural Wax – Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

70% Mohair / 30% Nylon – Jones Nomad and Nomad Pro climbing skins are both made with a blend of 70% natural mohair fiber and 30% synthetic nylon. The mohair offers unmatched glide and a supple skin feel while the nylon improves grip and water repellency.

PFC-Free Material

Quick Tension Tail Clip – The Quick Tension Tail Clip is a lightweight tail clip system designed to fit all 2016 and newer Jones splitboards (except Youth). Jones splitboards have a notch cut into the tail of both skis that allows the Quick Tension Tail Clip to simply slide into the notch and secure the skin. The Quick Tension Clip features a durable rubber tail strap and compact metal clip.

Universal Tip Clip

Ever Dry – Jones skins are treated with Ever Dry anti-glopping treatment. The coating keeps the skins from absorbing moisture and prevents snow/ice build-up under the skin.

Grip Tech – Grip Tech skins are made with a special material that works well under dynamic tension and has a high resistance to twisting and abrasion.

Rubber Safer Skins – Jones Nomad Pro skins are laminated with a rubber backing that prevents skins from getting water logged. Drier skins are safer as they are less likely to lose adhesion to your skis in critical situations.

Includes – One pair of skins with Quick Tension tail clips attached, two backing sheets, skin bag, and cheat sheet.

9 Pre-Cut Sizes – Fits all 2016 and newer Jones splitboards (except Youth)