Directional Rocker – A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.

Personality / Flex: 2 – (1 = Soft and Playful, 5 = Stiff and Aggressive)

Forever Flex – All Jones boards are broken in using specialized machinery that mimics extreme riding use to help stabilize the flex and rocker profile of a board for it's lifetime.

Directional Flex Pattern

Directional Shape

Blunt Nose – "How a board glides in powder, crust, corn or any snow more than an inch deep is dictated by it's front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the 'snow plow' rounded tip and it's extra swing weight." - Jeremy Jones

Progressive Sidecut – At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

FSC™ Control Split Core – Dual-density full premium wood core designed specifically for splitboards. 2:1 paulownia to poplar stringer ratio keeps core light yet ultra damp.

V-Core – Boards with V-Cores are slightly softer in the very center of the board for improved manouverability and stiffer through the tip and tail for stability and pop.

Biax Fiberglass – A dual-direction, dual-layer, stitched fiberglass laminate that provides a fun, forgiving and snappy ride.

Stainless Steel Reinforcement – Stainless steel plates are embedded into the nose and tail for improved board tip durability.

Sintered 8000 Base – New super durable material made from Ultra High Molecular Weight polyethylene and carbon.

Flip Flop Base – Flip-Flop bases improve board sustainability by reducing p-tex waste.

Inside and Outside Traction Tech – Like a serrated knife slicing into the snow, Traction Tech improves your edge grip by adding multiple contact points along the running length of your board.

Oversized Recycled Edges – All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.

Eco-Plastic Topsheet – Bio-plastic topsheet made from Castor beans. This eco-material is ultralight, chip/scratch resistant and water/snow repellent (snow sticks less to topsheet).

Karakoram Ultra Clips – Ultra clips are the strongest, lowest profile splitboard clips in the world. They deliver unmatched compression between board halves and they are adjustable so you can maintain even compression as your splitboard ages.

Bolt-Less Bridge – The Bolt-Less Bridge eliminates split clip attachment hardware from the base of the board by re-profiling the wood core at the clips. The wood core under the clips is thicker providing better torsional stiffness and a more powerful connection at the split clips.

Karakoram Tip-Lock Clips

Bio Resin – All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy. The raw materials used to make Super Sap Bio-Resin are co-products or waste products of other plant-based industrial processes. Producing Super Sap requires 33% less greenhouse gas emissions than conventional epoxy.

Factory Tuned – All Jones snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Wend Natural Wax – Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

Standard Splitboard Insert Pattern

Dual Ride Stride – Saving energy in the backcountry can be the difference between going for a second lap, going for a longer tour, or going home because you’re wiped out. All Karakoram splitboard bindings come standard with Dual Ride-Stride forward lean. With a -8° forward lean setting, Stride Mode allows you to stride and glide further with every step. Dual Ride modes allow you to effortlessly switch between railing carves and surfing turns. Drive Mode consists of a preset useradjustable forward lean (0°-22°), and surf mode can be activated without unstrapping (11° or 0°). Simply turn and go. Dual RideStride is the fastest and easiest forward lean adjustment available.

Smooth Touring Pivot – Independent sleeves rotate freely on a fixed thru-axle, similar to a bike axle, making these stiff and smooth. They're wide for touring rigidity, they shed snow well, and the quick-releasing bracket allows for simple transitions.

Dual Speed Riser with Heel Lock Pole Basket Flip – Flip up/down with pole basket on the fly. Retractable Heel-Lock included.

Heel Lock – On-the-fly heel lock down Release load equivalent to DIN 6 Heel-Lock folds out of way when not needed

Dual Ride 2.0 – Active Joining pulls your splitboard together and keeps your feet spring-loaded to the board, giving you direct power transfer to the edge and instant response in a way that passive, slide fit splitboard systems cannot.

Active Joining – No slop with instant response. Pre-loaded contact points create an ultra solid connection between your bindings and splitboard.

Interlocking Seam Tabs – No separation: tabs interlock across the seam of your board, interlocking and pre-loading the two halves for a solid ride.

Snow Ejection Channels – Made from a carbon infused nylon, the Ride Mode 2.0 is designed to reduce snow build up and clear snow easily.

7075-T6 Open Chassis – CNC’d completely from 7000 series space grade aluminum, the open chassis allows your bindings to twist naturally with your board. Say no to dead spots under your feet.

Nomad X Type Heelcup – 2X stronger than standard aluminum. CNC core outs maximize the strength-to-weight ratio. The high sidewall supports boot for better power transfer and grip while side hilling.

Drop-On Change Overs – Active joining allows for a loose fit then closing the lever LOCKS your binding to board, removing all play from the system.

Flex (1 Soft - 10 Stiff) – 6

Air-Pod Straps – Made from P-Lite TPE, which is 30% lighter than standard TPU. These lightweight straps feature Independent Pressure Pods that articulate to eliminate pressure points.

Carbon Buckles – Made from recycled carbon fiber tow, these buckles are not just strong and light they use carbon fiber that is destine for landfills.

C4 Carbon Highback – Reducing weight while adding a little stiffness to a trusty Reactive Highback contour. Made from Karakoram’s proprietary Carbon Nyolite.

Flex (1 Soft - 10 Stiff) – 8

Compatible with Standard Splitboard Inserts

Compatible with Karakoram PRIME Quiver-Connectors

Women Specific Fit – The women’s binding line includes four models with women’s specific sizing- lower highbacks, short binding length and narrower toe box, smaller ankle straps and smaller toe straps. They fit small feet and have the same ripping features as the men's line.

Includes – Bindings, Prime Splitboard Interface 2.0 with Tour Brackets and DualSpeed Risers w/ Heel Lock

Direct Power Transfer – Wide binding contact = power transfer directly to edges & tip to tail.

Wide Contact Points – Wide binding contact equals power transfer directly to edges and tip to tail.

Quiver Ready

70% Mohair / 30% Nylon – Jones Nomad and Nomad Pro climbing skins are both made with a blend of 70% natural mohair fiber and 30% synthetic nylon. The mohair offers unmatched glide and a supple skin feel while the nylon improves grip and water repellency.

PFC-Free Material

Universal Tip Clip

Universal Tail Clip

Ever Dry – Jones skins are treated with Ever Dry anti-glopping treatment. The coating keeps the skins from absorbing moisture and prevents snow/ice build-up under the skin.

Grip Tech – Grip Tech skins are made with a special material that works well under dynamic tension and has a high resistance to twisting and abrasion.

Rubber Safer Skins – Jones Nomad Pro skins are laminated with a rubber backing that prevents skins from getting water logged. Drier skins are safer as they are less likely to lose adhesion to your skis in critical situations.

Includes – One pair of skins, one pair of Universal tail clips, four rivets, two backing sheets, skin cutter, skin bag, and cheat sheet.

Compatible with All Splitboard Brands