HALFcamber60 – The Cardiff HALFcamber places camber where it is absolutely necessary and gradual rocker everywhere else. The result is maximum glide, maneuverability and edge control. HALFcamber60 means 60% of the running surface is cambered.

PROflex (1 Soft - 10 Stiff) – 156cm: 6 // 160cm: 7 // 164cm: 7

PERFECTpivot 2.0 – Every Cardiff snowboard is uniquely designed to match the shape to the camber - resulting in a new standard of performance.

RADIcALSIDECUT™ – Blend of Radial and Progressive sidecuts are used on all CARDIFF boards to give each board a unique character.

CARBONcore – Cardiff Enduro cores feature a poplar-paulownia construction with vertical layers of carbon fiber in-between. This simple detail helps the core retain its shape for years.

FULLplank™ – Cardiff splitboard cores run tip to tail with special reinforce-ments in the binding and touring hardware locations.

TRIAXglass – Two layers of triaxial fiberglass above and below the core

UNIwall – Seamless urethane sidewalls fuse to cores to create the most durable and damp ride available - featured on Enduro Series decks.

BOARDERpatrol Technology – BOARDERpatrol technology uses poplar stringers which fuse with the UNIwall seamless urethane sidewall to reinforce the edge and provide an incredibly damp ride.

RACEbase™ G – Black graphite infused sintered base for maximized glide and easy repair.

SHRredges™ 2.0 – Sharpened and beveled 2.0mm Hardened Rockwell 48c steel edges for maximum durability and precise control

ENDUROcap – Enduro and Pro Carbon splitboards use a scratch resistant dimpled topsheet for maximum performance and protection

Art by Cardiff

BIloba™ SP – All CARDIFF splitboards feature a chamfered inner edge of the split ski at both the tip and tail to allow for hood free touring and damage free connection

NOVERhang – NOVERhang - Cardiff creates wider-wasted high performance boards that will accommodate larger boot sizes without toe drag... you're welcome.

SWALEtail™ SP – Our unique recurved tails on all CARDIFF splitboards will accommodate a variety of skin tail-clips even those designed for skis

SPLITtech Optimized – All CARDIFF splitboards are optimized for both soft-boot and hard-boot touring setups. Hard-boots typically have longer sole lengths than soft-boots and hard-boot bindings such as Phantom Alphas sit lower to the surface of the splitboard. This requires a slightly wider deck underfoot, which all of our splitboards feature. Our splitboard cores are reinforced in the connection areas and bindings to handle additional forces from the metal and other hard bindings.

Weight – 156 = 3038g // 160 = 3284g // 164 = 3473g

Charger Pinless Dual Lock System – With zero room for a pin a in the center of the disk, the Charger split disk connection is now stronger than ever. A small notch in the rear split disk allows for the Chargers easy to use lever to lock you into place.

Ride Mode – With zero room for a pin a in the center of the disk, the Charger split disk connection is now stronger than ever. A small notch in the rear split disk allows for the Chargers easy to use lever to lock you into place.

Flex Rating – 8/10

SP3 Duraflex CB – This carbon-injected base is stiff and distributes 100% of the energy from edge to edge.

Forged Carbon Heelcup – Lightweight, responsive, and made in Italy, Forged Carbon heelcups are 45% lighter than standard Extruded Aluminum heelcups and still just as bombproof. Backed by Union’s lifetime warranty guarantee.

Exoframe 5.0 Ankle Strap – Rapid response, trusted by professional snowboarders.

TS 4.0 Toe Strap with Pin – Multi-positional options and thermoplastic anti-slip material keeps you locked in and on point.

Tool-Less Adjustability

Magnesium S1 with Aluminum Base

Grade 8.8 Steel Hardware

EXP4 Duraflex ST – Designed for longer tours and bigger backcountry lines. The EXP4 highback features 15% more fiberglass than the standard EXP3. This stiffer asymmetrical highback shape offers more support on long traverses and quicker edge to edge power for the ride down.

Fits Standard Splitboard (Voile) Insert Pattern

In the Box – Mounting hardware, Charger split disk w/ magnesium adapter plates, quiver disk w/ magnesium adapter plates, touring brackets, and splitboard strap.

Non-Stick EVA Disk Cover

Integrated Climbing Bar

70% Mohair / 30% Nylon

Ever Dry 3.0 DWR – PFC-Free

Ready2climb – The ready2climb skin can be cut to a specific ski in just two minutes without any special tools. The adjustable loop can be fixed to any type of ski.

Grip – Pomoca uses a combination of materials and weaving techniques to combine glide and durability with gripping power. Proper alignment and the fiber attachment systems make Pomoca skins very stable under all conditions and for the life span of the skin.

Glide – This exclusive process gives ski tourers extra glide with less effort. This treatment, applied at the end of the production process and to to entire length of the fiber, makes the skin glide and resist moisture more effectively. Skins with Glide offer an effective process for the entire life of the skin, and unique anti-glopping performance.

Safer Skin Light – Pomoca has succeeded in making it's classic Safer Skin membrane lighter. Thanks to finer layers in the membrane, Safer Skin Light is 12% lighter (150g / m² less). Safer Skin Light makes each pair 60 - 75g lighter, while remaining 100% waterproof and providing slightly less wear resistance.

Includes Pomoca Skin Trim Tool and Storage Bag

Trim to Fit Any Splitboard

This product may contain chemicals known to the State of California to cause cancer, or birth defects, or other reproductive harm.