HALFcamber65 – HALFcamber places camber where it is absolutely necessary and gradual rocker everywhere else. The result is maximum glide, maneuverability and edge control. HALFcamber65 features camber underfoot on 65% of the deck.

PROflex (1 Soft - 10 Stiff) – 146cm: 5 // 150cm: 5 // 154cm: 6 // 158cm: 7 // 162cm: 7

PERFECTpivot 2.0 – Every Cardiff snowboard is uniquely designed to match the shape to the camber - resulting in a new standard of performance.

146 and 150: 12mm of taper

154, 158 and 162: 20mm of taper

CARBONcore – Cardiff Enduro cores feature a poplar-paulownia construction with vertical layers of carbon fiber in-between. This simple detail helps the core retain its shape for years.

TRIAXglass – Two layers of triaxial fiberglass above and below the core

UNIwall – Seamless urethane sidewalls fuse to cores to create the most durable and damp ride available - featured on Enduro Series decks.

BOARDERpatrol Technology – BOARDERpatrol technology uses poplar stringers which fuse with the UNIwall seamless urethane sidewall to reinforce the edge and provide an incredibly damp ride.

RACEbase™ G – Black graphite infused sintered base for maximized glide and easy repair.

ENDUROcap – On both Enduro and Pro Carbon splitboards, Cardiff use a scratch resistant dimpled topsheet for maximum performance and protection

Art by Kyson Dana

NOVERhang – NOVERhang - Cardiff creates wider-wasted high performance boards that will accommodate larger boot sizes without toe drag... you're welcome.

Enduro Build – The Enduro build is for those that require the most durable, reliable and high performance equipment. This build features Cardiff's CARBONcore and triaxial fiberglass construction which creates a torsionally rigid ride and adds strength to the board for increased durability.

SWALEtail™ SP – Our unique recurved tails on all CARDIFF splitboards will accommodate a variety of skin tail-clips even those designed for skis

BIloba™ SP – All CARDIFF splitboards feature a chamfered inner edge of the split ski at both the tip and tail to allow for hood free touring and damage free connection

SPLITtech Optimized – All CARDIFF splitboards are optimized for both soft-boot and hard-boot touring setups. Hard-boots typically have longer sole lengths than soft-boots and hard-boot bindings such as Phantom Alphas sit lower to the surface of the splitboard. This requires a slightly wider deck underfoot, which all of our splitboards feature. Our splitboard cores are reinforced in the connection areas and bindings to handle additional forces from the metal and other hard bindings.

Nylon – Durable Nylon construction repels water, glides smoothly, and grips the snow firmly for optimal backcountry performance on long ascents and rolling terrain.

Dual Angled Hooks

Extended Slot Design

Long Lasting Glue

Compatible with All Splitboards

Improved ST (Smooth Touring) Mode – Spark injection molds a proprietary thermoplastic over existing aluminum or steel parts in a process called "overmolding," reducing friction and improving durabillity.

ST Whammy Bars – Overmolded plastic blend where the climbing wire meets the baseplate to eliminate stickiness. (Note: not backward compatible with previous Arc, Surge or other older models)

ST Touring Brackets – Overmolded with low-friction proprietary plastic over and through the bracket holes in the aluminum base - strong, smoother pivoting, and lasts 4 times longer than the old brass bushing.

CNC Machined Baseplates – CNC machined baseplates remain solid for max stiffness and durability. All of the baseplate side windows have been partially filled to increase durability and strength

Pillow Line Straps – Pillow Line Straps are lightweight, durable, comfortable, waterproof, one-piece molded construction, and made 100% in-house. Surge ST ankle straps are wide and asymmetrical around the boot for incredible all-around support. Toe straps are designed to be used as a toe cap, but also fit nicely as a traditional strap across the top of the boot.

Ladders and adjusters are produced in-house with unique thermoplastics that maintain flex over a wide temperature range.

Proven Burton Buckles

Asym Rip 'N' Flip Highbacks – Asymmetrical design features individual left and right highbacks that slope inward matching the rider’s stance / The upper section is flatter for improved lateral mobility / More material at the base for increased longevity and durability / Higher bottom edge won’t snag on boots with crampon welts or soles that wrap high on the heel

Tool free micro-adjustable from 0° to 22° for complete customization of your forward lean angle

Flippin’ FLAD toggles between your forward lean angle and -13° touring position for easy transitions.

Made with proprietary custom blended materials for improved strength and durability, while minimizing weight.

Lateral slots for our BD Touring Strap for greater edge control while skinning.

4 discs and 4 baseplates

Aluminum / Nylon

Plus or minus .25" (6.5 mm) of heel / toe adjustment for perfect centering

Plus or minus 30˚ angle adjustments

Infinite stance width and setback options

Works with all Tesla and T1 Spark bindings, as well as Blaze and Burner models