Camber – Camber is the base of snowboarding: you need to have enough edgehold to drive in and out of turns. The camber does exactly that, allowing you to drive your turns longer and release later.

Flex Rating – 7 (1 Soft - 10 Stiff)

Directional Twin

Tapered UnderBite – Each side of the board’s effective edge is segmented into 3 distinct parts that step horizontally inward rather than tapering. Traditional “tapered boards” take the full sidecut and pull the tail inward, which is away from the arc of your turn – this is why they tend to wash out under hard carving. Tapered UnderBite corrects this by increasing the sidecut depth as you move towards the tail creating a corrective “hook” to the taper. The board blends into turns effortlessly, and has the directional drive and float you’d expect from a tapered board.

Triaxal Glass

Sintered Spec – The raw material is pre-consumer recycled (meaning it never left the factory) sintered base material. The heating and extrusion process softens it slightly, but it's still much harder than true Extruded.

Additional Slamback Inserts

2 x 4 Inserts

Flex Rating – 5 - 7 (1 Soft - 10 Stiff)

Flushcup Technology – Designed to hold boots even without a highback, these have a flush inner surface where the highback meets the heelcup. This gives direct energy transfer between boot and binding.

Hanger 3.0 is Nylon with 30% Glass Fiber

Kingpin Tool-Less 2.0 – No tool required—switching from your park to pow board with one set of bindings or changing your bushings on the fly, has never been faster or easier, with now’s kingpin tool-less tech.

Post – Nylon with 50% Glass Fiber

Canted 2.0 Footpillow

Freestyle Highback – Symmetrical geometry, minimal top curve for extra mobility, hidden flex hinge at the top 1/3, and Top Flair, which dampens chatter and eliminates calf-bite

Hyperfuse II Strap – The HYPERFUSE II strap is an evolution and a design refinement over Now's original strap. Inspired by shoe construction, the HYPERFUSE II is a stitch-less, spineless strap. Its inner guts are constructed with nylon webbing that is strong, durable and flexible, and sandwiched between two layers of EVA. The end product is a comfortable and lightweight binding strap.

3D Pro-Grip Toe Strap – Non-slip and grip is what you will have with the 3D Pro-Grip Toe Strap. Ultra grippy, moldable, and can be used on the tip or toe of your boot.

Ankle Hinge Connector – A minimalist but strong hinge design allows your straps to move out of the way, with a stop mechanism to prevent them flopping around.

NOW Tool-less Adjuster Straps

PA66-GF Buckle Levers – Made with the same high grade nylon and glass fiber blend found in posts and discs. This material is light and strong.

Skate Tech – Inspired by how easily and efficiently a skateboard turns, Skate Tech mimics the function of skateboard trucks. Traditional bindings diminish energy transfer by flexing and bending the baseplate, forcing you to crank straps down harder, ride with more forward lean, or run taller and stiffer highbacks. Skate Tech bindings bypass the middle of the snowboard and direct your energy right onto the board's edges, transfering more power to the board with less work.

Combo Mounting Disc 4x4 - Channel – Mounting disc is Nylon reinforced. 4x4 and Channel compatibility. Minimal board fixture. Light and strong

Bushings – Available in Soft (40 shore), Medium (45 shore), and Hard (55 shore)