CamRock – The response of camber with the floatability of rocker. Camber between your feet acts as a spring, keeping your contact points on the ground as you go in and out of turns and allowing you to keep that edge hold longer. Once compressed the camber will accentuate the rocker and lift the nose out more, allowing it to float.

Flex Rating – 5 (1 Soft - 10 Stiff)

UnderBite – UnderBite edges re-distribute a rider’s weight in such a way that it enhances turning ease and edge hold. Creating divots inward at the binding area reduces and disrupts the surface area of the edge that has contact with the snow while the board is turning. This segmentation of the sidecut into 3 key zones focuses your body weight onto areas that initiate, hold and release turns.

Full Poplar – Yes.'s baseline core for tip-to-tail woodcore snowboard construction. A core that strikes a predictable balance between durability and consistent flex and lightweight feel.

Biaxial Glass

Extruded – This material is formed by extrusion and is softer than sintered bases. At the speeds many riders take, this material is actually quicker than sintered bases when waxed correctly. It retains wax better because it's more porous and is easy to fix with a P-Tex stick if it gets scratched.

Art by Guillaume Rousseaux

2 x 4 Inserts

Flex Rating – 6 (1 Soft - 10 Stiff)

Flushcup Technology – Designed to hold boots even without a highback, these have a flush inner surface where the highback meets the heelcup. This gives direct energy transfer between boot and binding.

Hanger 2.0 is Nylon with 30% Glass Fiber – I-Beam wall sections are both rigid and light. Baseless design allows for uninterpreted board flex. Transfers energy to the board’s edges

Canted 2.0 Footpillow

Post – Nylon with 50% Carbon Fiber

Freestyle Highback – Symmetrical geometry, minimal top curve for extra mobility, hidden flex hinge at the top 1/3, and Top Flair, which dampens chatter and eliminates calf-bite

Flex Rating – 6

Asym S-Sense Strap – The minimalist approach of the ASYM S-SENSE strap is everything you want in a strap and nothing you don’t. Thanks to the very light single-piece-injected construction, it contours every type of boot without inducing any pressure points, and it has just the right flex.

3D Contour Toe Strap – If you just can’t get enough grip, then the 3D Contour Toe Strap is what will make the cut. This strap is not only super grippy but also moldable, and can be used on either the tip or top of your boot.

NOW Tool-less Adjuster Straps

Ankle Hinge Connector – A minimalist but strong hinge design allows your straps to move out of the way, with a stop mechanism to prevent them flopping around.

PA66-GF Buckle Levers – Made with the same high grade nylon and glass fiber blend found in posts and discs. This material is light and strong.

Skate Tech – Inspired by how easily and efficiently a skateboard turns, Skate Tech mimics the function of skateboard trucks. Traditional bindings diminish energy transfer by flexing and bending the baseplate, forcing you to crank straps down harder, ride with more forward lean, or run taller and stiffer highbacks. Skate Tech bindings bypass the middle of the snowboard and direct your energy right onto the board's edges, transfering more power to the board with less work.

Highcup Compatibility – Compatible with all hangers. Low profile for extra flexibility. Street, park and pow.

Combo Mounting Disc 4x4 - Channel – Mounting disc is Nylon reinforced. 4x4 and Channel compatibility. Minimal board fixture. Light and strong

Bushings – Available in Medium (45 Shore)