Twin Camber Profile – A twin camber profile makes the snowboard under your feet lively and poppy helping you track straight into jumps and pop ollies over fences.

Flex Rating – 8 (1 Playful - 10 Precise)

A1 Core – Lightweight, snappy, and durable, the all-new A1 Core is made from three renewable species of timber - bamboo, aspen, and paulownia. Aspen-dominant to highlight the snap and response of this wood, it's combined with bamboo at 30 ° underfoot to increase strength, supercharge the edge-to-edge response, and increase the pressure distribution along the edge. They've also placed lightweight paulownia in the tip and tail help to reduce swing weight.

ICG™ 20 Triaxial Carbon Glass – Integrating tip-to-tail carbon fiber stringers into fiberglass layups ensures a smooth power release in and out of turns while increasing pop, liveliness, and longevity of the snowboard without adding unnecessary rigidity.

Carbon DarkWeb™ – A carbon fiber X-pattern that is strategically placed underfoot from edge-to-edge to speed up transitions, increase control, and increase underfoot strength.

SpaceGlass™ Tip and Tail – An American made Aerospace grade precure fiberglass core insert used to provide unmatched structural performance at reduced weight. SpaceGlass™ inserts increase edge hold along contact points, reduce chatter, and provide unequaled durability.

Wax-Infused Sintered 4001 Base – Built using the hardest and fasted sintered base material on the market, the Wax-Infused Sintered 4001 Base holds wax longer than other sintered bases for smoother, longer lasting glide.

3D Nose Contour – 3D contour (spoon) that is gradually blended from the running sur-face deflects soft snow, eases turn initiation, while remaining predictable on hardpack.

recess3d Topsheet – By reducing the amount of materials in low-stress zones, K2 is able to reduce the swing weight of your snowboard, while also reducing chatter in the tip and tail - all without sacrificing strength.

2 x 4 Inserts

Flex Rating – 9 (1 Soft - 10 Stiff)

Module™ Chassis – Featured on all K2’s new bindings, the Module chassis is composed of a fiberglass infused nylon, and minimizes “dead” board flex zones directly underneath the binding. This in turn allows the rider to feel the flex and response of the entire board length, while providing maximum support, security, comfort, and vibration damping.

3° Sugarcane EVA Canted Harshmellow™ Footbed with Pods – Derived from scrap native sugarcane raised with minimal impact on rainforests, the footbeds on the Module chassis represent a huge leap toward the goal of carbon net-neutrality. Integrated with K2’s proprietary Harshmellow™ technology, these eco-conscious footbeds provide grip, cushion, and performance for all day riding in every condition.

This Grips™ Basepad – K2’s proprietary rubber compound, integrated onto the bottom of the Module chassis, provides vibration damping and cushion between board and binding, reducing fatigue and joint impact.

FR1 Highback – The new FR1 Highback harnesses the strength and sustainability of the castor bean, and represents a huge step toward K2's goal of carbon net-neutrality.

Forward Lean Block

Single Density Ankle Strap – K2’s new single density ankle strap harnesses the strength and sustainability of the castor bean, and represents a huge step toward the goal of carbon net-neutrality.

Single Density Toe Strap – K2’s new single density toe strap harnesses the strength and sustainability of the castor bean, and represents a huge step toward the goal of carbon net-neutrality.

MultiMount™ Ankle Strap Mount Points – Featured on the Module™ Chassis, mulitple mount points for the ankle strap on the Module chassis allow for a fine-tuned, custom fit.

Flex Rating – 8 (1 Soft - 10 Stiff)

Articulating Cuff Upper with HDR Premium Synthetics

Intuition® Pro Foam 3D Liner with SpaceHeater™ – A liner designed for comfort and warmth, from start to finish. It features reflective heat blanket panels that work to trap heat in and keep cold out. These reflective heat blankets work alongside heat moldable Intuition® foam, internal J-Bars, and 3D molded dual-density EVA insoles to keep your foot comfortable and warm all day long.

3-Point Harness Liner Lacing System – The 3-Point Harness is a straightforward solution that doesn’t skimp on support. This system aims to optimize heel hold, while providing ankle support and unrivaled stability to help reduce fatigue.

H4/M3 Focus BOA® Fit System – A two reel BOA® Fit System that allows for the upper and lower zones of the boot to be tightened independently

TX3 Lacing – BOA®’s first textile lace in the snowboarding category, TX3 is constructed from recycled PET with a structural core. This lace provices a softer, more flexible look similar to the characteristics of a traditional lace but the superior closure of a BOA® system.

3D Dual Density Footbed

Vibram® V5 Outsole – Vibram® V5 Outsole features a full EcoStep rubber (30% regrind) with and Harshmellow™ pods under the toe and heel to reduce noise underfoot. The V5 Outsole is the perfect combination of sustainability and performance.

Harshmellow™ – Harshmellow™ is a magical dampening system that replaces industry standard foam dampening materials. Harshmellow™ is strategically placed to dampen vibration underfoot to provide for a more “quiet” feel underfoot, reduce vibration from impact, and reduce fatigue while snowboarding.

Endo™ 2.0 – Endo 2.0 is the most technically advanced boot construction available. An injected heel counter construction adds strength and durability to your boot, giving it the same response season after season. The Endo 2.0 design allows for a more precise and smooth flex with a snappy rebound to power you out of any landing or turn. With an ultra durable TPU construction, the Endo 2.0 provides lasting comfort, response and durability for all styles of riding.

S’Cafe™ Coffee Mesh – With functionality and sustainability in mind, K2 coffee mesh is made from recycled post-consumer coffee grounds that is combined with post consumer recycled polyester. This mesh enhances odor control and moisture management of our standard lining mesh and is made from 95% recycled material with no added chemicals.

Eco-Friendly Packaging – 80% Recycled FSC® Certified Carboard Packaging / 99% Recycled Packaging Paper