Directional Combination Camber Profile – The best of both worlds. By blending both traditional Camber and Rocker profiles, Combination Camber gives you all the benefits of both; the pop and precision of camber, and the float and predictability of rocker.

Flex Rating – 5 (1 Playful - 10 Precise)

Volume Shift™ – Volume is moved from the tips and tails of traditional snowboard shapes and placed underfoot where it can be better controlled. This makes a wider, shorter design that maintains the same float and stability of a traditional board, but increases mobility and maneuverability. Size down 3-5cm from your uaual snowboard length.

BAP Core – Bamboo. Aspen. Paulownia. K2 has blended three species of renewable timber to assemble a core that’s strong, lightweight, and designed to enhance dampening without the addition of other materials.

Carbon Backbone™ – Tip to tail cambered carbon insert running down the center of the snowboard adds response and rebound for precise control on approaches and landing heavy tricks, and adding snap to every ollie.

Ollie Bar™ – A pre-curved carbon fiber strip placed between the binding inserts, the Ollie Bar™ helps by adding extra snap between the feet to increase pop from the highest load-zone.

Biax Glass – Smooth all-purpose performance with a no-frills design. Fibers are woven together at 0° and 90°, creating a more forgiving flex pattern.

Sintered 4000 Base – The sintered 4000 base absorbs wax deep into the material for relentless glide and unrivaled durability.

2 x 4 Inserts

Flex Rating – 7 (1 Soft - 10 Stiff)

Module™ Chassis – Featured on all K2’s new bindings, the Module chassis is composed of a fiberglass infused nylon, and minimizes “dead” board flex zones directly underneath the binding. This in turn allows the rider to feel the flex and response of the entire board length, while providing maximum support, security, comfort, and vibration damping.

3° Sugarcane EVA Canted Harshmellow™ Footbed with Pods – Derived from scrap native sugarcane raised with minimal impact on rainforests, the footbeds on the Module chassis represent a huge leap toward the goal of carbon net-neutrality. Integrated with K2’s proprietary Harshmellow™ technology, these eco-conscious footbeds provide grip, cushion, and performance for all day riding in every condition.

This Grips™ Basepad – K2’s proprietary rubber compound, integrated onto the bottom of the Module chassis, provides vibration damping and cushion between board and binding, reducing fatigue and joint impact.

Team Highback – K2’s new Team Highback harnesses the strength and sustainability of the castor bean, and represents a huge step toward the goal of carbon net-neutrality.

Forward Lean Block

Single Density Ankle Strap – K2’s new single density ankle strap harnesses the strength and sustainability of the castor bean, and represents a huge step toward the goal of carbon net-neutrality.

Single Density Toe Strap – K2’s new single density toe strap harnesses the strength and sustainability of the castor bean, and represents a huge step toward the goal of carbon net-neutrality.

MultiMount™ Ankle Strap Mount Points – Featured on the Module™ Chassis, mulitple mount points for the ankle strap on the Module chassis allow for a fine-tuned, custom fit.

Flex Rating – 6 (1 Soft - 10 Stiff)

Articulating Cuff Upper with HDR Premium Synthetics

Intuition™ Control Foam 3D Liner – Built with a blend of high and medium density Intuition® foam, this is our most versatile liner. With internal and external J-Bars and a 3D molded EVA insole, the Control Foam 3D liner is built to provide all-day comfort and support.

3-Point Harness Liner Lacing System – The 3-Point Harness is a straightforward solution that doesn’t skimp on support. This system aims to optimize heel hold, while providing ankle support and unrivaled stability to help reduce fatigue.

H4 / M3 Focus Boa® Fit System – A two reel Boa® system that allows for the upper and lower zones of the boot to be tightened independently.

TX3 Lacing – BOA®’s first textile lace in the snowboarding category, TX3 is constructed from recycled PET with a structural core. This lace provices a softer, more flexible look similar to the characteristics of a traditional lace but the superior closure of a BOA® system.

3D Formed EVA Footbed

This Grips! Premium Rubber Outsole – A K2 exclusive built to offer the best possible performance at the lowest possible weight. An EVA midsole with Harshmellow™ pods makes this quiet underfoot, and a dual rubber compound provides unmatched grip for the parking lot and the boot pack.

Harshmellow™ – Harshmellow™ is a magical dampening system that replaces industry standard foam dampening materials. Harshmellow™ is strategically placed to dampen vibration underfoot to provide for a more “quiet” feel underfoot, reduce vibration from impact, and reduce fatigue while snowboarding.