True Camber – Pop, power, and stability - it's full camber, baby.

Flex Rating – 4 (1 Soft - 5 Stiff)

Forever Flex – All Jones boards are broken in using specialized machinery that mimics extreme riding use to help stabilize the flex and rocker profile of a board for it's lifetime.

Twin Flex Pattern

Blunt Nose – "How a board glides in powder, crust, corn or any snow more than an inch deep is dictated by it's front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the 'snow plow' rounded tip and it's extra swing weight." - Jeremy Jones

Progressive Sidecut – At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

3D Contour Base 2.0 – Moderate 3D-base contours featuring an even balance of 4mm spoon bevel in the nose and 4mm spoon bevel in the tail. Spoon bevel starts at the rocker point.

Power Core – Triple-density full wood core featuring hardwood bamboo stringers for added pop and durability plus paulownia for weight savings.

Triax Fiberglass – Multi-axis, stitched fiberglass laminate that offers a precise and responsive ride in any ­terrain or snow conditions.

Power Sustainable Basalt Stringers – Sustainable stringers made with 100% natural fibers. Basalt stringers improve torsional response and transfer power from under your feet to the tips of the board to help eliminate nose and tail chatter.

Carbon / Innegra Reinforcement – Carbon Innegra fiber forms an ultra-tough hybrid composite layer that dampens the board torsionally and from tip to tail. Made in the USA and featured on the Aviator, Airheart, and Lone Wolf.

Koroyd™ – Koroyd™ is the lightest, most advanced damping core material Jones has ever tested. Koroyd absorbs vibrations and adds response at a fraction of the weigh,t which enhances control and confidence.

Recycled ABS – ABS plastic is one of the necessary evils of snowboard production. Jones improves the sustainability of their snowboards by using only recycled plastic.

Sintered 9900 Base – Sintered Ultra High Molecular Weight polyethylene with carbon additives.

Eco-Plastic Topsheet – Bio-plastic topsheet made from Castor beans. This eco-material is ultralight, chip/scratch resistant and water/snow repellent (snow sticks less to topsheet).

Bio Resin – All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy. The raw materials used to make Super Sap Bio-Resin are co-products or waste products of other plant-based industrial processes. Producing Super Sap requires 33% less greenhouse gas emissions than conventional epoxy.

Wend Natural Wax – Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

Factory Tuned – All Jones snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

2 x 4 Insert Pattern

Personality / Flex: Friendly & Playful – 2 / 5 (1 = Soft and Forgiving, 5 = Stiff and Lively)

Comfort Foam Foot Pillow – Full length EVA foam footbed that maximizes binding comfort while minimizing foot fatigue. The 3D molded footbed surface offers supreme traction for any boot tread pattern and prevents snow build-up.

Hanger 2.0 – Binding hanger design featuring a wider bushing footprint that’s closer to the edges for enhanced board connection and faster energy transfer.

Flushcup Technology

3˚ Canted Foot Pillow

Dynamic Flex Highback – Mid-wide profile and friendly, ergonomic flex helps you turn, tweak and slash.

Asym Highback with Wider Lateral Side for Added Toe Side Turn Power

Stiff Middle Spine for Solid Carving Performance

Flexible Side Edges for Added Freestyle Performance

Tool-Less Forward Lean Adjustment

Highback Flex – 6 (1 Soft - 10 Stiff)

Flip-It Ankle Strap Technology – Side 1: Freeride mode / Side 2: Surf mode

3D Flex Fit 2.5 Toe Straps – 3D Flex Fit 2.5 toe straps stretch for ultimate fit and comfort

Tool-Less Strap Adjustment

Hinge Connector Strap Attachment + Pre-Curved Ladders

Bombproof Buckles – Bombproof buckles made from aircraft-grade alloy featuring ultra-strong levers and springs. Triple action ratchet design increase speed of entry and release.

Freeride Mode – Position the wide half of the strap above the buckle for more lateral support and board response. Use Hard Bushings for maximum response.

Surf Mode – Position the wide half of the strap below the buckle for solid heel support but more ankle flexibility for getting loose. Use Soft Bushings for a looser, more dynamic surf feel.

Included Bushings – Hard - All Mountain / Freeride Mode (Surf Mode bushings available separately)

Skate Tech – The components of the SkateTech design mimic the function of a skateboard truck. The “Hanger” acts as a lever that transfers energy input from the straps to the “Bushings” and onto the board edges. The “Kingpin” acts as the fulcrum for the “Hanger” and magnifies the energy transfer through leverage. Traditional bindings lose energy when the baseplate flexes and bends unevenly. The energy loss forces you to crank your straps tighter and ride with more forward lean to gain the same control. Uneven pressure and tight straps lead to more foot fatigue and pain. By evenly pivoting over the “Post”, the middle of your board flexes more uniformly and your energy inputs are focused directly on your edge. Your feet stay more relaxed and more comfortable because the bindings transfer power to the board with less work.

Universal Mounting Disc – Compatible with 4x2, 4x4 and EST/Channel