Christenson Surf Camber / Rocker – Uprise in the big floaty nose and at the tail end helps to keep you above the soft stuff with easy turn initiation. Camber in the middle provides the power and pop you need for responsive snowboarding.

Personality / Flex: 3 – (1 = Soft and Playful, 5 = Stiff and Aggressive)

Directional Flex Pattern

Forever Flex – All Jones boards are broken in using specialized machinery that mimics extreme riding use to help stabilize the flex and rocker profile of a board for it's lifetime.

3D Contour Base 3.0 – Freeride focused 3D Contour Base featuring a 7mm of spoon bevel in the nose and 0 - 7mm of spoon bevel in the tail. Spoon bevel starts at the rocker point.

Progressive Sidecut – At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

Blunt Nose – "How a board glides in powder, crust, corn or any snow more than an inch deep is dictated by it's front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the 'snow plow' rounded tip and it's extra swing weight." - Jeremy Jones

Bamboo Surf Core – Re-designed triple density Bamboo Surf wood core that features primarily paulownia stringers with bamboo stringers positioned in the pocket of the sidecut for better edge response and turn power.

V-Core – Boards with V-Cores are slightly softer in the very center of the board for improved maneuverability and stiffer through the tip and tail for stability and pop.

Biax Fiberglass – A dual-direction, dual-layer, stitched fiberglass laminate that provides a fun, forgiving and snappy ride.

Power Sustainable Basalt Stringers – Sustainable stringers made with 100% natural fibers. Basalt stringers improve torsional response and transfer power from under your feet to the tips of the board to help eliminate nose and tail chatter.

Recycled ABS – ABS plastic is one of the necessary evils of snowboard production. Jones improves the sustainability of their snowboards by using only recycled plastic.

Sintered 8000 Base – New super durable material made from Ultra High Molecular Weight polyethylene and carbon.

Oversized Recycled Edges – All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.

Traction Tech 3.5 – Like a serrated knife slicing into the snow, Traction Tech improves your edge grip by adding multiple contact points along the running length of your board.

ECO-Plastic Topsheet – Bio-plastic topsheet made from Castor beans. This eco-material is ultralight, chip/scratch resistant and water/snow repellent (snow sticks less to topsheet).

Factory Tuned – All Jones snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Wend Natural Wax – Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

Bio Resin – All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy. The raw materials used to make Super Sap Bio-Resin are co-products or waste products of other plant-based industrial processes. Producing Super Sap requires 33% less greenhouse gas emissions than conventional epoxy.

2 x 4 Insert Pattern

Freeride / Freestyle Pack Inserts – Allows option to center or set back your stance on the sidecut as conditions demand.

Personality / Flex: Happy Medium – 3 / 5 (1 = Soft and Forgiving, 5 = Stiff and Lively)

Comfort Foam Foot Pillow – Full length EVA foam footbed that maximizes binding comfort while minimizing foot fatigue. The 3D molded footbed surface offers supreme traction for any boot tread pattern and prevents snow build-up.

Hanger 3.0 – Binding hanger design featuring a wider bushing footprint that’s closer to the edges for enhanced board connection and faster energy transfer. The Hanger 3.0 is also lighter weight and has a lower inner lateral wall for better ankle mobility and high volume boot fit. Nylon reinforced with 30% fiberglass.

Flushcup Technology

Progressive Flex Highback – Designed for precise and playful response. Symmetric mid-wide profile and medium flex for carving, tweaking airs and riding switch.

Dual Density Design that Gets Progressively Softer from Bottom to Top

Stiff Lower Section for Solid Carving Performance

Flexible Top Section for Lively Freestyle Performance

Tool-Less Forward Lean Adjustment

Highback Flex – 6 (1 Soft - 10 Stiff)

Comfort Flex Ankle Straps – Comfort Flex Ankle Straps are 3D molded to evenly distribute pressure and eliminate strap bite plus asymmetric for customizable response. Flip-It Strap compatible (Freeride mode + Surf mode).

3D Flex Fit 2.0 Toe Straps – 3D Flex Fit 2.0 toe straps dynamically stretch to fit any shape boot. The new minimalist design is even lower profile and every bit as comfortable, durable and responsive as the original design.

Flip-It Ankle Strap Technology – Side 1: Freeride mode / Side 2: Surf mode

Tool-Less Strap Adjustment

Hinge Connector Strap Attachment + Pre-Curved Ladders

Asymmetrical Buckles – Bombproof buckles made from aircraft-grade alloy featuring ultra-strong levers and springs. Triple action ratchet design increase speed of entry and release.

Freeride Mode – Position the wide half of the strap above the buckle for more lateral support and board response. Use Hard Bushings for maximum response.

Surf Mode – Position the wide half of the strap below the buckle for solid heel support but more ankle flexibility for getting loose. Use Soft Bushings for a looser, more dynamic surf feel.

Included Bushings – Hard - All Mountain / Freeride Mode (Surf Mode bushings available separately)

Skate Tech – The components of the SkateTech design mimic the function of a skateboard truck. The “Hanger” acts as a lever that transfers energy input from the straps to the “Bushings” and onto the board edges. The “Kingpin” acts as the fulcrum for the “Hanger” and magnifies the energy transfer through leverage. Traditional bindings lose energy when the baseplate flexes and bends unevenly. The energy loss forces you to crank your straps tighter and ride with more forward lean to gain the same control. Uneven pressure and tight straps lead to more foot fatigue and pain. By evenly pivoting over the “Post”, the middle of your board flexes more uniformly and your energy inputs are focused directly on your edge. Your feet stay more relaxed and more comfortable because the bindings transfer power to the board with less work.

Universal Mounting Disc – Compatible with 4x2, 4x4 and EST/Channel