Alpine V3 Camber – The Alpine V3 profile has a deeper traditional camber that zeroes out before the end of the sidecut. The small zero camber sections provide a more controlled ride while retaining the response and power of a throwback cambered board.

Directional Flex

Flex Rating – 6 (1 Soft - 10 Stiff)

Directional Shape

Progressive Sidecut – This sidecut consists of two or more radii blended together to accommodate the three stages of a turn. It provides easy turn initiation while offering greater control throughout the turn and maximum power while exiting.

0.8" Setback

Panda Hover Core – This ultra lightweight core is made from paulownia and poplar wood, and is enhanced with bamboo Power Rods™ for maximum power and response.

Holysheet™ Tri/Bi Fiberglass – The HOLYSHEET™ fiberglass configuration features fiber weaves with a high tensile strength and low modulus of elasticity. With a higher roving count in the same weight of glass, you can have a stronger and more responsive board without adding extra weight. It features Triaxial fiberglass on top of the core and Biaxial fiberglass beneath, creating a perfectly blended ride while increasing strength and durability.

Magic Bean Resin – This advanced resin system has a bio-content of 60% renewable, agricultural raw material and is produced with no waste or greenhouse emissions. In production, it has a low-temperature requirement with a high yield output. Poppy, powerful, and extremely durable, MAGIC BEAN™ resin yields much stronger and more rigid qualities allowing a decrease in the wood core thickness. This means you get a lighter board while achieving higher energy return.

CarbonFlax Amplifiers™

Full ABS1000 Sidewalls

Hyperdrive™ ADV XT Die Cut Base

360˚ HRC48 Steel Edges

Multitech™ Level 4 DeepSpace™ PAM16000 Silkscreen – The DeepSpace™ Design Theory takes advantage of the thickness of a transparent topsheet. Strategically layering ink on multiple levels from the top and the bottom imbues graphics with a sense of life through depth.

Stainless Steel 2 x 4 Inserts

Flex Rating – 8 (1 Soft - 10 Stiff)

Stage 7 | Duraflex CB – Ultra-responsive Duraflex CB nylon is the key ingredient in an indestructible new design.

Vaporlite HD Bushing – All-new High Density Vaporlite is stiffer and more responsive than traditional Vaporlite, but with all the same dampening characteristics.

Extruded 3D Aluminum Heelcups – Designed for optimum heel hold and minimization of drag, Union 3D Extruded Aluminum heelcups are the strongest in the business.

Canted Footbeds

Stage 22 | Duraflex CB

Tool-less FLAD

ExoFrame 5.0 Ankle Strap

TS 6.0 Toe Strap

Magnesium S1 with Aluminum Base – Union's proven bombproof ratchet system, Magnesium buckles are light, sleek, and durable on the mountain.

Grade 8.8 Steel Hardware – The strongest steel available on the market, Union's use of Grade 8.8 represents a commitment to delivering the strongest and most reliable bindings on the market today.

Camber Disk – 2x4, 4x4, and Channel compatible.

Non-Stick EVA Disk Cover

Flex Rating – 7 (1 Soft - 10 Stiff)

1:1 Lasting – True half sizes.

3D Molded Tongue – For easier lacing and an even flex throughout.

Performance Backstay – Enhanced spine support.

Heel Hold Kit – Customizable inserts for perfect heel hold.

Articulated Cuff – Eliminates shell distortion.

Wide – With 16mm of extra width in the forefoot, it's ready for bigger feet.

Performance Liner – Heat moldable, dual density Intuition foam.

Performance Internal Harness – Built taller for additional support, flexibility, and heel hold.

Double Boa – Dual zone precision fit.

Performance Footbed – Molded Evolution foam with heel cradle, arch support and heel cushioning.

Performance Rubber Outsole – Enhanced grip.

STI Energy Foam – High-rebound cushioning.

Overmold – Fused overlay.