CamRock 3-4-3 – The response of camber with the floatability of rocker. Camber between your feet acts as a spring, keeping your contact points on the ground as you go in and out of turns and allowing you to keep that edge hold longer. Once compressed the camber will accentuate the rocker and lift the nose out more, allowing it to float.

Flex Rating – 7 (1 Soft - 10 Stiff)

Directional Volume Twin

Poplar Paulownia Bamboo – Creates Creates a lighter, more responsive core than the Full Poplar. The Poplar + Bamboo uses the same durable core, lightens it up by replacing 30% of the Poplar with Paulownia and then inserts two bamboo stringers down the full length for added pop and response.

Slamback Inserts

MidBite – MidBite blends the response of a narrow waist width with the stability of a wider nose & tail. The design steps a single section of each sidecut inward between the insert packs. This single long disruption of the sidecut between the bindings creates a narrower waist width, providing quicker edge-to-edge response. Meanwhile, from your bindings out to the end of the sidecut we maintain a wider board width that improves float in pow and is a stable platform for popping, spinning, and landing on any snow type

Art by Guillaume Rousseaux

2 x 4 Inserts

Flex Rating – 6 (1 Soft - 10 Stiff)

Flushcup Technology – Designed to hold boots even without a highback, these have a flush inner surface where the highback meets the heelcup. This gives direct energy transfer between boot and binding.

Hanger 2.0 is Nylon with 30% Glass Fiber – I-Beam wall sections are both rigid and light. Baseless design allows for uninterpreted board flex. Transfers energy to the board’s edges

Canted 2.0 Footpillow

Post – Nylon with 50% Glass Fiber

Freestyle Highback – Symmetrical geometry, minimal top curve for extra mobility, hidden flex hinge at the top 1/3, and Top Flair, which dampens chatter and eliminates calf-bite

Asym S-Sense Strap – The minimalist approach of the ASYM S-SENSE strap is everything you want in a strap and nothing you don’t. Thanks to the very light single-piece-injected construction, it contours every type of boot without inducing any pressure points, and it has just the right flex.

Ankle Hinge Connector – A minimalist but strong hinge design allows your straps to move out of the way, with a stop mechanism to prevent them flopping around.

Toe Hinge Connector

Tool-less Adjuster Straps

3D Stretch-Fit Toe Strap – Sometimes what works best is a simple, streamlined, minimalist design. A 3D strap with Stretch-fit technology allows for better toe cap fit.

PA66-GF Buckle Levers – Made with the same high grade nylon and glass fiber blend found in posts and discs. This material is light and strong.

Skate Tech – Inspired by how easily and efficiently a skateboard turns, Skate Tech mimics the function of skateboard trucks. Traditional bindings diminish energy transfer by flexing and bending the baseplate, forcing you to crank straps down harder, ride with more forward lean, or run taller and stiffer highbacks. Skate Tech bindings bypass the middle of the snowboard and direct your energy right onto the board's edges, transfering more power to the board with less work.

Highcup Compatibility – Compatible with all hangers. Low profile for extra flexibility. Street, park and pow.

Combo Mounting Disc 4x4 - Channel – Mounting disc is Nylon reinforced. 4x4 and Channel compatibility. Minimal board fixture. Light and strong

Bushings – Available in Medium (45 Shore)