CamRock 1-4-1 – The response of camber with the floatability of rocker. Camber between your feet acts as a spring, keeping your contact points on the ground as you go in and out of turns and allowing you to keep that edge hold longer. Once compressed the camber will accentuate the rocker and lift the nose out more, allowing it to float.

Flex Rating – 8 (1 Soft - 10 Stiff)

Directional

Coreless Tail

Poplar Paulownia Bamboo – Creates Creates a lighter, more responsive core than the Full Poplar. The Poplar + Bamboo uses the same durable core, lightens it up by replacing 30% of the Poplar with Paulownia and then inserts two bamboo stringers down the full length for added pop and response.

Tapered Midbite – Tapered Midbite blends the response of a narrow waist width with the stability of a wider nose and narrower tail for powder flotation. The design steps a single sec - tion of each sidecut inwards between the insert packs. This single long disruption of the sidecut between the bindings cheats the waist width narrower, providing quicker edge-to-edge response. Meanwhile, from your bindings out to the end of the sidecut we maintain a wider board width that improves float in pow and is a stable platform. The Step inwards on the front is deeper than the Step outwards on the back creating a slight taper in the tail allowing the tail to be just a little narrower than the nose but without losing the twin feel.

PH Sintered True

Art by James Dalton

2 x 4 Inserts

Flex Rating – 7 (1 Soft - 10 Stiff)

Flushcup Technology – Designed to hold boots even without a highback, these have a flush inner surface where the highback meets the heelcup. This gives direct energy transfer between boot and binding.

Hanger 3.0 Nylon Reinforced with 30% Glass Fiber – The new Hanger H3 features a wider bushing footprint that is closer to the board’s edges for enhanced board connection and faster energy transfer. The H3 also encompasses a reduction in weight, a dropped-down inner lateral wall for better ankle mobility, and is able to accommodate bigger volume boots. To top it off, it also has a new kingpin tool-less 2.0 that is more integrated and user friendly.

Kingpin Tool-less 2.0 – No tool required - switching from your park to pow board with one set of bindings or changing your bushings on the fly has never been faster or easier.

Post – Nylon with 30% Carbon Fiber

ASYM-FRX Highback – Asym geometry, minimalist internal skin with top Padding, lateral hook for added support And power, and top flair, which dampens chatter and eliminates calf-bite

Asym FRS Strap – This new Asym FRS strap features a “power spine” which adds a layer of support and comfort, and is perfect for navigating steep-and-uneven terrain or laying down some hearty power carves. This strap molds perfectly to any type of boot and offers just the right amount of flex. Take advantage of its Flip-it functionality for either freeride or freestyle mode—you choose!

Ankle Hinge Connector – A minimalist but strong hinge design allows your straps to move out of the way, with a stop mechanism to prevent them flopping around.

3D Pro-Grip Toe Strap – Non-slip and grip is what you have with the 3D Pro-Grip Toe Strap. Ultra grippy, moldable, and can be used on the tip or toe of your boot.

Tool-less Adjuster Straps

Toe Hinge Connector

Nylon with Carbon Fiber Buckle Levers

Skate Tech – Inspired by how easily and efficiently a skateboard turns, Skate Tech mimics the function of skateboard trucks. Traditional bindings diminish energy transfer by flexing and bending the baseplate, forcing you to crank straps down harder, ride with more forward lean, or run taller and stiffer highbacks. Skate Tech bindings bypass the middle of the snowboard and direct your energy right onto the board's edges, transfering more power to the board with less work.

Combo Mounting Disc 4x4 - Channel – Mounting disc is Nylon reinforced. 4x4 and Channel compatibility. Minimal board fixture. Light and strong

Bushing – Available in Hard (55 Shore)