C3 Camber – Aggressive dominant camber zones out to the contacts combined with mild rocker between your feet. Subtle Banana rocker gives freestyle freedom with maximum end-to-end stability for big, high-speed lines. For aggressive, skilled riders. EJack, Jamie Lynn, and Fredi K's favorite.

Medium Flex – The most versatile flex in the game for peak performance all over the mountain.

Original Power Construction – 75% Aspen / 25% Paulownia – Light. Environmentally nice. Strong.

Triaxial / Biaxial Fiberglass

Birch Internal Sidewalls

UHMW Sintered Sidewalls

UHMW Tip / Tail Impact Deflection

Eco Sublimated TNT – The highest density UHMW and fastest base material without wax. TNT features a unique dual-layer thermal fusion “phase alteration” process which aligns the molecular chains into an engineered crystalline structure. The titanium layer reflects light and heat, keeping the base at or near snow temperatures. The crystal layer is the fastest base material without wax, making it a very consistent sliding surface in a wide variety of conditions and wax wear lifecycles. Wax to conditions as normal, but the board will remain fast even as wax wears.

Magne-Traction® – Strategically located edge serrations provide unreal edge hold and control in all conditions. Turns ice into powder.

Eco Sublimated Poly Top – High strength, impact resistant, lightweight dimensionally stable UV and temperature resistant top material decorated using an environmentally friendly eco sublimation process.

Art by Jamie Lynn

Mervin Made – Hand made at the Mervin Factory in Washington, USA with zero hazardous waste.

2 x 4 Inserts

Medium-Stiff Flex – Helps with quick, technical maneuvers, even at high speeds. Great for all-mountain carving, powerful freeriding and charging through the terrain park.

Re:Flex™ Binding System – Offers more flex, feel, and cushioning than traditional disc bindings, in a package that's universally compatible with all current mounting systems, including 4x4, 3D® (via Burton Rider Service, sold separately), and the Channel®. The minimized, cored base-plate with Living Hinge™ disc reduces the weight and footprint of the binding, while also bending freely for a more natural flex.

Single Component 30% Short-Glass / Nylon Composite Baseplate – More responsive yet playful. One material throughout creates consistent response and feel for all-terrain domination.

Re:Flex™ FullBED Cushioning System – Offers full underfoot cushioning that maximizes comfort while minimizing fatigue. Anchored to the baseplate, the stealth trap door design makes it easy to access the mounting hardware.

B3 Gel – The same cushioning found in Burton's high-end boots for ultimate dampening that's formulated to withstand repeated impacts without breaking down or hardening up in cold temps.

Single Component Construction – The simplicity of a one-piece hi-back means immediate response. Using Burton's book of material secrets, they can manipulate the overall flex profile -- from buttery to responsive.

Zero-Lean Canted Hi-Back Design – Your legs don't go straight up, and neither should your hi-backs. This ergonomic design follows the natural contours of your left and right legs to maximize control and comfort. Riders who prefer a more playful and relaxed feel will dig the Zero Forward Lean design on select hi‑backs. As always, you can still choose to crank ‘em forward for quicker control when carving or climbing icy pipe walls.

Heel Hammock – A reinforced rubbery material wraps response around the heel of any boot. Run your straps a little looser and still get lightening fast response out of turns with your heel cradled in complete suspension.

DialFLAD™ – The higher the Forward Lean angle on your hi-backs, the quicker your heel-edge turns. Crank ’em forward for icy hits in the pipe, or back ’em off for jibbing.

Asym Hammockstrap™ – Featuring the same minimal and seamlessly comfortable design as the Hammockstrap, this asymmetrical pad and spine shape wraps the boot in response. Flip the straps for increased freedom, or run stock for power and support.

Supergrip Capstrap™ 2.0 – Minimalist design merges two materials into one technologically advanced toe strap. A firmer material in the spine provides a supportive and lightweight skeleton, while a softer over-molded material improves boot wrap and comfort. Featuring Ultra-minimized and fully injected with an over-molded design. Made ultra-durable, glue-less, stitch-less and PU-free construction. 3D curved with a triple axis spine as well as a true wrap toe window.

Flex Slider – Makes strapping-in a breeze with a strategically stretched hinging zone that allows the heel strap to flex and fall fully open. Thanks to science of forced molecular alignment, the Flex Slider is also incredibly strong.

Double Take Buckles with Insta-Click – Be the first to drop in with the rapid ratcheting of Burton's Double Take Buckles. Helical teeth and "Insta-Click" engagement combine for increased torque per crank, faster uptake, and fewer cranks to tighten. The result: vastly improved strength, speed and ease of use.

Compatible with All Major Mounting Systems – Please note, the 3D Hinge Disc is required for mounting on 3D systems (not included).

Re-Ground Materials to Reduce Waste