Alpine V1 Profile – The ALPINE V1 Profile design features mid-body camber with a flat tail and a reverse cambered nose. This allows for tons of pop and stability on hard pack while increasing float and landing power, improving the rider’s performance in deep snow. The camber runs longer in the tail—providing extra power for the ascent or for larger riders drawn to a dedicated wide series.

Flex Rating – 6.5 (1 Soft - 10 Stiff)

New Age Directional – NEW AGE DIRECTIONAL sidecuts are progressive sidecuts, which also incorporate a reverse sidecut arc in the midsection of the board. Due to a reduced effective edge as a result of hybrid camber shapes, this reverse camber arc provides a point of contact to retain control throughout the turn and is affectionately referred to as DEATH GRIP™.

Thermopolymer Hover Core™ – Enhanced with bonded post-consumer recycled Thermopolymer channels into ultra-lightweight select grain wood core strips, the THERMOPOLYMER HOVER Core™ is extremely light and strong with excellent dampening properties.

3 x 25 mm Carbonflax™ Amplifier – CARBONFLAX™ is a next-generation natural flax fiber woven with carbon strands that is featured in our high-end snowboard constructions. This fusion tape brings the best of two worlds: the reactive energy of carbon and the lightweight and dampening aspects of flax. The two fibers are highly compatible since they have similar properties regarding thermal expansion and failure strain, creating a uniformly flexing reinforcement that's light, snappy and durable all in one.

Triax/Triax Holysheet™ – The HOLYSHEET™ fiberglass configuration features fiber weaves with a high tensile strength and low modulus of elasticity. With a higher roving count in the same weight of glass, you can have a stronger and more responsive board without adding extra weight. Triaxial fiberglass is placed on both the top and bottom of the core providing maximum strength, durability and performance.

Carbon Fleece Power Shield™ – With two Carbon Fleece power pads underfoot, maximum thrusting power is achieved for ollies and stability under varied-terrain while torsional forgiveness allows for ease of command in battle.

Magic Bean Resin – This advanced resin system has a bio-content of 60% renewable, agricultural raw material and is produced with no waste or greenhouse emissions. In production, it has a low-temperature requirement with a high yield output. Poppy, powerful, and extremely durable, MAGIC BEAN™ resin yields much stronger and more rigid qualities allowing a decrease in the wood core thickness. This means you get a lighter board while achieving higher energy return.

Inlaid Alloy Skid Plates – Reinforced with an ultralight skid plate, refined and reshaped to shave weight.

Full ABS1000 Sidewalls

Hyperdrive™ ADV XT Base – Custom formulated and exclusive to The MotherShip, engineers have worked tirelessly with the world's leading polyethylene running base supplier to create HYPERDRIVE™. With exceptional anti-friction properties due to high molecular mass and specialized processing aids, this sintered material has a proprietary composition and is beyond fast. Our loyal fans charge hard, and we have integrated the fastest, meanest base available. Capita increased the thickness of our XT bases for enhanced durability

Moonshot Omni-Tune™ – Aftermarket performance stone grind structure straight from The Mothership, optimized for regular and switch riding.

360˚ HRC48 Steel Edges

Skinless™ Core Ash Woodgrain Topsheet – Specially treated pure wood veneer topsheet with a unique tactile feel that is 220gm lighter than the standard process.

Stainless Steel 2 x 4 Inserts

Response – 8 (1 Soft - 10 Stiff)

Toe Heel Stiffness – 8 (1 Soft - 10 Stiff)

Lateral Stiffness – 8 (1 Soft - 10 Stiff)

Carbon Auto Base

Heel Pedal – The heel pedal activates the automatic closing of the hiback and straps, and locks the engagement system. This mechanism is self-cleaning to avoid snow build-up, and there are three engagement clicks for increased security.

Release Lever – Push to unlock the engagement system and lift your boot up & out. The release lever is located on the medial side of the baseplate for maximum ergonomic effi ciency and protection from external triggers.

Heelcup Roller – The heelcup roller reduces friction and guides the heel of the boot down, for buttery-smooth entry and exit.

Slip-N-Grip Plate – Reduces friction with the outsole of your snowboard boot. Allows you to easily slide in and out, without compromising the underfoot comfort of 2.5° Bankbeds.

Nylon Multidisk – 4HP + 3HP + Channel

Carbon S Ultraback

Reclining Highback – The Reclining Hiback creates the fastest automatic entry system. It fully folds down, creating a large opening to conveniently drop in your boot.

Exo-Kush Pro S Hybrid Straps

Hexo Toe Cap with Aux Tech – A 3D Hinged Auxetic pattern for unmatched formfitting the toebox of your boot.

Active Strap – As you recline the hiback, the footstrap gets actively lifted out of the way, so you can easily and conveniently get your boot in and out. The straps hug your boot with the tightness at which you first set them, each & every time you drop in.

LSR 2.0 Auto-Lock Carbon – Locking Slap Ratchet buckles lock down to secure your preferred footstrap tightness. Either Set-it and Forget-it for the Automatic mode, or just use them like regular buckles for the two-strap experience.

Drop In Technology – This technology was developed to allow easy opening and closure in complete safety. Multiple notches allow the binding to lock shut from the first click; there are three in total, which allow closure even if obstructed by snow accumulation. Just in case you’re in steep or off-camber terrain...or waist deep powder.

2.5 Degree Canted Footbeds