System Rocker – If you want a surfy ride, natural float, buttery turns and spins, and catch-free tracking across the snow - all with highly reliable edge hold - then Arbor's System Rocker shapes are for you. System Rocker progressively reduces the amount of rocker toward the tip and tail and allows the outside contacts to easily engage when max edge hold is needed.

Flex Rating – 5 (1 Soft - 10 Stiff)

3D Terra Technology – Arbor's 3D shaping provides added stability and float in deep snow with increased volume edge to edge.

Grip-Tech – A tri-radial sidecut design that is not "blended." Natural shaping intersections, that in the past were eliminated, have been transformed into heel and toe contact points that provide a direct, more ergonomic way to grip the snow when additional control is needed.

Taper – 10 mm

Offset Fenders 5° Nose / 3° Tail – 3D shaping lifts the contact points for improved turn initiation without shortening the camber section of the board. As a result, you get a clean ride without any loss of the pop that comes from full-length camber.

Highland II Core – A 10 / 20 blend of Poplar and Paulownia for a lighter, more responsive version of the Highland Core

Mixed Glassing – A triax over biax lay-up that's best for versatility: pow, backcountry, groomers, jumps and more.

360° Fully Wrapped Sidewalls – Eliminates the need for tip fill, while effectively tying the whole snowboard together. A technology that delivers incredibly tight tolerances for improved board life and durability.

Sintered Base – A higher molecular weight, sintered base that provides added durability and speed.

Factory Tuned – Arbor detunes the tip and tail contact points on all of their snowboards for a catch-free ride before they leave the factory.

Recycled Steel Edges – Highly durable, recycled steel edges embody Arbor's key values: quality and sustainability.

Real Wood Powerply – Sustainably harvested, majority coming from borer-kill trees, off-white to light brown, the canvas for Arbor’s hand-dyed designs.

Bio Resin – Bio-Resin is a replacement for traditional petroleum based resin that doesn't affect performance or usability. The ingredients that go into it are sourced as co-products or waste products of other industrial processes and are manufactured employing green chemistry techniques that reduce the carbon footprint of the material by up to 40% when compared to its petroleum based equivalent.

Wend Natural Wax – All Arbor snowboards hit the shop floor ready to ride with Wend Natural Wax.

Sustainable Wood Materials

Leaving It Better

2x4 Fourteen Pack Inserts

Flex rating – 3 (1 Soft - 5 Stiff)

System X – The System X design evenly distributes a rider's energy into their snowboard. No matter where pressure is applied to the binding, the System X allocates energy across the baseplate's structural X shape, and out to the four cardinal points. The result is quicker, more effective control. 15% glass content for added strength and stability.

50A Durometer Outsole – The Outsole is a dampening interface made from a special TPE rubber. The Outsole integrates with the System X design and sits between the binding and a rider's snowboard. The Outsole diffuses high-frequency chatter while providing rebound and cushion for high-impact landings. On the Cypress, Arbor uses a slightly stiffer durometer TPE for added performance.

Adjustable Extruded Aluminum Heelcup – Highly durable extruded aluminum, designed to work with the Mini-Disk for amazing adjustability. Use the highback to center the foot and the disk to fine-tune your stance width.

Fiberglass Reinforcing – The Hemlock and Sequoia, feature a 15% glass content for a softer, more forgiving ride; while the Cypress have 30% glass content for added strength and stability

EVA Footbed

Tool-less Forward Lean Adjustment

Hemlock 2 Asymmetrical Highbacks with 5° Lateral Pre-Rotation

BioStraps – Arbor’s plant-based BioStrap takes the place of harmful petrol-based plastics focusing on heel lock and secure fit, with a comfortable curvature and low profile, single-injection ankle strap. Stronger, lighter, more sustainable, and the first of its kind.

Bow-Strap Adjuster – Arbor's patented "Bow-Strap" adjuster and ladder strap swings out of the way quickly and easily, making binding entry a simple, user-friendly experience. The pre-curved strap steers clear of your boot while maintaining form and durability in even the coldest conditions.

Fiberglass Reinforced Nylon Buckles and Levers

Cast Aluminum Buckles and Levers – Offering ultra-reliable performance with long-term durability and a tighter, stronger click for an unparalleled boot-to-binding connection.

2x4 Universal Mini-Disc – Mini-Disks require less surface area and along with the System X help provide a more organic snowboard flex underfoot. They are channel compatible.