System Camber – If you want a highly responsive ride, crisp on-edge performance, and more pop for carving and ollies - all with smoother camber performance - then System Camber shapes are for you. The camber progressively reduces toward the tip and tail, making the leading edge less aggressive for cleaner on-snow performance.

Flex Rating – 8 (1 Soft - 10 Stiff)

Grip-Tech – A tri-radial sidecut design that is not "blended." Natural shaping intersections, that in the past were eliminated, have been transformed into heel and toe contact points that provide a direct, more ergonomic way to grip the snow when additional control is needed.

Taper – 19mm

3° Fenders – 3D shaping lifts the contact points for improved turn initiation without shortening the camber section of the board. As a result, you get a clean ride without any loss of the pop that comes from full-length camber.

Highland III Core – A 5 / 20 blend of Poplar and Paulownia for lighter weight and higher performance. The HIGHLAND III has the highest ratio of Paulownia to Poplar

Mixed Glassing – A triax over biax lay-up that's best for versatility: pow, backcountry, groomers, jumps, and more.

Double Carbon Stringers – Two carbon fiber stringers run from the tip to tail providing added pop, snap and landing durability.

Recycled ABS – When a plastic alternative is unavailable, as in the case of ABS sidewalls, Arbor does its best to opt for a recycled material to improve the sustainability of their products.

360° Fully Wrapped Sidewalls – Eliminates the need for tip fill, while effectively tying the whole snowboard together. A technology that delivers incredibly tight tolerances for improved board life and durability.

Sintered Base – A higher molecular weight, sintered base that provides added durability and speed.

Recycled Steel Edges – Highly durable, recycled steel edges embody Arbor's key values: quality and sustainability.

Factory Tuned – Arbor detunes the tip and tail contact points on all of their snowboards for a catch-free ride before they leave the factory.

Bio Plastic Topsheet – One of the materials Arbor uses in the quest to eliminate harmful petroleum based plastics from the production cycle. Made from castor bean oil, this eco-topsheet is extremely durable and water repellent.

Bio Resin – Bio-Resin is a replacement for traditional petroleum based resin that doesn't affect performance or usability. The ingredients that go into it are sourced as co-products or waste products of other industrial processes and are manufactured employing green chemistry techniques that reduce the carbon footprint of the material by up to 40% when compared to its petroleum based equivalent.

Wend Natural Wax – All Arbor snowboards hit the shop floor ready to ride with Wend Natural Wax.

Inlaid Powerply Stringer

Sustainable Wood Materials

Leaving It Better

2x4 Fourteen Pack Inserts

Flex Rating – 8 (1 Soft - 10 Stiff)

Stage 7 | Duraflex CB – Ultra-responsive Duraflex CB nylon is the key ingredient in an indestructible new design.

Vaporlite HD Bushing – All-new High Density Vaporlite is stiffer and more responsive than traditional Vaporlite, but with all the same dampening characteristics.

Extruded 3D Aluminum Heelcups – Designed for optimum heel hold and minimization of drag, Union 3D Extruded Aluminum heelcups are the strongest in the business.

Canted Footbeds

Stage 22 | Duraflex CB

Tool-less FLAD

ExoFrame 5.0 Ankle Strap

TS 6.0 Toe Strap

Magnesium S1 with Aluminum Base – Union's proven bombproof ratchet system, Magnesium buckles are light, sleek, and durable on the mountain.

Grade 8.8 Steel Hardware – The strongest steel available on the market, Union's use of Grade 8.8 represents a commitment to delivering the strongest and most reliable bindings on the market today.

Camber Disk – 2x4, 4x4, and Channel compatible.

Non-Stick EVA Disk Cover