Resort V2 Directional Profile – This revolutionary all-terrain shape provides the best of both worlds. It has a raised camber platform through the inserts to retain high-speed edge hold through variable terrain, elevated contact points to land and float in powder, and Flat Kick tip and tail arcs for faster, more aggressive transitions.

Flex Rating – 6.5 (1 Soft - 10 Stiff)

Directional Flex

New Age Progressive Death Grip™

Hover Core – An energetic core that is ultra light and strong with excellent dampening properties.

3 x 25 mm Carbonflax™ Amplifier – CARBONFLAX™ is a next-generation natural flax fiber woven with carbon strands that is featured in our high-end snowboard constructions. This fusion tape brings the best of two worlds: the reactive energy of carbon and the lightweight and dampening aspects of flax. The two fibers are highly compatible since they have similar properties regarding thermal expansion and failure strain, creating a uniformly flexing reinforcement that's light, snappy and durable all in one.

Holysheet™ Tri/Bi Fiberglass – Developed over a three-year span, this advanced resin system has a bio-content of 60% renewable, agricultural raw material. It is plant based that does not compete with primary food sources and is produced with no waste or greenhouse emissions. In production, it has a low-temperature requirement with a high yield output. This resin system is poppy, powerful, and extremely durable.

Magic Bean Resin – This advanced resin system has a bio-content of 60% renewable, agricultural raw material and is produced with no waste or greenhouse emissions. In production, it has a low-temperature requirement with a high yield output. Poppy, powerful, and extremely durable, MAGIC BEAN™ resin yields much stronger and more rigid qualities allowing a decrease in the wood core thickness. This means you get a lighter board while achieving higher energy return.

Full ABS1000 Sidewalls

Hyperdrive™ Base – Exclusively formulated, sintered, ultra-high molecular weight, ultra-high density polyethylene, custom engineered with special additives. Rated for the most depraved speed junkies only.

Die-Cut Base

360˚ HRC48 Steel Edges

PLT™ Topsheet Technology – PLT™ technology is exclusive to CAPiTA MFG and magically bonds the topsheet to an already pressed snowboard.

Digital + Screen with Gloss/Matte Print

Pearlescent Underlay

Stainless Steel 2 x 4 Inserts

Flex Rating – 7 (1 Soft - 10 Stiff)

Stage 9 | Duraflex ST – Built with a purpose. The Stage 9 Duraflex ST Baseplate offers Union’s highest levels of strength and energy transmission to date. Backed by Union’s lifetime warranty guarantee.

Molecular Bushing System – Union’s all new Molecular Bushing Suspension System acts as an additional layer of dampening and shock absorption between you and your snowboard.

Stage 9 Baseplate Gasket – The final layer of the of the Stage 9 base. The baseplate Gasket holds the molecular bushing in place, and adds another layer of dampening and vibration cancelling.

Extruded 3D Aluminum Heelcups – Designed for optimum heel hold and minimization of drag, Union 3D Extruded Aluminum heelcups are the strongest in the business.

Canted Footbeds

Stage 19 | Duraflex ST – Layered highback construction allows riders to achieve stronger edge to edge response while still maintaining tortional flexibility for a comfortable ride.

Non-Stick HP EVA – The next evolution of Union’s non-stick EVA technology. Non-Stick Hot Press EVA creates a closed cell finish that’s 100% waterproof. Gone are the days of snow and ice build up on your bindings

Tool-less FLAD

ExoFrame 6.0 Ankle Strap – Padded comfort meets response. The all-new Exoframe 6.0 Ankle Strap features Union's new Molecular Ankle Strap Padding all the way over the edge of the plastic Exoframe strap body. This new design helps to minimize foot and ankle fatigue by reducing pressure points.

TS 5.0 Toe Strap – The TS 5.0 Toe Strap easily shapes to any snowboard boot and offers maximum grip from all angles.

Magnesium S2 with Steel Base – Union's proven bombproof ratchet system, Magnesium buckles are light, sleek, and durable on the mountain.

Grade 8.8 Steel Hardware – The strongest steel available on the market, Union's use of Grade 8.8 represents a commitment to delivering the strongest and most reliable bindings on the market today.

Camber Disk – 2x4, 4x4, and Channel compatible.

Flex Rating – 5 - 9 (1 Soft - 10 Stiff)

Vans Flex Control System – Removable high-rebound Hytrel® tongue stiffeners allow riders to custom-tune their flex. Slide them both in for maximum support, use just one to provide either increased lateral or medial response or leave them out for a softer-flexing boot. As boots soften up over the course of a season, you can add the tongue stiffeners back in to extend the life of your boots.

Instep Flex Zone – The Instep Flex Zone functions to maintain natural ankle flexion in your boot, whether in or out of your bindings.

Asymmetrical Flex Zone

Powercuff Strap – Providing extra support at the top of the boot for increased stability and response. Its configuration gives riders customizable levels of engagement and the option of wrapping the strap around the internal liner or the exterior tongue.

Pleasurecuff – The supple elasticity of the PleasureCuff delivers a cushioned, comfortable fit that keeps your calves supported.

V3 Ultracush with TNF FlashDry Liner – The most advanced liner ever from Vans, this inner features The North Face's FlashDry fabric, which transfers and eliminates moisture. An UltraCush layer provides all-day comfort with minimal seams, and a neoprene forefoot gives a natural flex. A dual-density heat-moldable core is bolstered by the latest X-Cage--extra security and heel hold that keeps you in contact with your board at all times.

V3 Boot Harness – This advanced support harness delivers the highest level of support to the ankle and instep, keeping the V3 liner and boot shell locked in and connected.

Vans Hybrid Plus Boa – The Hybrid system merges traditional lacing with the power of Boa closure at the instep. The Hybrid Plus system expands the range of flex control by adding an extra Boa pass around the back of the boot and across the instep to optimize the lines of pull and maximize flex control.

Vans Custom Slide Guide – Anatomical shape provides adjustable fit anywhere along the instep area for added comfort and unrivaled heel hold.

V3 POPCUSH Footbed – A triple density footbed that combines impact cushioning with energy transfer, the V3 POPCUSH fights fatigue with anatomical shaping, arch support, a moisture-wicking topsheet and OrthoLite® open-cell top foam.

V3 Superenduro Waffle Outsole with All-Trac™ Rubber – Inspired by the extended cross- country and off-road demands of moto enduro racing, the V3 SuperEnduro outsole is designed to offer maximum performance in and out of your bindings. Multi-directional tread design? Surface-level texturing? A TPU toe pick? Check, check, and check. There’s no keeping up with this all-terrain apex predator.

Waterproof Breathable Valves – Moisture management through waterproof valves ensures breathability--meaning dry socks, dry feet, and a more comfortable and longer ride.

Heat Retention 360º – All Vans snowboard boots feature a newly improved thermal retention layer that provides a 360° wrap of the toe box and between the outsole and the liner. This essential layer keeps heat in and cold out, ensuring all-day warmth and comfort.