Early Rise™ – Tip and tail lift away from the snow to bring the contact points closer to the center of the ski. This increases a ski's lift in deep snow and allows it to engage more quickly on hardpack.

Rocker Proflie – 3mm Tip / 4mm Camber / 2mm Tail

Directional Flex – The softer tip floats and initiates turns easily while the stiffer tail provides power, stability and high speed control.

5-Cut™ Geometry – Five different radiuses are blended into the ski's sidecut. The result? A wide variety of turn shapes and an intuitive feel.

Aspenlite™ Core – 100% Aspen wood for the lightest, most nimble feel.

Carbon Magic Fingers™ – A wide array of carbon stretching from tip to tail for added stability without sacrificing weight.

Capwall™Construction – Combining the precision of sidewall underfoot, and the lightweight, durable performance of cap construction in the tip and tail, Capwall™ Construction provides the best of both worlds.

Sintered 1.3 mm Base – Sintered bases reduce friction against the snow allowing for more speed, and more durability due to the high-density material they're crafted from.

2.1mm x 2mm

Stance Back from Center – 57.1 mm

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.

LDN Toe – (Low, Direct, Neutral) Low profile toe, very close to snow.

Automatic Wing Adjustment – Adapts automatically and easily to your boot width and height. It also keeps release values constant for worn out boots.

Automatic Toe Height Adjustment

3 Part Heel Light – Low profile design with lighter construction

Low Profile Chassis – A low stand height improves your feel for the terrain and enhances power transmission to the ski.

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.

Adaptive Fit Cuff System – These boots come with a special spoiler in the back of the cuff. If you want a classic, cozy fit around the calf you can just leave the spoiler in. If you want more volume you can take the spoiler out. This makes the boot cuff slightly lower at the back, more tuliped and more open (equivalent to one cuff size larger). It's quick, easy and you don't need tools.

Dual-Sided Cuff Alignment

Last: 100 mm – Designed for average width feet with average and slightly taller insteps.

Memory Fit – Advanced heat-fitting technology creates a fully personalized shell, cuff and liner in minutes. The key is Memolink, Atomic's special additive that improves the moldability and stretch of their plastics. Expansion can be up to 6mm forefoot width and up to 10mm ankle width, resulting in a permanent and complete anatomical fit in minutes. See your bootfitter for details.

Flex: 95 – A medium-stiff flex for balanced power and response for intermediate to advanced riders

3M™ Thinsulate™ Insulation – Keeps feet warm and responsive even in extremely cold and damp conditions.

Mimic Gold W Liner – Atomic's new Mimic liners mold thoroughly on both the inner and outer surfaces for a custom fit like you've never experienced.

Cuff – Polyurethane

Shell – Polyurethane

Prolite – Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then builds up reinforcements in key areas where strength is needed - like the Energy Backbone down each boot spine.

Energy Backbone – A reinforced, asymmetric backbone providing extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.

Forward Lean – 15˚

3˚ Shell Rotation

6000 Series Aluminum Buckles

35 mm Velcro Strap

Cantable GripWalk Grip Pads – ISO 23223 Type A