Powder Rocker – 25% Tip Rocker / 50% Camber / 25% Tail Rocker

HRZN 3D Bent Tip and Tail – The Bent family uses the liveliest HRZN 3D, employing a full wrap tip and tail profile for more playful skiing in freestyle terrain.

Directional Shape

Light Woodcore – Made from poplar wood, this core optimizes the ski's weight without sacrificing any shock absorption or stability.

Dura Cap Sidewall – Sidewall for power transmission combined with a small cap for durability.

Atomic Base – High-density sintered bases that are fast in a variety of snow conditions and accept wax readily.

Atomic Edges – Atomic edges are made from steel five times more wear resistant than standard steel, for strength and perfect grip.

Base Edge Angle – 1˚

Side Edge Angle – 3˚

Glossy Topsheet

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.

Full Action Toe | 45 mm Elasticity – Featuring 45mm of elastic travel and 180⁰ multi-directional release, the Full Action toe piece delivers best-in-class retention and release and increased coupling strength (boot-to-binding interface) for maximum power transmission.

180˚ Multi-Directional Release – A true mechanical upward release that functions independently from the heel for the most effective multi-directional protection in the case of a fall.

Dual Standard Concept (ISO 5355 Alpine and GripWalk) – Look strategically reinforced the toe housing, increased the toe ramp, elongated the toe-wings, and created a toe that is compatible with both ISO 5355 Alpine and GripWalk soles.

28mm Vertical Elasticity – 28mm of elasticity in the heel (the most of any binding on the market) yields a reduction in unwanted pre-releasing.

Turntable Heel – Look’s unique turntable design rotates directly under the tibia for reduced risk of injury and provides 28mm of elastic travel to deliver unmatched shock absorption for significant reduction of pre-release.

Smaller Mounting Zone – The shortest mounting zone of any alpine binding available provides less swing weight, improved response, and a deeper, rounder, more consistent ski flex.

7 Points of Contact – More points-of-contact with the boot results in increased lateral energy transmission, drives more power to the edge of the ski and provides superior control, response, and snow feel.

Rolling Control – Look binding components are designed to deliver industry-leading roll coupling strength (boot-to-binding interface). This ensures minimal roll before the boot engages the binding for the most efficient power transmission in skiing.

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.

Last: 100 mm – Designed for average width feet with average and slightly taller insteps.

Memory Fit – Advanced heat-fitting technology creates a fully personalized shell, cuff and liner in minutes. The key is Memolink, Atomic's special additive that improves the moldability and stretch of their plastics. Expansion can be up to 6mm forefoot width and up to 10mm ankle width, resulting in a permanent and complete anatomical fit in minutes. See your bootfitter for details.

Adaptive Fit Cuff System – These boots come with a special spoiler in the back of the cuff. If you want a classic, cozy fit around the calf you can just leave the spoiler in. If you want more volume you can take the spoiler out. This makes the boot cuff slightly lower at the back, more tuliped and more open (equivalent to one cuff size larger). It's quick, easy and you don't need tools.

Energy Backbone – Reinforced along the lines of force at the rear of the cuff

Dual-Sided Cuff Alignment

Flex: 110 – A medium-stiff flex for solid power and response.

3D Stretch Toe Box – Asymmetrically shaped for left and right, the new 3D Stretch Toe Box takes first fit and customization potential to the next level. Its ‘Big Toe Friendly’ construction maximizes the liner’s available length allowing for a little extra stretch when important millimeters are required to achieve the perfect fit.

3D Ankle and Heel

Shell – Polyurethane

Cuff – Polyurethane

Prolite – Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then builds up reinforcements in key areas where strength is needed - like the Energy Backbone down each boot spine.

Energy Backbone – A reinforced, asymmetric backbone providing extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.

Dual Sided Cuff Alignment

Forward Lean – 15˚

Power Shift – Forward lean can be quickly adjusted to 13°, 15° (default) or 17°. Add a bolt on 110 / 120 models to stiffen flex. Remove a bolt on 130 model to soften flex.

Shell Rotation – 3˚

2 6000 Series Aluminum Cuff Buckles

BOA® Fit System Lower Closure – Allows more even distribution of pressure over the forefoot and instep and infinite precise adjustment.

35mm Velcro Strap

Cantable GripWalk ISO 23223 Grip Pads

Size Adjuster / 13° Power Shift Shim / 2nd Power Shift Screw Included