Epoxy Construction – Surfboard shapers have been using this construction method for ages. It produces the extremely light, buoyant, responsive board that surfers love to ride. This type of construction allows for nearly any shape you can think up. The possibilities are endless.

EPS Skelecore with 5mm Stringer – Skelecore is Connelly's advanced core-shaping technique that reduces overall core mass, allowing the fibers of the board to react quicker and more naturally.

Carbon Tail Patch

Surf Style – Surf styles use a multitude of rail shapes, board outlines, and fin setups to accommodate different riding styles and skill levels. There's more than one way to ride a wave and Connelly recommends trying them all.

Fang Tail – This shape allows for a longer rail in the tail of the board with less volume. In conjunction with the channels on the base of the board, water releases from these points for a fast and loose feel.

4'6" Size – Rocker Height: 2.3"/0.4"

4'10" Size – Rocker Height: 2.3"/0.4"

Center Channel in Tail

Quad Fin – The need-for-speed fins setup. Two front fins are accompanied by two smaller rear fins. Both sets are flat foil, which allows for water to pass through the centerline without resistance while the curved outer surface creates lift and hold into the face of the wave.

Quad Futures Fins – 2 - 3.1" / 2 - 2.1"

Do Not Store in Boat Board Racks – evo does not recommend storing your wakesurfer in boat board racks. Many wakesurf boards are fragile and can be easily damaged by these racks, which is not covered under manufacturer warranty.

Ghost Grip with Rear EVA Pad