Continuous Rocker – The rocker line that started it all. Speed and a fluid, predictable pop define this rocker profile designed to carry pace into the wake with minimal drag. A continuous rocker generates a longer trajectory with similar pop every time.

Minimum Swing Weight Profile – Thinning of the tip/tail profile for an effortless feel while spinning flat and during inverts.

Variable Thickness Profile – Fluctuating thickness of the board, most commonly a thickness reduction on tip & tail outside the stance platform.

Variable Edge Profile – Forgiving between the inserts, the edges sharpen towards the tip and tail.

Biolite 3 Core – The secret recipe HL has been perfecting since day one. This core is the gold standard in the industry and used throughout the line. Bio 3 is HL's lightest and most durable formula to date.

Layered Glass – Over time, traditional woven glass fibers will separate. With layered glass, this deck will have the same pop off the double up year after year.

Monocoque Construction – Integrating the top glass and the bottom glass into one. Generating a more durable board on side impacts to prevent delamination.

0.7" SS Beam 4-Pack – Beam Fins are modeled after a traditional molded-fin, providing a looser feel than P-Wing and A-Wing Fins. Beam Fins have a running length of 8.5" and can break free when desired.

M6 Inserts – Delivers a more secure fit of the bolts to the inserts, improving bolt retention keeping binding hardware locked down.

Shaped by Greg Nelson – Wakeboard legend and hall of fame inductee Greg Nelson's shaping philosophy utilizes subtle features for easy to ride boards that still perform for the best in the world.

Mid Support Level – Material selection engineering to offer a softer more flexible feel.

Articulating Cuff – Pivot point allowing lower foot & upper ankle sections to flex independently.

Easy On Fit – Binding opens wide easing entry to begin your session.

Adjustable Sizing – Adjustable toe design & floating tongue offer different shoe sizes a secure fit.

Dual Lace Closure – Upper and lower lace closures provide adjustability & customization.

Low Pro Plate System – The Low Pro Plate System takes much of what Hyperlite learned from the System Binding and incorporates it into a more traditional design. They began by reducing the overall volume by nearly 16%, which translates into a much lighter boot. The drop-through footbed keeps a rider closer to the deck for maximum control and response. To ensure the baseless design did not produce unwanted plate twist, they connected the sidewalls to chassis create a stronger foundation.

Aluminum Mounting System – Reinforced stability plates with a raised teeth interlocking design, reducing heel lift and solidifying your connection.

Molded EVA Footbed – Ergonomically molded EVA provides comfort and support for ability levels, impact protection and arch support included on all Hyperlite footbeds.

Universal 6" Mounting Spread – Industry standard insert pattern - Mates with every wakeboard on the market today.