Directional CamRock 4-4-2 – Yes' CamRock camber rocker blend places camber between your bindings and rocker at the tail and nose. Having areas of variable rocker outside of your stance with camber underfoot gives you the response, stability, pop, and playfulness you desire for park, plus increased flotation and turning abilities in deep snow.

Flex Rating: 4.5 (1 Soft - 5 Stiff) – This snowboard has a stiff flex rating, indicating it will provide you with an aggressive, responsive and fast ride. Good for charging groomers, deep powder, slalom courses, and even jumps. Stiff snowboards won't wash out on you easily because they are responsive, have insane turning abilities, and remain stable.

Directional

Tapered UnderBite – The Tapered UnderBite fixes the issue of washing out during hard carves by a) keeping the sidecut parallel to its corresponding one on the other side of the board, and b) increasing the sidecut depth as you move towards the tail creating a corrective "hook" to the taper. The board blends into turns effortlessly, has the directional drive and float you'd expect from a tapered board, but it holds an edge and rockets out of turns like nothing else.

Weightless + Carbon PowerDrive – The PYL uses a lighter weight Poplar and Paulownia composition that is milled with two custom programmed channels about 30mm in from the edge, running parallel to the sidecut. Inserted into these channels are pre-bent bamboo stringers wrapped in carbon. The end result is a highly responsive core that precisely matches and compliments the outline of each board.

Triax – Triax laminate consists of fiberglass that is braided in three directions. Meaning it gives the snowboard an asymmetrical flex with lengthwise stiffness. For you, this delivers a snowboard that has tons of pitch when jumping.

ABS – Durable, flexible, infinitely reliable.

Sintered True – True Sintered bases are harder and more expensive than extruded bases and can be faster for those that ride aggressively fast. But to do that, it needs to be waxed and prepared for local conditions.

Die-Cut Base – Base color displayed may not be available. Base colors may vary.

Underbite Edges – By stepping the outline in under the bindings (rather than out), it disrupts the surface area that has contact with the snow while the board is on edge. Without any extra rider effort, this disruption effectively increases edge pressure on the areas where you need it most, helping to initiate and hold your turn. The effect is stable edge control and a very confident, enhanced arc in your turn with no drag.

2 x 4 Insert Pattern