Power Camber – An innovative traditional camber profile tweaked to offer the insane edge response of camber without the usual hang-ups. The camber radius tapers to flat toward the tips and the base is beveled up one degree at the edges from the contact points of the camber to the ends of the board. The base beveling releases the edges where they like to hook which balances the pop and directional stability of camber with a looser, less-catchy feel.

Flex Rating (1 Soft - 10 Stiff) – 7

Spoon 2.0 – Moderate 3D-base contours featuring an even balance of spoon bevel in the nose and spoon bevel in the tail. Spoon bevel starts at the rocker point.

Blunt Nose – "How a board glides in powder, crust, corn or any snow more than an inch deep is dictated by it's front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the 'snow plow' rounded tip and it's extra swing weight." - Jeremy Jones

Progressive Sidecut – At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

FSC™ Power Core – Triple-density full wood core featuring hardwood bamboo stringers for added pop and durability plus paulownia for weight savings.

Carbon Triax Fiberglass – A multi-layered tri-axis fiberglass meshed with carbon fiber power bands. Carbon power bands dampen vibrations and keep board stable at speed.

Fiberglass Reinforcement – Fiberglass layer improve pop in nose and tail plus increases the longevity of the flex profile. This lightweight layer helps the board perform the same on day 100 as it did on day one - precise and playful.

Recycled Rubber – Dampening material is made of 100% recycled rubber.

Recycled ABS – ABS plastic is one of the necessary evils of snowboard production. Jones improves the sustainability of their snowboards by using only recycled plastic.

Sintered 9900 Base – Sintered Ultra High Molecular Weight polyethylene with carbon additives.

Flip Flop Base – By flip flopping the base graphic colors, P-Tex waste is drastically reduced by increasing the material yield.

Mellow Magne-Traction™ – Like a serrated knife slicing into the snow, Magne-Traction improves your edge grip by adding multiple contact points along the running length of your board. "Magne-Traction is a critical feature for rockered boards. Rocker improves glide in mixed conditions, but the decreased edge contact makes it harder to really lock into your turns and hold a solid edge. Magne-Traction is crucial to offset the edge drift of rocker." - Jeremy Jones

Oversized Recycled Edges – All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.

Eco-Plastic Topsheet – Bio-plastic topsheet made from Castor beans. This eco-material is ultralight, chip/scratch resistant and water/snow repellent (snow sticks less to topsheet).

Factory Tuned – All Jones snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Wend Natural Wax – Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

2 x 4 Insert Pattern