UD Carbon Frame with Internal Cable Routing + Integrated Upper Guide

Plastic Fantastic – Uni Directional Carbon with One Piece Molded construction from one of the best factories in the business.

Delta Suspension System – The DELTA system was conceived to, among other things, achieve very complex leverage rate curves that can be used to tune for varying track conditions, spring, and damper parameters. Ultimately the design achieves a high degree of suppleness early in the travel, with a very predictable high traction stage through the middle and a bottomless ramp at the end of the travel.

Flip Chip – At the heart of the Delta System is a simple chip that Evil calls the Flip Chip. At its most basic, the Flip Chip allows riders to change bottom bracket height and head angle by flipping the chip. This adjustment leaves the leverage rate curve and orientation of the linkage unchanged. The slight offset in bearing bore creates a simple interface that allows the rider to personalize their ride. It's about finding what works for the way you ride and the terrain you ride in.

RockShox Super Deluxe RCT Shock – Solid Threshold adjustment for pedaling performance, compression adjustment to fine tune the ride to any trail and condition, and the proven performance of RockShox’s revolutionary Super Deluxe rear shock in a package that’s ready to tackle any challenge.

Shock Adjustments – 2-Position Lever (Open, Pedal) / Low Speed Compression Adjustment in Open Mode / External Rebound / Air Spring Pressure

Sag Meter – Evil added a fancy integrated SAG meter into the non-drive side Delta Link to make suspension set up easy. Push it forward, sit on your bike, adjust air pressure to 30%, then shred.

Integrated e13 Chainguide – Fully integrated carbon chainguide to keep that chain on. Lower chainguide and bash guard compatible.

Internal Cable Routing – Internal routing for stealth dropper posts. Rear derailleur and brake routing is cleanly routed under the toptube and the rear derailleur cable is internally routed through the swingarm to keep things tidy.

Rubber Protection – Molded Rubber Downtube Protector keeps rocks and debris off the plastic and quiets the ride. Integrated rubber protection for the chainstay and seat stay to keep things peaceful and quiet in the woods.

Custom ISCG05 Mounts – Custom ISCG05 tabs to accommodate Evil's lower guide collaboration with e13 components.

Bolt On Rear Axle – Evil's new axle bolts directly into the derailleur hanger for stiff hassle-free operation.

Boost Rear Axle Spacing – 148mm x 12mm

RockShox Pike RCT3 – The new RCT3 Charger 2 damper provides a wider range of low speed compression adjustment in the Open mode, while Pedal mode has been re-tuned for excellent trail support. The firm setting has also been re-tuned to better match RockShox rear shocks, with OneLoc compatibility which allows on-the-fly suspension control.

Fork Adjustments – 3-Position Lever (Open, Pedal, Lock) | Low Speed Compression in Open Position | External Rebound | Air Spring Pressure

SRAM Descendent 6K Crankset – The Descendant 6K crankset delivers consistent performance every time out. Featuring SRAM's X-SYNC™2 tooth profile chainring, the Descendant crankset is engineered for complete chain control. Each tooth’s thickness is precisely toleranced and controlled to work seamlessly with the SRAM chain’s inner and outer links.

SRAM GX Eagle™ Trigger Shifter – The challenges of riding a mountain bike should be kept to roots, rocks, mud, trees, jumps, drops and breathing. Putting total control of your gear selection into the thumb of one hand, it’s simple to find the right gear, right now. The GX Eagle™ trigger shifter is the control center of the Eagle™ drivetrain. Its internal works have been updated to include a 12th gear, and improved to enhance trigger feel, precision and durability.

SRAM GX Eagle™ Rear Derailleur – This new GX derailleur not only answers the Eagle™ drivetrain’s need for greater capacity, but it’s also the next evolution of the proven, 1x-specific X-HORIZON™ design. The larger, 14-tooth X-SYNC™ lower pulley allows 10- to 50-tooth cassette, and also adds to Eagle’s overall smooth-pedaling feel. The new, Type-3 ROLLER BEARING CLUTCH™ features a smoother torque curve for a quieter, more consistent operation and feel. CAGE LOCK™ has been moved back and out of the way, protecting it from trail debris. And a redesigned, robust mounting system further improves the Eagle™ derailleur’s performance and overall durability.

SRAM XG-1275 Eagle™ Cassette – Ride anywhere with this wide range XG-1275, 10- to 50-tooth Eagle™ cassette that provides the right gear. Fast on the flats. Control on the climbs. Dictate your own pace, anywhere. Only Eagle™ technology is the 1x drivetrain engineered for infinite freedom. FULL PIN™ technology uses lightweight, stamped steel cogs held together with high-strength stainless steel pins. The result: a cassette that’s light and strong. The open design similar to the X-DOME™ cassette aids in mud clearance, giving you cleaner shifting performance and longer component life. New X-GLIDE™2 improves both inboard and outboard shifting, as well as chain retention.

SRAM GX Eagle™ Chain – The GX Eagle™ chain is designed with SRAM’s Eagle™ geometry, the GX Eagle™ chain features solid pin construction, Eagle™ PowerLock® and smooth, efficient shifting that you can count on every time out.

SRAM Guide R Brakeset – What’s it going to take to ride that line? It’s steep. It’s rocky. You’ve passed it a hundred times. But not this time. With the all-new SRAM Guide R, you have the power. Proven 4-piston calipers give you smooth, one-finger control. Features like Reach Adjust let you dial it in just right. And Guide perfectly complements other SRAM components and gives you flawless performance on every ride. Now featuring the World Championship-winning S4 caliper with Bleeding Edge™ and Heat Shield technologies.

Avid Centerline Rotors – The new Centerline Rotor was designed to keep the center of friction consistent throughout rotation thereby minimizing vibration offering consistent performance and a quiet ride.

e*thirteen TRS Race Wheelset – From all day epics to your next enduro race, the TRS Race wheels are ready for anything. All-aluminum hubs maximize durability, and the rim provides superior dent resistance without breaking the bank. The 30mm inner width provides a perfect platform for 2.2-2.4" tires.

Maxxis Minion DHF Front Tire – The Minion DHF was designed for the often loose and muddy conditions of aggressive all-mountain terrain. The DHF incorporates ramped knobs for low rolling resistance and channel-cut knobs to increase gripping edges, giving straight-line control and precise cornering.

Maxxis Minion DHR II Rear Tire – With side knobs borrowed from the legendary Minion DHF, but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

RockShox Reverb Stealth Dropper Seatpost – Don’t let its familiar good looks fool you—Reverb is a whole new weapon. Its internals have been completely re-engineered to improve on its already legendary performance and to offer enhanced reliability: all the smallest details, down to the single seal, have been re-evaluated and updated to pass the hardest and longest durability tests. Additional bushing overlap also improves performance over time, while new 150- and 170-millimeter travel options are available to tame even the gnarliest of descents. This is the brand-new Reverb, engineered for the next-generation mountain biker.

Oversize Item – Ships within the continental U.S. for $69. HI and AK shipping available. Please call for details.