99mm FTS Soul 3-Piece Shell – The same 99mm last width and geometry as the Original with a slightly roomier toe box & rubber sole.

Easy On/Off – Tongue fully opens like a convertible, never blocking your foot. Slide your foot in and out easily with comfort in all temperatures.

Flex Rating: 6 (1 Soft - 10 Stiff) – Maximum versatility & reliability in all conditions with a smooth, natural ankle motion to eliminate shinbang! You can quickly change your flex by swapping out different # flex tongues.

Seven Ribs Tongue – The most ribs in the industry designed like a flexible straw to flex naturally with your ankle & eliminate shin bang. Buckle tightness also doesn’t affect flex.

Adjustable Flex – The boot's flex is rated on a simple scale of 1-10 (10=stiffest). Change a boot's flex by simply switching the tongue (additional tongues sold separately).

Infinite Pivot – Unlike traditional designs, the rear cuff never bottoms out. It pivots infinitely forward with your calf for less shell distortion, no shin pain and more control.

Pro Laminate Construction – A combination of EVA foam layers quickly conform and mold to your foot. 4mm Open Cell foam is warm and comfy, 2mm Soft Density cross linked foam in between, and 7mm High Density Closed Cell foam is firm and responsive, to boot… pun intended!

Pro Intuition® Liner – The most power transfer and responsiveness of any Intuition liner®. All adult Full Tilt boots use authentic Intuition® closed cell foam that is body heat activated to mold 100% to your feet and shell during use, or can be heat molded by a shop in minutes.

Power Wrap – An additional layer of ergonomically shaped High Density Intuition® closed cell foam is wrapped around the outside of the upper liner to provide added energy transfer and horsepower to the shell.

Wide Toe – For people with wider feet or who prefer a little more wiggle room in the toe area, a thinner foam is used in the front of the liner to increase space without sacrificing control.

J Bar – A J-shaped piece of foam is added to both sides of the ankle area to dramatically increase ankle hold, keeping your feet perfectly in place for precise control.

Light Weight 3-Piece Shell Construction – Minimalist 3-Piece design eliminates the need for thick, heavy overlapping plastic or bolts for increased quickness & sensitivity, and it is up to 2 lbs / 900 g lighter than some alpine boots.

Forward Lean – Tool-less forward angle adjustment: 4mm or 8mm

Lateral Adjustment – Easy, precise lateral angle adjustment: 12mm

Widetrack Buckles – New adjustment mechanism engineered to increase precision and durability while maintaining on-the-fly single-handed micro adjustment. New durable aluminum lever with a minimalist lightweight design.

Cables – Cable closure works like a shoelace to eliminate dead spots for a smooth even pressure flex & fit.

Power Strap – Nylon power strap gives you what you need to get the job done.

RubberSole – Replaceable rubber soles on the entire toe and heel dramatically increases grip when walking and hiking.

Shock Absorber Boot Board – Soft rubber layer in the sole of the shell absorbs vibrations, impact and shock for a smooth ride.

Customizable – All parts are sold separately for unlimited personalization and repair using a standard phillips head screwdriver.