Last: 98 mm – This performance fitting Cabrio Design Architecture last shape features precise tapering in rearfoot and achilles' zones with narrow forefoot volume. Dalbello’s most accurate and close fitting anatomic last shape features innovative My Fit technology.

Contour 4 – Contour 4 Technology is a revolutionary technological advance in performance ski boot fitting. The anatomical contours of the inside sidewalls of the boot-shell, as well as the innerboot lasts, are precisely “mapped” to the shape of the typical high performance skier’s foot. A little extra “space” is molded into the inside of the boot shell at 4 critical fit points: ankle, heel, 5th metatarsal, and navicular. Contour 4 represents the first level of Dalbello's My Fit System.

My Fit System – The Dalbello legendary fit got an upgrade in more than 60% of the boot range thanks to the My Fit System. Liner and shell can now be thermo customized in addition to the pre-molded Contour 4 shell which is included in every My Fit boot.

Flex: 130 – As stiff as a freeride boot gets; meant for expert skiers who know where they're going and intend on doing it quickly.

Kinetic Response Tongue – Highly resilient polyamide flex ribbed tongue stays in permanent contact with the leg for improved responsiveness and control. Interchangeable flex stiffness.

Switchable Tongues – In addition to Dalbello's 'B' tongue with a flex of 130, the boot also comes with an interchangeable 'C' tongue, which is around 10-15 flex points softer.

Adjustable Flex – Thanks to a modular insert applied between the shell and the cuff, you can decide between 3 different degrees of flexion.

IF Comp – Offers a high performance fit, reduced volume, and medium density ULTEVA heat moldable (4 min) foam. Adaptive Comfort toebox; Lycra/mesh EZ Slide in; Heat system ready

3 Piece Architecture – Dalbello’s critically acclaimed, 3 Piece Cabrio Design architecture has been the cornerstone of their top performance, all mountain and freestyle models for more than a decade. This unique construction combines a 3 piece construction assembly - shell/cuff/tongue – that comfortably secures the foot and lower leg while optimizing smooth and progressive flexibility. Dalbello’s Cabrio models provide the ultimate in responsive performance to ski your best. Accept no imitations.

Polyurethane Bi-Injected Cuff – Two different density materials fused into one structure to combine power (hard) with comfort and a convenient entry (soft).

Kinetic Response Tongue – Highly resilient polyamide (nylon) tongue provides enhanced sensitivity. Improves responsiveness and control.

Shell / Cuff / Tongue – PU (Polyurethane) / Bi-Injected PU / PA (Polyamide)

Dynamically Balanced Stance – Foot angle, cant angle, and cuff inclination engineered into the shell and cuff positions skiers in a balanced and centered stance for optimum dynamic performance.

Twin Axis Canting – Permits skiers to align the lateral inclination of the upper cuff to the skier’s leg. Outside and inside hinge cuff alignment using 5mm hex tool, rotate the mechanism clockwise, or counterclockwise, to align boot cuff to desired position.

Low Cuff Hinge Point – High leverage cuff assembly with hinge points mounted approximately 10 cm lower than standard construction boot designs. The low hinging cuff permits the boot cuff to more easily follow the natural movement of the skier’s legs because it has a longer range of forward and rearward hinging motion.

Adjustable Forward Lean – To change the forward lean angle, Forward Lean control wedges may be inserted between the lower shell and cuff. Wedges are secured to the rear shell with a 3 mm Hex Head Screw. No Insert = 11° / 4 mm Insert = 13° (stock) / 8 mm Insert = 15° (in box).

Micro-Adjustable Aluminum Buckles – A simple turn of a buckle! Micrometer buckles are easy to use for easy fit customization.

Inverted Forefoot Buckle – Forefoot closure buckle above the instep is inverted and designed to close on the top of a boot shell, not the side. The top closure positioning prevents buckle breakage and bending during rail slides, grinds, falls, and transitions.

Dynalink Rearfoot Retention – Dynalink is an independently functioning heel/instep closure band assembly that secures the skiers foot in the middle and rearfoot sections of the ski boot.

Screwed Rivets – Dalbello uses high quality screwed rivets (as opposed to permanent “crimped” rivets) to allow for easier bootfitter access and repair.

Velcro

Orthofit Performance Insole

Solid Lug – A solid lug and a separated and grooved sole gives the skier better energy transfer and a progressive, precise and incisive feel.

Interchangeable Bootboards – This boot comes with 2 switchable bootboards. The Solid Lug bootboard is built for power energy transmission and unmatched sensitivity and ski feel. The Landing Gear bootboard is built for enhanced shock absorption on big air landings or on hard snow surfaces.