Last: 103 mm – A relaxed fit that works well for wider and higher volume feet.

My Fit System – The Dalbello legendary fit got an upgrade in more than 60% of the boot range thanks to the My Fit System. Liner and shell can now be thermo customized in addition to the pre-molded Contour 4 shell which is included in every My Fit boot.

Adjustable Rear Cuff Spoiler – Modular rear boot cuff spoiler adapts the boot cuff to a variety of lower leg shapes. Spoiler permits skiers to increase rear cuff height, add rear support and change forward lean.

Flex: 110 – A stiff flex that's not overwhelming and gives you the flexibility to ski both freestyle and freeride terrain.

Flex Control – Forward flex characteristics may be adjusted to suit skier’s weight, skill level, and snow conditions.

ID Max Liner – Fully heat moldable liner using closed cell Intuition foam, thermoformable in only 6 - 12 minutes. They are the lightest and warmest liners for high performing skiers and offer immediate response and energy transmission.

Cabrio Design – The Cabrio design is a 3 piece construction - shell/cuff/tongue – that comfortably secures the foot and lower leg while optimizing smooth and progressive flex. Dalbello’s Cabrio models provide the ultimate in responsive performance to ski your best.

Shell / Cuff – Polyurethane

Tongue – Polyurethane

Low Cuff Hinge Point – The low hinging cuff permits the boot cuff to more easily follow the natural anatomic movement of the skier’s legs because it has a longer range of forward and rearward hinging motion. For more efficient walking and gliding. Increased power and control with less energy.

Adjustable Cuff Alignment – Permits skiers to align the lateral inclination of the upper cuff to the skier’s leg. Using 5mm Hex Tool, rotate the mechanism clockwise, or counterclockwise, to align boot cuff to desired position.

Hyperband Wide Profile Cuff – Low friction, wide profile shin pad closure securely wraps the upper part of the boot cuff with a wide profile, high leverage cuff closure buckle assembly. Smooth flexing design is highly shock absorbent for maximum boot-top comfort.

Dynalink Heel Retention System – The instep buckle travels in a direct line to the skier's heel, allowing buckle tension to minimize heel lift and sliding.

Micro-Adjustable Aluminum Buckles – A simple turn of a buckle! Micrometer buckles are easy to use for easy fit customization.

Inverted Forefoot Buckle – Forefoot closure buckles (above instep) are inverted to close on top of the bootshell, not on the side. The top closure positioning prevents buckle breakage and bending during rail slides, grinds, falls, and transitions.

Twin Step Closure Rack – Two position forefoot closure buckle accommodates varying foot shapes and instep heights.

Quick Macro Cuff Rack Extension – Extra wide cuff buckle catch can be easily moved into 1 of 3 positions (total range = 30mm) without tools, enhancing the cuff fitting capabilities for a wide variety of leg circumferences and shapes.

Shock Absorption – Landing Gear footboard is a full length urethane platform that absorbs shock on hard snow and big landings.

Anti Shock Heel Insert – High-density elastomeric urethane inserts under the heel absorb shock and reduce vibration.

Replaceable ISO 5355 Alpine Soles

Dura-Grip Replaceable Soles – Durable high durometer polyurethane compound toes & heels for extended boot sole wear.

Grip Walk Outsoles [Sold Separately] – Provides increased safety and improved natural roll thanks to a curved rubber sole and includes a high-profiled, slip resistant sole.