Tatex Flex-Spine – Further fortifying the exterior is our exclusive Tatex Flex-Spine. The Flex Spine stiffens the back of the boot, acting as a shoe-horn for easy entry and also providing a sticky surface to grab your wetsuit leg and prevent flushing.

EZ-O Cuff with Overkill Seams – The EZ-O Cuff design provides a seamless barrier against flushing with a larger panel than other o-ring seals, providing much easier on-off and reducing stress on the seams. To reduce bulk under the wetsuit leg and allow for easier on-off, the EZ-O panel is reduced to 5mm thickness. Since booties take serious abuse, we cut no corners on our neoprene seam construction. The Overkill neoprene seams are triple-glued, blind-stitched, then sealed on the exterior with liquid seam seal for maximum durability and longevity.

Reinforced Stealth-Loop – To ease on/off, Solite has integrated their low-profile Stealth-Loop in the heel. The Stealth Loop is laminated between the neoprene and our co-molded rubber/textile heel reinforcement patch, providing incredible durability and pull-strength. The Stealth Loop is also Tatex-coated for extra strength and zero-water absorption.

Thermal Rebound Lining – These wetsuit booties feature a unique Thermal Rebound plush, quick-dry interior lining material in the upper. This material features a thin, flexible metallic grid-layer between the neoprene and the outer lining, reflecting body heat back to the skin for enhanced warmth. Lab tests on the Thermal Rebound laminate show an increase in insulation exceeding 10%, which extends your sessions and increases your odds of getting the wave of the day.

Round-Toe 1mm Neoprene Heat Booster Sock – These socks are a critical component of the Solite "system", particularly in the frigid waters where the 8mm Custom Fires are used. Benefits of the 1mm Neoprene socks are numerous: Add 5-10F warmth to the boots for longer sessions in frigid conditions. Increase comfort with a soft, plush barrier between the foot and the Thermofoam sole. Make the boots easy on/off with a low-friction outer surface. Keep boots smelling fresh since the socks can be easily washed/dried separately.

360 Wrap Strap – Gives you a direct connection to your board with zero delay in response.

Sizing Tip – Order your regular shoe size or 1/2 size down. For example, if you are a size 10.5, order a 10. If you are a size 10, also order a 10. Women should order 1-1.5 sizes lower to convert from Men's sizing. So if you are a Women's 8, order a Men's 7. If you are a Women's 8.5, also order a Men's 7. If your feet are exceptionally narrow or low volume, you may want to size down even more.

32°F+

Always rinse thoroughly inside and out with fresh water after every use. Hang to dry.