Directional Freeride Camber – Subtle rocker in the nose and tail provide additional float without losing stability. Camber underfoot provides confident edge hold and pop.

Flex Rating – 6 (1 Soft - 10 Stiff)

Directional Freeride with Slight Taper

91% Poplar / 9% Bamboo – Sustainably harvested, this blend keeps the board smooth and powerful.

Tip to Tail Carbon – Carbon fiber run through the entire core from tip to tail to provide added pop and response.

Tri-Axe Glass – Multi-axis, stitched fiberglass laminate that offers a precise and responsive ride in any ­terrain or snow conditions.

Polyurethane – Polyurethane is poured during construction to form a single, unified piece of sidewall wrapping around the entire core for increased strength and durability. Because of this process, it also creates less waste material than other sidewall options.

Sintered Durasurf 4001 – The gold standard in bases. The 4000-series sintered bases have a higher density than other options on the market, and are therefore more durable. Additionally, it absorbs more wax, making for a faster and smoother ride. 4000-series PTEX is usually reserved for only top-of-the-line boards due to a higher manufacturing cost, but at Weston it’s the minimum standard.

Boltless Base

Rugged Topsheet – Polymide is eco friendly and made from castor beans. The topsheet is durable and resistant to scratches and scuffs.

Karakoram UltraClips and Active Joining – Karakoram UltraClips and Tip-Locks use Active Joining to spring load the seam of your splitboard, eliminating the rattling shearing, and rolling inherent to passive slip-fit connections. Simply close the lever to lock in the most responsive ride.

Rooted Inserts – The odds of pulling out inserts on a snowboard are about zero, but just to make sure Weston have reinforced all of the inserts areas with precision-cut sheets of flax. This improved durability and naturally dampens chatter. Additionally, flax is a sustainable crop and is good for the environment.

Split Tech – Weston doesn't skimp on their splits. You'll see a full inner metal edge, complete with sidewall and dampening tape. Also, when facing a kick-turn on a steep slope, you want all the help you can get - that's why Weston balance's their splits so that they are tail heavy.

Standard Splitboard Insert Pattern

Improved ST (Smooth Touring) Mode – Spark injection molds a proprietary thermoplastic over existing aluminum or steel parts in a process called "overmolding," reducing friction and improving durabillity.

ST Whammy Bars – Overmolded plastic blend where the climbing wire meets the baseplate to eliminate stickiness. (Note: not backward compatible with previous Arc, Surge or other older models)

ST Touring Brackets – Overmolded with low-friction proprietary plastic over and through the bracket holes in the aluminum base - strong, smoother pivoting, and lasts 4 times longer than the old brass bushing.

CNC Machined Baseplates – CNC machined baseplates remain solid for max stiffness and durability. All of the baseplate side windows have been partially filled to increase durability and strength

Pillow Line Straps – Pillow Line Straps are lightweight, durable, comfortable, waterproof, one-piece molded construction, and made 100% in-house. Surge ST ankle straps are wide and asymmetrical around the boot for incredible all-around support. Toe straps are designed to be used as a toe cap, but also fit nicely as a traditional strap across the top of the boot.

Ladders and adjusters are produced in-house with unique thermoplastics that maintain flex over a wide temperature range.

Proven Burton Buckles

Asym Rip 'N' Flip Highbacks – Asymmetrical design features individual left and right highbacks that slope inward matching the rider’s stance / The upper section is flatter for improved lateral mobility / More material at the base for increased longevity and durability / Higher bottom edge won’t snag on boots with crampon welts or soles that wrap high on the heel

Tool free micro-adjustable from 0° to 22° for complete customization of your forward lean angle

Flippin’ FLAD toggles between your forward lean angle and -13° touring position for easy transitions.

Made with proprietary custom blended materials for improved strength and durability, while minimizing weight.

Lateral slots for our BD Touring Strap for greater edge control while skinning.

Aluminum Discs with Nylon Bases

Discs – Aluminum

Nylon Bases

3˚ Canting (Inward Angle) – A favorite among hardbooters. Your knees will thank you.

Aluminum Discs – Oversize aluminum center disc overlaps binding channels for maximum strength and rigidity.

Adjustability – +/- quarter inch (6.5mm) of toe/heel adjustment allows for perfect centering. An industry first! +/- 30 degree angle adjustments; infinite stance width and setback adjustments.

Superior Materials – Bindings slide on soft nylon for effortless installation.

Weight – 319 grams

Compatible with All Spark R&D and Other Brands' Puck Compatible Splitboard Bindings (Except K2 Kwicker)

Not Compatible with Regular Spark Puck Screws

Not Compatible with DIY Splitboards, Unless the Voile Factory Hole Pattern Was Used

Not Compatible with Channel Style Boards from Voile, Burton, and K2

70% Mohair / 30% Nylon

Ever Dry 3.0 DWR – PFC-Free

Ready2climb – The ready2climb skin can be cut to a specific ski in just two minutes without any special tools. The adjustable loop can be fixed to any type of ski.

Grip – Pomoca uses a combination of materials and weaving techniques to combine glide and durability with gripping power. Proper alignment and the fiber attachment systems make Pomoca skins very stable under all conditions and for the life span of the skin.

Glide – This exclusive process gives ski tourers extra glide with less effort. This treatment, applied at the end of the production process and to to entire length of the fiber, makes the skin glide and resist moisture more effectively. Skins with Glide offer an effective process for the entire life of the skin, and unique anti-glopping performance.

Safer Skin Light – Pomoca has succeeded in making it's classic Safer Skin membrane lighter. Thanks to finer layers in the membrane, Safer Skin Light is 12% lighter (150g / m² less). Safer Skin Light makes each pair 60 - 75g lighter, while remaining 100% waterproof and providing slightly less wear resistance.

Includes Pomoca Skin Trim Tool and Storage Bag

Trim to Fit Any Splitboard

This product may contain chemicals known to the State of California to cause cancer, or birth defects, or other reproductive harm.