Lib Tech T.Rice Orca Splitboard + Union Charger Splitboard Bindings + evo x Pomoca Pro Glide Splitboard Skins 2024
Model Info
Out of Stock
But fear not - there is plenty to explore...
Shop all Lib Tech Shop sale Lib TechMEMBERSHIP
Earn up to 10% back in rewards. Learn more. Join Free.
LOWEST PRICE GUARANTEE
Find a better price? We’ll beat it by 5%. See our Price Match Policy.
Product Info
Lib Tech T.Rice Orca Splitboard 2024
Bring the spirit of Travis everywhere with the Lib Tech T.Rice Orca Splitboard. It's everything you love about your Orca solid: the floaty early rise nose is made for untouched pow and the tapered C3 camber body both climbs and shreds with ease. But if you think the backcountry means constant untracked powder, think again - big ascents often mean variable descents, and the Magne-Traction edges will see you through the worst the backcountry can bring.
Product Details
Rocker Type
Hybrid C2X
Flex
Medium-Stiff – Stout enough to charge your hardest but without excessive harshness.
Shape
Volume-Shifted Directional – Made to float, aim for 3cm shorter than your normal board.
Split Construction – 5% Aspen / 95% Paulownia
Lightweight Spin Slim at Tip and Tail
Core
Split Construction – 95% Paulownia / 5% Aspen
Laminates
Triaxial / Biaxial Fiberglass with Basalt Alloy – A unique volcanic fiber derived from basalt features amazing strength and dampening properties, allowing the creation of light, strong, and amazingly smooth performance rides.
Sidewalls
Birch Internal Sidewalls
UHMW Sintered Sidewalls
UHMW Tip / Tail Impact Deflection
Base
Sintered Knife Cut Base
Edges
Magne-Traction® – Strategically located edge serrations provide unreal edge hold and control in all conditions. Turns ice into powder.
Topsheet
Eco Sublimated Bio Beans Top – This plant oil based top material is environmentally friendly, rugged, scratch resistant and prints amazingly well with Mervin's eco sublimation process.
Graphics
Art by Adam Haynes
Additional Features
Mervin Made – Hand made at the Mervin Factory in Washington, USA with zero hazardous waste.
Binding Compatibility
Standard Splitboard Insert Pattern
Lightweight, Stainless Steel Karakoram Ultra Clips – For easy use, maximum assembled compression, and minimal seam shearing or rattle.
Specs
-
Terrain:
Splitboarding
More
Terrain
Splitboarding A splitboard snowboard is built specifically for the backcountry rider. Splitboards are designed to break down into two separate halves for touring and uphill travel (with climbing skins). Special bindings are required as well. Once you've reached the top of the terrain feature, you reconnect your splitboard for the ride back downhill. However, it's important to note that you will need appropriate backcountry tools, knowledge of the backcountry, weather and snow conditions and climbing skins to safely take advantage of the freedom of a splitboard.
-
Ability Level:
Advanced-Expert
More
Ability Level
Advanced-Expert Whether you charge the steepest lines, hit the biggest jumps in the park or carve with race-like precision, advanced to expert level skis, snowboards, boots and bindings are for the more aggressive rider. In skis and snowboards, you'll often find layers of metal, carbon or other stringers for rigidity and power, while advanced to expert level boots and bindings are usually on the stiffer side of the spectrum for rebound and precision steering.
-
Rocker Type:
Camber/Rocker/Camber
More
Rocker Type
Camber/Rocker/Camber Camber/Rocker/Camber is a profile that’s specific to snowboards and which works because the rider’s weight flattens the two cambered areas. This design produces a strong, pressured carving zone between the rider’s feet and retains pop and carving precision at the tip and tail.
- Shape: Directional
-
Flex Rating:
Stiff
More
Flex Rating
Stiff The amount a snowboard flexes varies significantly between boards. Snowboard flex ratings are not necessarily standardized across manufacturers, so the flex may vary from brand to brand. Many manufacturers will give a number rating ranging from 1-10, 1 being softest and 10 being stiffest. Here at evo we have standardized the manufacturers' number ratings to a feel rating ranging from soft to very stiff. Generally you will find flex ratings of 1-2 as soft, 3-5 as medium, 6-8 as stiff, and 9-10 as very stiff. Flex ratings and feel may ultimately vary from snowboard to snowboard.
- Core/Laminates: Basalt, Wood
- Edge Tech: Magne-Traction
-
Made in the USA:
Yes
- Warranty: 1 Year
| Size | 150 | 153 | 156 | 159 |
|---|---|---|---|---|
| Effective Edge (mm) | 1070 | 1100 | 1130 | 1150 |
| Tip Width (mm) | 305 | 305 | 308 | 311 |
| Waist Width (mm) | 26 | 263 | 265 | 267 |
| Tail Width (mm) | 296 | 296 | 301 | 302 |
| Sidecut Radius (m) | 7.5 | 8 | 8 | 8 |
| Stance Setback (in) | 1.5 | 1.5 | 1.5 | 1.5 |
| Stance Range (in) | 17 - 24 | 17 - 24 | 17 - 24 | 17 - 24 |
| Width | Regular | Regular | Regular | Regular |
Union Charger Splitboard Bindings 2024
When it comes to splitboarding, the weak link is usually your bindings. That all ends with the Union Charger Splitboard Bindings. Engineered with an innovative dual lock system similar to the toepiece found on tech ski bindings, this pinless design allows for faster, easier transitions from the skin track to the downhill. If you're keen to spend more time shredding and less fumbling with your gear this season, these bindings are for you.
Product Details
Tour Mode
Charger Pinless Dual Lock System – With zero room for a pin a in the center of the disk, the Charger split disk connection is now stronger than ever. A small notch in the rear split disk allows for the Chargers easy to use lever to lock you into place.
Ride Mode
Ride Mode – With zero room for a pin a in the center of the disk, the Charger split disk connection is now stronger than ever. A small notch in the rear split disk allows for the Chargers easy to use lever to lock you into place.
Flex Rating – 7/10
Baseplate
SP3 Duraflex CB – This carbon-injected base is stiff and distributes 100% of the energy from edge to edge.
Extruded 3D Aluminum Heelcup with Astro Washer
Straps
Exoframe 5.0 Ankle Strap – Rapid response, trusted by professional snowboarders.
TS 4.0 Toe Strap with Pin – Multi-positional options and thermoplastic anti-slip material keeps you locked in and on point.
Tool-Less Adjustability
Buckles
Magnesium S1 with Aluminum Base
Grade 8.8 Steel Hardware
Highback
EXP3 Duraflex ST
Compatibility
Fits Standard Splitboard (Voile) Insert Pattern
Additional Features
In the Box – Mounting hardware, Charger split disk w/ magnesium adapter plates, quiver disk w/ magnesium adapter plates, touring brackets, and splitboard strap.
Non-Stick EVA Disk Cover
Integrated Climbing Bar
Specs
-
Ability Level:
Intermediate-Advanced
More
Ability Level
Intermediate-Advanced Whether you’re a progressing intermediate exploring new runs and terrain, or an accomplished rider seeking new thrills, the majority of skiers and snowboarders fall into this level. Intermediate to advanced skis and snowboards may be somewhat wider or stiffer than beginner-intermediate skis and snowboards, usually with a stronger wood core and sandwich sidewall construction. Intermediate to advanced boots and bindings range from softer flexing freestyle options to stiffer choices built for stability at speed.
- Mounting Pucks: Yes
- Warranty: Limited Lifetime (Baseplates & Heelcups), 1 Year (All Other Parts)
evo x Pomoca Pro Glide Splitboard Skins
If you're looking for the best skins in the business, there's one name that stands out from the pack. That's why we partnered with Pomoca to produce the evo x Pomoca Pro Glide Splitboard Skins. Engineered for versatility across the full range of backcountry conditions, these skins combine Pomoca's super grippy mohair / nylon Climb 2.0 plush with their premium Glide treatment for optimal skin track performance. From mid-Winter pow missions to the Spring corn harvest, the evo x Pomoca Pro Glide Splitboard Skins are ready to rumble.
Product Details
Material
70% Mohair / 30% Nylon
Ever Dry 3.0 DWR – PFC-Free
Tip and Tail Attachments
Ready2climb – The ready2climb skin can be cut to a specific ski in just two minutes without any special tools. The adjustable loop can be fixed to any type of ski.
Features
Grip – Pomoca uses a combination of materials and weaving techniques to combine glide and durability with gripping power. Proper alignment and the fiber attachment systems make Pomoca skins very stable under all conditions and for the life span of the skin.
Glide – This exclusive process gives ski tourers extra glide with less effort. This treatment, applied at the end of the production process and to to entire length of the fiber, makes the skin glide and resist moisture more effectively. Skins with Glide offer an effective process for the entire life of the skin, and unique anti-glopping performance.
Safer Skin Light – Pomoca has succeeded in making it's classic Safer Skin membrane lighter. Thanks to finer layers in the membrane, Safer Skin Light is 12% lighter (150g / m² less). Safer Skin Light makes each pair 60 - 75g lighter, while remaining 100% waterproof and providing slightly less wear resistance.
Includes Pomoca Skin Trim Tool and Storage Bag
Compatibility
Trim to Fit Any Splitboard
Proposition 65 Warning for California Consumers
This product may contain chemicals known to the State of California to cause cancer, or birth defects, or other reproductive harm.
Specs
- Material: Mohair/Nylon
- Compatibility: Trim to Fit
- Warranty: 365 Days + 1
| Size | 145 mm x (M) 158-168 cm | 145 mm x (S) 149-159 cm |
|---|---|---|
| Width (mm) | 145 | 145 |
| Length (cm) | 158 - 168 | 149 - 159 |