MEMBERSHIP
Earn up to 10% back in rewards. Learn more. Join Free.
LOWEST PRICE GUARANTEE
Find a better price? We’ll beat it by 5%. See our Price Match Policy.
Ready to get down and shreddy in the backcountry? The Jones Hovercraft 2.0 Splitboard is made for chutes, trees, and big kid bowls beyond the boundary of the resort. Featuring recycled materials and an all new shape: this beast has a floaty nose, directional rocker, and speed boosting 3D hull in the tail. Built with Boltless Karakoram Ultra Clips 2.0 for effortless board to binding connection, the Jones Hovercraft 2.0 Splitboard is perfect for big days on the skin track when you just want to rip the snow down.
Directional Rocker – A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.
Flex Rating – 7 (1 Soft - 10 Stiff)
Forever Flex – All Jones boards are broken in using specialized machinery that mimics extreme riding use to help stabilize the flex and rocker profile of a board for it's lifetime.
Directional Flex Pattern
Blunt Nose – "How a board glides in powder, crust, corn or any snow more than an inch deep is dictated by it's front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the 'snow plow' rounded tip and it's extra swing weight." - Jeremy Jones
3D Contour Base 3.0 – Freeride focused 3D Contour Base featuring a 7mm of spoon bevel in the nose and 0 - 7mm of spoon bevel in the tail. Spoon bevel starts at the rocker point.
Progressive Sidecut – At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.
FSC™ Control Split Core – Dual-density full premium wood core designed specifically for splitboards. 2:1 paulownia to poplar stringer ratio keeps core light yet ultra damp.
Biax Fiberglass – A dual-direction, dual-layer, stitched fiberglass laminate that provides a fun, forgiving and snappy ride.
Recycled Rounded ABS – ABS plastic is one of the necessary evils of snowboard production. Jones improves the sustainability of their snowboards by using only recycled plastic.
Sintered 8000 Base – New super durable material made from Ultra High Molecular Weight polyethylene and carbon.
3D Contour Base 3.0 – Freeride focused 3D Contour Base featuring 7mm of spoon bevel in the nose and 0 to 7mm of spoon bevel in the tail. Spoon bevel starts at the rocker point
Sustainable Flax Top
Karakoram Ultra Clips 2.0 with Tips Lock – Ultra clips are the strongest, lowest profile splitboard clips in the world. They deliver unmatched compression between board halves and they are adjustable so you can maintain even compression as your splitboard ages.
Wend Natural Wax – Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.
Bio Resin – All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy. The raw materials used to make Super Sap Bio-Resin are co-products or waste products of other plant-based industrial processes. Producing Super Sap requires 33% less greenhouse gas emissions than conventional epoxy.
Factory Tuned – All Jones snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.
Bolt-Less Bridge – The Bolt-Less Bridge eliminates split clip attachment hardware from the base of the board by re-profiling the wood core at the clips. The wood core under the clips is thicker providing better torsional stiffness and a more powerful connection at the split clips.
Size | 148 | 152 | 156 | 160 |
---|---|---|---|---|
Effective Edge (mm) | 1161 | 1193 | 1225 | 1257 |
Tip Width (mm) | 302 | 306 | 311 | 316 |
Waist Width (mm) | 255 | 259 | 263 | 267 |
Tail Width (mm) | 285 | 289 | 294 | 299 |
Sidecut Radius (m) | 8.4 | 8.7 | 9 | 9.3 |
Stance Range (mm) | 520 | 540 | 560 | 580 |
Rider Weight (lbs) | 90 - 140 | 110 - 160 | 130 - 180 | 160 - 210 |
Width | Regular | Regular | Regular | Regular |
Conquer the backcountry with the Union Charger Pro, the splitboard binding that's built for both the climb and the ride. Crafted with insights from pro splitboarder Forrest Shearer, the 795g Charger Pro delivers the ideal mix of stiffness and flex for unbeatable performance on both the ups and the downs.
Charger Pinless Dual Lock System – With zero room for a pin a in the center of the disk, the Charger split disk connection is now stronger than ever. A small notch in the rear split disk allows for the Chargers easy to use lever to lock you into place.
Ride Mode – With zero room for a pin a in the center of the disk, the Charger split disk connection is now stronger than ever. A small notch in the rear split disk allows for the Chargers easy to use lever to lock you into place.
Flex Rating – 8/10
SP3 Duraflex CB – This carbon-injected base is stiff and distributes 100% of the energy from edge to edge.
Forged Carbon Heelcup – Lightweight, responsive, and made in Italy, Forged Carbon heelcups are 45% lighter than standard Extruded Aluminum heelcups and still just as bombproof. Backed by Union’s lifetime warranty guarantee.
Exoframe 5.0 Ankle Strap – Rapid response, trusted by professional snowboarders.
TS 4.0 Toe Strap with Pin – Multi-positional options and thermoplastic anti-slip material keeps you locked in and on point.
Tool-Less Adjustability
Magnesium S1 with Aluminum Base
Grade 8.8 Steel Hardware
EXP4 Duraflex ST – Designed for longer tours and bigger backcountry lines. The EXP4 highback features 15% more fiberglass than the standard EXP3. This stiffer asymmetrical highback shape offers more support on long traverses and quicker edge to edge power for the ride down.
Fits Standard Splitboard (Voile) Insert Pattern
In the Box – Mounting hardware, Charger split disk w/ magnesium adapter plates, quiver disk w/ magnesium adapter plates, touring brackets, and splitboard strap.
Non-Stick EVA Disk Cover
Integrated Climbing Bar
Size | S | M | L |
---|---|---|---|
Weight (g) | 795 |
The Jones Nomad Universal Tail Clip Splitboard Skins are ideal for riders on the up and up. Up and up the skin track, that is. They're made with a 70/30 Nylon/Mohair mix for optimal glide, grip, and durability, with an Ever Dry coating that helps eliminate the dreaded skin glop. Untouched zones await, grab the Nomads and go get it!
70% Mohair / 30% Nylon – Jones Nomad and Nomad Pro climbing skins are both made with a blend of 70% natural mohair fiber and 30% synthetic nylon. The mohair offers unmatched glide and a supple skin feel while the nylon improves grip and water repellency.
PFC-Free Material
Universal Tip Clip
Universal Tail Clip
Ever Dry – Jones skins are treated with Ever Dry anti-glopping treatment. The coating keeps the skins from absorbing moisture and prevents snow/ice build-up under the skin.
Grip Tech – Grip Tech skins are made with a special material that works well under dynamic tension and has a high resistance to twisting and abrasion.
Rubber Safer Skins – Jones Nomad Pro skins are laminated with a rubber backing that prevents skins from getting water logged. Drier skins are safer as they are less likely to lose adhesion to your skis in critical situations.
Includes – One pair of skins, one pair of Universal tail clips, four rivets, two backing sheets, skin cutter, skin bag, and cheat sheet.
Compatible with All Splitboard Brands
Size | One Size |
---|---|
Width (mm) | 140 |
Length (cm) | 145 |