But fear not - there is plenty to explore...
Shop all Arbor Shop sale ArborMEMBERSHIP
Earn up to 10% back in rewards. Learn more. Join Free.
LOWEST PRICE GUARANTEE
Find a better price? We’ll beat it by 5%. See our Price Match Policy.
Celebrating rider Mark Carter, the Arbor Carter Camber Splitboard is freeride focused and loves to tackle tough backcountry lines in any conditions. Born in the peaks of the Tetons, it's cambered for uphill support and tapered for improved float in varied terrain. Constructed with a wide platform, Arbor recommends sizing down 3-5cm because this puppy has a huge surface area. Enjoy steep couloirs and get after it on the Arbor Carter Camber Splitboard.
System Camber – If you want a highly responsive ride, crisp on-edge performance, and more pop for carving and ollies - all with smoother camber performance - then System Camber shapes are for you. The camber progressively reduces toward the tip and tail, making the leading edge less aggressive for cleaner on-snow performance.
Flex Rating – 4 (1 Soft - 10 Stiff)
Arbor Suggests You Downsize 3-5cm from Your Preferred Board Length – Wider Waist = More Surface Area
Grip-Tech – A tri-radial sidecut design that is not "blended." Natural shaping intersections, that in the past were eliminated, have been transformed into heel and toe contact points that provide a direct, more ergonomic way to grip the snow when additional control is needed.
Highland Split Core – The highly versatile Highland Core, constructed with a 1:2 blend of poplar and paulownia, with additional insert and centerline components for a premium factory splitboard.
Biax Glassing – A biax over biax lay–up that’s designed for park and street inspired all-mountain riding. Also creates a good platform for learning.
360° Fully Wrapped Sidewalls – Eliminates the need for tip fill, while effectively tying the whole snowboard together. A technology that delivers incredibly tight tolerances for improved board life and durability.
Recycled Steel Edges – Highly durable, recycled steel edges embody Arbor's key values: quality and sustainability.
Factory Tuned – Arbor detunes the tip and tail contact points on all of their snowboards for a catch-free ride before they leave the factory.
Bio-Plastic Topsheet – One of the materials Arbor uses in their quest to eliminate harmful petroleum based plastics from their production cycle. Made from Castor Bean Oil, this eco-topsheet is extremely durable and water repellent.
Art by Jesse Mudgett
Karakoram UltraClip – Karakoram’s premium splitboard clip is powerful, easier to use, and lighter. Once joined, the UltraClip fully constrains the seam of your splitboard to eliminate seam rattling, seam shearing, and seam rolling. The lever locks in the touring position as well to eliminate unwanted movement on the ascent.
Wend Natural Wax – All Arbor snowboards hit the shop floor ready to ride with Wend Natural Wax.
Bio Resin – Bio-Resin is a replacement for traditional petroleum based resin that doesn't affect performance or usability. The ingredients that go into it are sourced as co-products or waste products of other industrial processes and are manufactured employing green chemistry techniques that reduce the carbon footprint of the material by up to 40% when compared to its petroleum based equivalent.
Sustainable Wood Materials
Leaving It Better
Universal Splitboard Insert Packs
Size | 155 | 158 | 161 |
---|---|---|---|
Effective Edge (mm) | 1135 | 1162 | 1189 |
Tip Width (mm) | 306.3 | 209 | 311.6 |
Waist Width (mm) | 264.5 | 266 | 267.5 |
Tail Width (mm) | 298.4 | 301 | 303.6 |
Sidecut Radius (m) | 8.8 / 7.9 / 8.8 | 8.95 / 8.05 / 8.95 | 9.1 / 8.2 / 9.1 |
Stance Setback (mm) | 20 | 20 | 20 |
Stance Range (in) | 21.3 | 21.3 | 21.3 |
Stance Range (mm) | 540 | 540 | 540 |
Rider Weight (lbs) | 124 - 204 | 128 - 208 | 132 - 212+ |
Width | Regular | Regular | Regular |
When it comes to splitboarding, the weak link is usually your bindings. That all ends with the Union Charger Splitboard Bindings. Engineered with an innovative dual lock system similar to the toepiece found on tech ski bindings, this pinless design allows for faster, easier transitions from the skin track to the downhill. If you're keen to spend more time shredding and less fumbling with your gear this season, these bindings are for you.
Charger Pinless Dual Lock System – With zero room for a pin a in the center of the disk, the Charger split disk connection is now stronger than ever. A small notch in the rear split disk allows for the Chargers easy to use lever to lock you into place.
Ride Mode – With zero room for a pin a in the center of the disk, the Charger split disk connection is now stronger than ever. A small notch in the rear split disk allows for the Chargers easy to use lever to lock you into place.
Flex Rating – 7/10
SP3 Duraflex CB – This carbon-injected base is stiff and distributes 100% of the energy from edge to edge.
Extruded 3D Aluminum Heelcup with Astro Washer
Exoframe 5.0 Ankle Strap – Rapid response, trusted by professional snowboarders.
TS 4.0 Toe Strap with Pin – Multi-positional options and thermoplastic anti-slip material keeps you locked in and on point.
Tool-Less Adjustability
Magnesium S1 with Aluminum Base
Grade 8.8 Steel Hardware
EXP3 Duraflex ST
Fits Standard Splitboard (Voile) Insert Pattern
In the Box – Mounting hardware, Charger split disk w/ magnesium adapter plates, quiver disk w/ magnesium adapter plates, touring brackets, and splitboard strap.
Non-Stick EVA Disk Cover
Integrated Climbing Bar
The Arbor Satori Splitboard Skins (previously known as the "Angusta Climbing Skins") let you take the thinking out of choosing skins. Made to fit Bryan Iguchi's new Satori Splitboards, these Mohair and Nylon blend skins are ready to go right out of the box. You can bet they've got grip, glide, and won't get soggy even in Cascade Concrete. NOTE: This product was originally called Angusta Climbing Skins, but Arbor updated the name to match the splitboard model they're compatible with.
Mohair and Nylon Blend
Glue-free Adhesive
Universal Bail and Butterfly Clip
Waterproof Backing
Made in Collaboration with Kohla
Compatible with Arbor Satori AND/OR Carter Splitboards