CamRock – CamRock features a loaded camber section between the feet with a small flat section underfoot and rockered tips. The camber section maintains stability between the feet, while the flat areas underfoot let you load up ollies and the rockered tips offer forgiveness. This creates a very playful, easy turning board.

Flex Rating – 4 (1 Soft - 10 Stiff)

Twin

Progressive Sidecut – A progressive sidecut design blends many radii and smooth contact points for buttery smooth turn initiation, edge-to-edge transition and edge hold. It’s different for each model and matches the sidecut to the board’s specific camber profile.

Pop Woodcore – Built with poplar and bolstered with beech and spruce stringers. Beech hardwood strips are laid through the inserts from tip to tail for power transfer and a sturdy frame. The spruce from tip to tail just outside the inserts adds increased pop and precision.

Sweet Spot – Two carbon fiber stringers stretching outward from the inserts to the contact points in both the tip and the tail. Like prongs sticking outward these additives feel out rough terrain, promote pop, generate stronger edge hold and create a more playful ride.

Bi-Ax Fiberglass – Bi-ax Fiberglass is a two-way weave of fiberglass with strands running every 90-degrees. It’s more forgiving, easier to flex and highly versatile for all terrain types.

Tri-Ax Fiberglass – A three-way weave of fiberglass with strands running at 45-degree angles. It provides superior pop, consistent torsional flex, and more overall response.

CarbonBon – Pure carbon fiber slabs placed in a cross pattern under the inserts between the base and the core to enhance responsiveness, pop, torsional stiffness and amplify foot movement.

Sintered Base 7000 – This sintered base is fast, durable and requires less waxing. Slash believes in using the best possible materials and refrain from using cheaper, low-density extruded material our boards.

Belt Finish – The belt finish gets your base optimized before it's fully waxed.

Factory Wax – All Slash boards are factory waxed with OneBallJay wax and ready to shred straight out of the wrapper.

Steel – Built with 35% more steel content than the average, these are simply stronger and more durable.

Impact Dampening

2x6 Insert Pack

Overall Flex (1 Soft - 10 Stiff) – 6

Highback Flex (1 Soft - 10 Stiff) – 5

Baseplate Flex (1 Soft - 10 Stiff) – 5

Injected Nylon Baseplate

Extruded Aluminum Heelcup

Urethane Damping Pad

EVA Footbed

4x4 and The Channel Compatible Discs – All Fix Bindings are compatible with both 4x4 mounting patterns, and the Channel mounting system.

Nylon Highback

Highback Rotation – Rotate your highbacks for optimal lateral movement with Fix's simple to adjust system Lining up your highbacks to the heel edge of your board allows you legs a free range of motion.

Tool Free Forward Lean Adjuster

Stitched Ankle Strap – Fix memory gel straps are sewn by the best sewing facility in the world. They're so comfortable they're like sofas for your feet.

Injected Toe Strap – If lightweight performance is what you're after, then the Fix injected straps are what you need. They stretch as you tighten them which evenly distributes pressure, eliminating pressure points.

Tool Free Strap Adjustment

Ladder Saver Buckles

Cast Aluminum Buckles

Dethgrip Hardware – Let's face it, having to tighten your screws all the time is a hassle. That's why Fix use a special type of mounting hardware called Dethgrip™, to ensure that you're not looking for a screwdriver every time you go riding.

Lightweight Construction – Nylon injection, extruded aluminum heelcups, cast aluminum buckles, and injected straps all lead to one of the lightest bindings around.

Regrind Free Injection Moulding – No filler material = stronger bindings and less breakage