Alpine V3 Camber – The Alpine V3 profile has a deeper traditional camber that zeroes out before the end of the sidecut. The small zero camber sections provide a more controlled ride while retaining the response and power of a throwback cambered board.

Directional Flex

Flex Rating – 6 (1 Soft - 10 Stiff)

Directional Shape

Progressive Sidecut – This sidecut consists of two or more radii blended together to accommodate the three stages of a turn. It provides easy turn initiation while offering greater control throughout the turn and maximum power while exiting.

0.8" Setback

Panda Hover Core – This ultra lightweight core is made from paulownia and poplar wood, and is enhanced with bamboo Power Rods™ for maximum power and response.

Holysheet™ Tri/Bi Fiberglass – The HOLYSHEET™ fiberglass configuration features fiber weaves with a high tensile strength and low modulus of elasticity. With a higher roving count in the same weight of glass, you can have a stronger and more responsive board without adding extra weight. It features Triaxial fiberglass on top of the core and Biaxial fiberglass beneath, creating a perfectly blended ride while increasing strength and durability.

Magic Bean Resin – This advanced resin system has a bio-content of 60% renewable, agricultural raw material and is produced with no waste or greenhouse emissions. In production, it has a low-temperature requirement with a high yield output. Poppy, powerful, and extremely durable, MAGIC BEAN™ resin yields much stronger and more rigid qualities allowing a decrease in the wood core thickness. This means you get a lighter board while achieving higher energy return.

CarbonFlax Amplifiers™

Full ABS1000 Sidewalls

Hyperdrive™ ADV XT Die Cut Base

360˚ HRC48 Steel Edges

Multitech™ Level 4 DeepSpace™ PAM16000 Silkscreen – The DeepSpace™ Design Theory takes advantage of the thickness of a transparent topsheet. Strategically layering ink on multiple levels from the top and the bottom imbues graphics with a sense of life through depth.

Stainless Steel 2 x 4 Inserts

Flex Rating – 7 (1 Soft - 10 Stiff)

Stage 9 | Duraflex ST – Built with a purpose. The Stage 9 Duraflex ST Baseplate offers Union’s highest levels of strength and energy transmission to date. Backed by Union’s lifetime warranty guarantee.

Molecular Bushing System – Union’s all new Molecular Bushing Suspension System acts as an additional layer of dampening and shock absorption between you and your snowboard.

Stage 9 Baseplate Gasket – The final layer of the of the Stage 9 base. The baseplate Gasket holds the molecular bushing in place, and adds another layer of dampening and vibration cancelling.

Extruded 3D Aluminum Heelcups – Designed for optimum heel hold and minimization of drag, Union 3D Extruded Aluminum heelcups are the strongest in the business.

Canted Footbeds

Stage 19 | Duraflex ST – Layered highback construction allows riders to achieve stronger edge to edge response while still maintaining tortional flexibility for a comfortable ride.

Non-Stick HP EVA – The next evolution of Union’s non-stick EVA technology. Non-Stick Hot Press EVA creates a closed cell finish that’s 100% waterproof. Gone are the days of snow and ice build up on your bindings

Tool-less FLAD

ExoFrame 6.0 Ankle Strap – Padded comfort meets response. The all-new Exoframe 6.0 Ankle Strap features Union's new Molecular Ankle Strap Padding all the way over the edge of the plastic Exoframe strap body. This new design helps to minimize foot and ankle fatigue by reducing pressure points.

TS 5.0 Toe Strap – The TS 5.0 Toe Strap easily shapes to any snowboard boot and offers maximum grip from all angles.

Magnesium S2 with Steel Base – Union's proven bombproof ratchet system, Magnesium buckles are light, sleek, and durable on the mountain.

Grade 8.8 Steel Hardware – The strongest steel available on the market, Union's use of Grade 8.8 represents a commitment to delivering the strongest and most reliable bindings on the market today.

Camber Disk – 2x4, 4x4, and Channel compatible.

Flex Rating – 7 (1 Soft - 10 Stiff)

1:1 Lasting – True half sizes.

3D Molded Tongue – For easier lacing and an even flex throughout.

Performance Backstay – Enhanced spine support.

Heel Hold Kit – Customizable inserts for perfect heel hold.

Performance Liner – Heat moldable, dual density Intuition foam.

Performance Internal Harness – Built taller for additional support, flexibility, and heel hold.

Articulated Cuff – Eliminates shell distortion.

Traditional Lacing

Performance Footbed – Molded Evolution foam with heel cradle, arch support and heel cushioning.

Performance Rubber Outsole – Enhanced grip.

STI Energy Foam – High-rebound cushioning.

Overmold – Fused overlay.