CamRock 1-4-2 – The response of camber with the floatability of rocker. Camber between your feet acts as a spring, keeping your contact points on the ground as you go in and out of turns and allowing you to keep that edge hold longer. Once compressed the camber will accentuate the rocker and lift the nose out more, allowing it to float.

Flex Rating – 7 (1 Soft - 10 Stiff)

Directional

Tapered Underbite – More floatation and total edge control. Similar looking to “wings” or channels on a surfboard, it functions a little different on snow. Each side of the board’s effective edge is segmented into 3 distinct parts that step horizon - tally inward rather than tapering. Traditional “tapered boards” take the full sidecut and pull the tail inward, which is away from the arc of your turn – this is why they tend to wash out under hard car - ving. Tapered UnderBite corrects this by increasing the sidecut depth as you move towards the tail creating a corrective “hook” to the taper. The board blends into turns effortlessly, and has the directional drive and float you’d expect from a tapered board.

Full Poplar – Yes.'s baseline core for tip-to-tail woodcore snowboard construction. A core that strikes a predictable balance between durability and consistent flex and lightweight feel.

Sintered True

Art by Mark Kowalchuk @mark_kowalchuk

2 x 4 Inserts

Flex Rating – 6 - 7 (1 Soft - 10 Stiff)

Flushcup Technology – Designed to hold boots even without a highback, these have a flush inner surface where the highback meets the heelcup. This gives direct energy transfer between boot and binding.

Hanger 3.0 Nylon Reinforced with 30% Glass Fiber – The new Hanger H3 features a wider bushing footprint that is closer to the board’s edges for enhanced board connection and faster energy transfer. The H3 also encompasses a reduction in weight, a dropped-down inner lateral wall for better ankle mobility, and is able to accommodate bigger volume boots. To top it off, it also has a new kingpin tool-less 2.0 that is more integrated and user friendly.

Canted 2.0 Footpillow

Post – Nylon with 50% Carbon Fiber

Freestyle Highback – Symmetrical geometry, minimal top curve for extra mobility, hidden flex hinge at the top 1/3, and Top Flair, which dampens chatter and eliminates calf-bite

Hyperfuse II Strap – The HYPERFUSE II strap is an evolution and a design refinement over the original. Inspired by shoe construction, the HYPERFUSE II is a stitch-less, spineless strap. Its inner guts are constructed with nylon webbing that is strong, durable and flexible, and sandwiched between two layers of EVA.

3D Pro-Grip Toe Strap – Non-slip and grip is what you have with the 3D Pro-Grip Toe Strap. Ultra grippy, moldable, and can be used on the tip or toe of your boot.

Tool-less Adjuster Straps

Ankle Hinge Connector – A minimalist but strong hinge design allows your straps to move out of the way, with a stop mechanism to prevent them flopping around.

Toe Hinge Connector

Nylon with Glass Fiber Buckle Levers

Skate Tech – Inspired by how easily and efficiently a skateboard turns, Skate Tech mimics the function of skateboard trucks. Traditional bindings diminish energy transfer by flexing and bending the baseplate, forcing you to crank straps down harder, ride with more forward lean, or run taller and stiffer highbacks. Skate Tech bindings bypass the middle of the snowboard and direct your energy right onto the board's edges, transfering more power to the board with less work.

Bushings – Comes with Medium (45 shore), and Hard (55 shore) Bushings

Combo Mounting Disc 4x4 - Channel – Mounting disc is Nylon reinforced. 4x4 and Channel compatibility. Minimal board fixture. Light and strong