Directional Twin CamRock – The response of camber with the floatability of rocker. Camber between your feet acts as a spring, keeping your contact points on the ground as you go in and out of turns and allowing you to keep that edge hold longer. Once compressed the camber will accentuate the rocker and lift the nose out more, allowing it to float.

Flex Rating – 6 (1 Soft - 10 Stiff)

UnderBite – UnderBite edges re-distribute a rider’s weight in such a way that it enhances turning ease and edge hold. Creating divots inward at the binding area reduces and disrupts the surface area of the edge that has contact with the snow while the board is turning. This segmentation of the sidecut into 3 key zones focuses your body weight onto areas that initiate, hold and release turns.

Full Poplar – Yes.'s baseline core for tip-to-tail woodcore snowboard construction. A core that strikes a predictable balance between durability and consistent flex and lightweight feel.

Biaxial Glass

Sintered Spec – The raw material is pre-consumer recycled (meaning it never left the factory) sintered base material. The heating and extrusion process softens it slightly, but it's still much harder than true Extruded.

Art by Natasza Zurek

2 x 4 Inserts

Flex Rating – 5 (1 Soft - 10 Stiff)

Hanger 2.0 is Nylon with 30% Glass Fiber – I-Beam wall sections are both rigid and light. Baseless design allows for uninterpreted board flex. Transfers energy to the board’s edges

Flushcup Technology – Designed to hold boots even without a highback, these have a flush inner surface where the highback meets the heelcup. This gives direct energy transfer between boot and binding.

Post – Nylon with 50% Glass Fiber

Highcup Technology

FM 2.0 Highback – Minimalist design, symmetrical geometry, Top Flair, which dampens chatter and eliminates calf-bite

Ankle Hinge Connector – A minimalist but strong hinge design allows your straps to move out of the way, with a stop mechanism to prevent them flopping around.

3D Stretch-Fit Toe Strap – Sometimes what works best is a simple, streamlined, minimalist design. A 3D strap with Stretch-fit technology allows for better toe cap fit.

Tool-less Adjuster Straps

Toe Hinge Connector

Skate Tech – Inspired by how easily and efficiently a skateboard turns, Skate Tech mimics the function of skateboard trucks. Traditional bindings diminish energy transfer by flexing and bending the baseplate, forcing you to crank straps down harder, ride with more forward lean, or run taller and stiffer highbacks. Skate Tech bindings bypass the middle of the snowboard and direct your energy right onto the board's edges, transfering more power to the board with less work.

Combo Mounting Disc 4x4 - Channel – Mounting disc is Nylon reinforced. 4x4 and Channel compatibility. Minimal board fixture. Light and strong

Highcup Compatibility – Compatible with all YES hangers. Low profile for extra flexibility. Street, park and pow.

Bushings – Available in Soft (40 Shore)