Dynamic Camber – Aggressive tip-to-tail camber creates a more poppy ride: ollies go bigger, edge changes go faster and the board is spring loaded to help absorb landings. Combined with 3D shaping, it is less likely to hook up than equivalent cambers from other manufacturers.

Flex Rating: 8 – (1 Soft, 10 Stiff)

3D Technology – This board has 3D technology in the nose and tail. The lifted sidebase areas hug the terrain when you crank a turn or jam into a transition, and help you plough through the pow like a speedboat. You’re also way less likely to catch an edge if you sketch out on your landing.

SideKick™ – SideKick™ increases the sidebase uplift at the widest points of the nose and tail. This makes turn initiation even smoother, enhances float in powder and improves board handling in rough terrain. It has to be ridden to be believed!

Light Core – A blend of poplar and paulownia light-wood offers the best strength to weight ratio.

Tri Ax Laminate – This three-way weave of fiberglass is light, strong and responsive and is used to beef up the flex pattern.

Flex Walls – Urethane infused Flex Walls. The added urethane helps dampen vibrations.

Ultra Glide S Base – Maximum molecular content for a hardened sintered base that hauls ass. More molecules mean a denser base that can take a beating using ISO-Sport 7000 series as backbone.

2 x 4 Inserts

Flex Rating – 5 (1 Soft - 10 Stiff)

Solid Base – Lobster's flagship base is unique in snowboarding, seamlessly combining aluminum with the highest grade nylon composite. It’s stronger, lighter, fully adjustable and tool free. The minimized footprint aids board flex and offers unparalleled fit regardless of boot brand and size.

Overmold Base Construction – No other binding in snowboarding is build this way. Lobster unique overmold construction marries super strong extruded aluminium with the forgiving flex of nylon glass fibre. Here is a bas that is as strong as it is comfortable. Never break a heelcup again!

Rubber Impact Pads – The corner points of any binding is usually where the most pressure builds up especially with high impact landings. This can be so intense that it can possible snap your board on those tail heavy landings. Because Lobster bless these corners with high density rubbers you have much less chance of snapping your favourite board.

Boot to Board EVA Heelpad – Lobster have eliminated all hard parts from under your heels. The heelpad in this binding is a full EVA cushion pad giving you the most protection possible. Nobody likes a heelbruise so nothing but high impact foam between your boot and board.

Mini Disk – The reduced size of the minidisk decreases the ‘deadzone’ in your board’s flex pattern allow for a binding that flexes more naturally with the board for a perfect connection and power transfer.

Tweaker Highback – The flat, asymmetrical shape delivers rapid heel-to-toe control while allowing plenty of lateral movement to lean into your presses and bone out those grabs. EVA padding helps soak up heavy landings.

Clean Forward Lean – Lobster's design completely eliminate the ‘forward lean block’ most brand use. Making for a cleaner Forward lean geometry with no gap between the highjack and heel cup.

No Back Ready – Did you know that Halldor’s preferred set up for riding park is without highbacks? Lobster bindings make it easy to experiment with no back riding since they pop out in seconds because of the tool-less construction. If you havent tried riding without highbacks you should now!

Ready2Tweak – Eiki’s preferred Higback shape has a flat geometry making it easy to tweak sideways while maintaining direct pressure to the heel side.

Strap-On Straps – Pre-curved for rapid entry, with a lightweight mesh that wraps snugly around your boot providing comfortable response and maximum tweakability.

Eazy Access – The pre curved ladders make your straps naturally fall open and to the side so they are not in the way when you want to get your boot in there. Your friends will never have to wait on you to strap in any longer!

Adjustable Geometry – With multiple attachment positions on both ladders you can customise the geometry of your binding perfectly. Go for a higher heel strap placement for a more solid ride with your boot being held more backwards into the heelcup. Or place the straps lower for a more downward directed force into the base for a looser skate-like feel

Speed Grip – Ratchets come with four rows of grippy teeth that allow for super fast strap closure. No patience for slow ratchets.

Flex Fit – Lobster Heel straps are designed to fit perfectly around any kind of snowboard boot shape. When the straps are tensioned pressure is spread across the entire surface of the heelstrap reducing pressure points.

Toolless – The only tool you even need is the screw driver to attach these bindings to your board. Otherwise everything on this binding can be adjusted without a tool. No hardware also means saving weight.