Directional Camber – A blend of rocker and camber in the nose combines float and control while camber under the back foot drives with power and stability.

Personality – 5 - 8 (1 Soft - 10 Stiff)

Twin Flex – The flex is perfectly symmetrical from tip to tail for a balanced ride that's equally versatile regular or switch.

Directional – The classic snowboard shape, designed to be ridden with a slightly longer nose than tail to concentrate pop in the tail while still giving you plenty of float, flow, and control to rip any terrain or condition.

Balanced Freeride Geometry – Balanced Freeride Geometry spec setback camber and a sidecut that is centered on your stance to create a twin freestyle feel when riding flat base. On edge it turns tight and quick with the float and prowess expected from a directional deck.

Pro-Tip – A tapered tip and tail thickness reduces swing weight for easier mobility.

12mm Taper

Super Fly II™ 700G Core – Stronger and lighter woods target specific areas of the core to provide pop, strength, and reduced weight.

45˚ Carbon Highlights – Carbon Highlights optimizes each layer of the fiberglass matrix and adds a full tip-to-tail carbon layer to reduce weight and fine tune torsional feel to achieve different ride characteristics. A 60° fiber angle creates a highly maneuverable and playful feel, while a 45° fiber angle provides a more aggressive ride.

Recycled Sintered WFO – Infusing a specially formulated wax deep into the pores of this extra-absorbent, high-density sintered material results in an ultra-durable base that stays wide open all season and in any condition.

The Family Tree Collection – Based on existing shapes, but tweaked to make them even better for your ultimate day of riding, the Family Tree boards come in a range of gender-neutral sizes and shapes built for all types of riders. Designed for powder, but capable of conquering any terrain, these deep-seeded shapes shine from the resort to the backcountry.

Infinite Ride™ – This Burton-exclusive technology allows maximized pop and strength by overbuilding the board, then putting it in a machine that breaks in the board for you. Whether you choose to ride Flat Top, Flying V™, or Camber, rest assured that with Infinite Ride™ your board will maintain its flex, pop, and feel from the first day forward, season after season.

Super Sap® Epoxy – A resin formulated with bio-based materials that reduces the carbon footprint by 50% over conventional all-petroleum-based epoxies. Less oil consumption means even less of a carbon footprint per board.

The Channel® Mounting System – Stronger, faster, easier, and more adjustable -- The Channel™ gives you ultimate control of your stance and your board in a design compatible with all major bindings (not just Burton's).

Channel Inserts Included – Channel Inserts are required to mount your bindings. Inspect packaging before disposing.

Medium-Stiff Flex – Helps with quick, technical maneuvers, even at high speeds. Great for all-mountain carving, powerful freeriding and charging through the terrain park.

Re:Flex™ Binding System – Offers more flex, feel, and cushioning than traditional disc bindings, in a package that's universally compatible with all current mounting systems, including 4x4, 3D® (via Burton Rider Service, sold separately), and the Channel®. The minimized, cored base-plate with Living Hinge™ disc reduces the weight and footprint of the binding, while also bending freely for a more natural flex.

Single Component 45% Short-Glass / Nylon Composite Baseplate – One material throughout creates consistent response and feel for all‑terrain domination. Carbon performance without killing your credit card.

Re:Flex™ FullBED Cushioning System – Offers full underfoot cushioning that maximizes comfort while minimizing fatigue. Anchored to the baseplate, the stealth trap door design makes it easy to access the mounting hardware.

B3 Gel – The same cushioning found in Burton's high-end boots for ultimate dampening that's formulated to withstand repeated impacts without breaking down or hardening up in cold temps.

Single Component Construction – The simplicity of a one-piece hi-back means immediate response. Using Burton's book of material secrets, they can manipulate the overall flex profile -- from buttery to responsive.

Zero-Lean Canted Hi-Back Design – Your legs don't go straight up, and neither should your hi-backs. This ergonomic design follows the natural contours of your left and right legs to maximize control and comfort. Riders who prefer a more playful and relaxed feel will dig the Zero Forward Lean design on select hi‑backs. As always, you can still choose to crank ‘em forward for quicker control when carving or climbing icy pipe walls.

Heel Hammock – A reinforced rubbery material wraps response around the heel of any boot. Run your straps a little looser and still get lightening fast response out of turns with your heel cradled in complete suspension.

DialFLAD™ – The higher the Forward Lean angle on your hi-backs, the quicker your heel-edge turns. Crank ’em forward for icy hits in the pipe, or back ’em off for jibbing.

Hammockstrap™ 2.0 – Everything Burton's team riders love about the Hammockstrap, but paired with Smooth Glide™ buckles for a reduced profile and more comfortable fit.

Supergrip Capstrap™ 2.0 – Minimalist design merges two materials into one technologically advanced toe strap. A firmer material in the spine provides a supportive and lightweight skeleton, while a softer over-molded material improves boot wrap and comfort. Featuring Ultra-minimized and fully injected with an over-molded design. Made ultra-durable, glue-less, stitch-less and PU-free construction. 3D curved with a triple axis spine as well as a true wrap toe window.

Flex Slider – Makes strapping-in a breeze with a strategically stretched hinging zone that allows the heel strap to flex and fall fully open. Thanks to science of forced molecular alignment, the Flex Slider is also incredibly strong.

Smooth Glide™ Buckles – Lightweight aluminum and polycarbonate levers give you season after season of buttery smooth and reliable ratcheting power.

Compatible with All Major Mounting Systems – Please note, the 3D Hinge Disc is required for mounting on 3D systems (not included).

Re-Ground Materials to Reduce Waste