Early Rise Nose with Flat Camber

Flex Rating – 5 (1 Soft - 10 Stiff)

Fishtail

26mm Taper

Sport Core – Lightweight Poplar with carbon inlays

Full Length Unidirectional Carbon

Carbon Binding Reinforcement – Added layer of carbon weave placed at binding impact zones for added strength and durability.

Triax Fiberglass – Glass strands are woven together at +45˚, 0˚ and -45˚ for added torsional rigidity without extra weight.

Bio Resin – This board uses an environmentally-conscious, bio-based resin that has 35% of its molecular range derived from plant material. It has the same structural properties as resin derived solely from petrochemical products.

Sintered 2100 Base

High Gloss Topsheet

2 x 4 Insert Pattern

Flex Rating – 6 (1 Soft - 10 Stiff)

Stage 11 | Asym Duraflex ST – Asymmetrical Baseplate For Increased Torsional Board Flex. All-new Astro Washer Prevents Heelcup Slipping. Made with Duraflex ST Nylon

Molecular Bushing – Increased cushioning for hard landings, 15% lighter than Union Fused Vaporlite, and made to minimize foot fatigue. This is one vibration dampening baseplate!

TPE Outsole – This new binding manufacturing process is ice and snow resistant and requires zero bushing glue.

Stage 15 | Ultra Duraflex ST – New from Union, this molecular highback has a bushing For increased freestyle flex and comes preloaded for quick edge to edge power. Made of Duraflex ST Nylon

Forma X Ankle Strap – Exoframe exterior for instant response, padded interior for all day long foot comfort. Exoframe connector acts as a suspension system for your boots.

TS 5.0 Ultragrip Toe Strap

Magnesium S1 with Steel Base – Union's proven bombproof ratchet system, Magnesium buckles are light, sleek, and durable on the mountain.

Mini Disk – Compatible with 2x4 and The Channel™

Grade 8.8 Steel Hardware – The strongest steel available on the market, Union's use of Grade 8.8 represents a commitment to delivering the strongest and most reliable bindings on the market today.

Extruded 3D Aluminum Heel Cup with Astro Washer

Flex Rating – 5 - 9 (1 Soft - 10 Stiff)

Vans Flex Control System – Removable high-rebound Hytrel® tongue stiffeners allow riders to custom-tune their flex. Slide them both in for maximum support, use just one to provide either increased lateral or medial response or leave them out for a softer-flexing boot. As boots soften up over the course of a season, you can add the tongue stiffeners back in to extend the life of your boots.

Instep Flex Zone – The Instep Flex Zone functions to maintain natural ankle flexion in your boot, whether in or out of your bindings.

Asymmetrical Flex Zone

Powercuff Strap – Providing extra support at the top of the boot for increased stability and response. Its configuration gives riders customizable levels of engagement and the option of wrapping the strap around the internal liner or the exterior tongue.

Pleasurecuff – The supple elasticity of the PleasureCuff delivers a cushioned, comfortable fit that keeps your calves supported.

V3 Ultracush with TNF FlashDry Liner – The most advanced liner ever from Vans, this inner features The North Face's FlashDry fabric, which transfers and eliminates moisture. An UltraCush layer provides all-day comfort with minimal seams, and a neoprene forefoot gives a natural flex. A dual-density heat-moldable core is bolstered by the latest X-Cage--extra security and heel hold that keeps you in contact with your board at all times.

V3 Boot Harness – This advanced support harness delivers the highest level of support to the ankle and instep, keeping the V3 liner and boot shell locked in and connected.

Vans Hybrid Plus Boa – The Hybrid system merges traditional lacing with the power of Boa closure at the instep. The Hybrid Plus system expands the range of flex control by adding an extra Boa pass around the back of the boot and across the instep to optimize the lines of pull and maximize flex control.

Vans Custom Slide Guide – Anatomical shape provides adjustable fit anywhere along the instep area for added comfort and unrivaled heel hold.

V3 POPCUSH Footbed – A triple density footbed that combines impact cushioning with energy transfer, the V3 POPCUSH fights fatigue with anatomical shaping, arch support, a moisture-wicking topsheet and OrthoLite® open-cell top foam.

V3 Superenduro Waffle Outsole with All-Trac™ Rubber – Inspired by the extended cross- country and off-road demands of moto enduro racing, the V3 SuperEnduro outsole is designed to offer maximum performance in and out of your bindings. Multi-directional tread design? Surface-level texturing? A TPU toe pick? Check, check, and check. There’s no keeping up with this all-terrain apex predator.

Waterproof Breathable Valves – Moisture management through waterproof valves ensures breathability--meaning dry socks, dry feet, and a more comfortable and longer ride.

Heat Retention 360º – All Vans snowboard boots feature a newly improved thermal retention layer that provides a 360° wrap of the toe box and between the outsole and the liner. This essential layer keeps heat in and cold out, ensuring all-day warmth and comfort.