Backseat Camber – Camber loaded under the back foot for precision and control, with flat segments under the front foot for superior floatation in deep snow. The best of both worlds!

Flex Rating – 4 (1 Soft - 5 Stiff)

Tapered Directional – Tail width is slightly tapered (2-20mm). This loosens up turning initiation and improves floatation in deeper snow without sacrificing edge hold on hardpack.

Quadratic Sidecut – Quadratic sidecuts use 3 or more radii instead of a continuous radial sidecut. The radii of the sidecut is shallower at the ends and deeper in the middle, which promotes easier turn initiation.

Aspen SLCT Core – Every single wood strip is hand selected to ensure unparalleled core quality and lightness.

Popster – Popster's shaped core profile is strategically milled inside of the insert packs, allowing the board to flex more naturally underfoot and transfer energy into the nose and tail for added pop.

Biaxial Medium Density Fiberglass – Medium density European-made fiberglass layers guarantee a consistent quality level, for light and lively boards.

C/FX Basalt – A patented combination of fiberglass and basalt designed to provide an optimal ratio of weight, power, and dampening.

Damplifier – Lightweight honey comb materials and cork combined and strategically placed in the tip and tail for better flotation, less inertia for easier steering, more control, and increased dampening and shock resistance.

Recycled ABS Sidewalls – The molecular structure of ABS can be described as a concrete bar with rubber nuggets inside, combining toughness for energy transfer and dampening properties for impact absorption.

50% Recycled Sintered Base – 50% recycled base materials! Reducing waste without sacrificing glide!

Fine Stone Finish – Fine stone finish helps speed up in powder or softer snow conditions.

All-Mountain Edge Bevel – A 1° edge holding tune throughout the key parts of the sidecut meets a 2° bevel between the feet. This delivers the most solid edge hold with no hang-ups.

Natural Wax

30% Bio-based Resin – High performance with low environmental impact, this bio-based resin is made with 30% of its molecular structure derived from plants.

2 x 4 Insert Pattern

Flex Rating – 4 (1 Soft - 5 Stiff)

ShadowFit Baseplate – 3-piece baseplate featuring a unique flexible heel loop and completely anatomical fit to provide intuitive mobility without sacrificing performance. The result is an ultra light binding that allows your whole kit to flex together.

Kevlar Quickwire – A Kevlar wire is anchored at the toes and triangulated around the heel cup, enhancing energy transmission and heel-to-toe response for quick edge to edge transitions.

45% Fiberglass Nylon Composite – All the benefits of polyamide material but 20% more responsive

Adjustable Toe Ramp – Super easy to handle adjustability for the best possible transmission on toe edge.

Integrated Mounting System – Integrated Mounting System (IMS) is Salomon’s patented trick for keeping your disc screws in place while adjusting your bindings or swapping out boards.

Power Hook – This direct link between Kevlar Quickwire and baseplate maximizes the transmission on heelside turns.

Universal Disc – Ultimate compatibility with all existing mounting systems on the market.

Unite Disc Compatbility – The baseplate is compatible with Salomon's UNITE rental system.

Supreme Full EVA

Minima 3D Highback – This unique 3D geometry high back is powered for controlled energy, long lasting power and precision. The next generation of binding performance is here.

12° Pre-rotated Shape

Shadow Lite Ankle Straps – Ultimate fit, precision and lightness for all terrain performance.

Locked-up Toe Strap – Ultimate envelopment for perfect boot hold. Ultra lightweight and durable.

Micro Max Strap Adjustments – Fast and precise micro adjustments let you optimize the straps centering on your boot for maximum comfort and support.

Aluminum Buckles – Providing the best of lightweight and quick and powerful cranking with a buttery release. Deep bite allowing a secure lock and smooth adjustment.

MP Ratchets – Highest performing and quality ratchet found on all Shadow Fit bindings. Better tightening, less ladder damage, more power and precision with each click.

Canted Footbeds – Instantly add pop power and extra edge control to your riding with 2.5° canted footbeds. Easy on the knees and no loss of board-feel.

Responsive Flex – The stiffest flex available, aimed at aggressive riders who need the maximum performance from their boot.

Precision Harness – An adjustable internal heel strap that locks down your liner for maximum support.

Custom Fit – Heat moldable multi-density foams strategically placed in the sensitive areas of the foot, shin, ankle, and heel.

Precision Liner for Precise, Articulated Fit

Boa® Lacing System – Easy and quick Boa® lacing - tightens with the flick of your wrist.

H4 / M3 Dual Zone Boa® Coiler – Two separate dials and lace paths work with the boot’s cuff to isolate fit into two distinct zones. The upper zone dials in flex and stability, the lower zone locks the forefoot.

TX3 Boa® Lace – The TX3 Boa® Lace is a flexible, low-friction textile lace adapted to many fit configurations.

Ortholite Eco Hybrid™ – OrthoLite® Hybrid™ is a patent pending formulation that uniquely blends 5% recycled rubber and 15% production waste foam for 20% eco-content for uncompromised performance with less impact on the planet.

Quickdry Insole – A Salomon exclusive feature that speeds up the drying process to keep your toes dry and comfortable.

Contagrip® Rubber – Salomon's patented non-marking, super durable outsole with strategic-placed high-density compounds in areas that are prone to wear. Lower-density compounds are placed throughout to offer more flexibility and grip.

MTN GOAT – MTN GOAT outsole provides long lasting durability and traction underfoot.