Christenson Surf Camber / Rocker – Uprise in the big floaty nose and at the tail end helps to keep you above the soft stuff with easy turn initiation. Camber in the middle provides the power and pop you need for responsive snowboarding.

Personality / Flex: 4 – (1 = Soft and Playful, 5 = Stiff and Aggressive)

Forever Flex – All Jones boards are broken in using specialized machinery that mimics extreme riding use to help stabilize the flex and rocker profile of a board for it's lifetime.

Directional Flex Pattern

Progressive Sidecut – At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

8.5mm Taper – The tapered shape sinks the tail in pow for better float and quicker turns.

Bamboo Surf Core – Re-designed triple density Bamboo Surf wood core that features primarily paulownia stringers with bamboo stringers positioned in the pocket of the sidecut for better edge response and turn power.

V-Core – Boards with V-Cores are slightly softer in the very center of the board for improved maneuverability and stiffer through the tip and tail for stability and pop.

Power Sustainable Basalt Stringers – Sustainable stringers made with 100% natural fibers. Basalt stringers improve torsional response and transfer power from under your feet to the tips of the board to help eliminate nose and tail chatter.

Biax Fiberglass – A dual-direction, dual-layer, stitched fiberglass laminate that provides a fun, forgiving and snappy ride.

Recycled ABS – ABS plastic is one of the necessary evils of snowboard production. Jones improves the sustainability of their snowboards by using only recycled plastic.

Sintered 8000 Base – New super durable material made from Ultra High Molecular Weight polyethylene and carbon.

Oversized Recycled Edges – All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.

Traction Tech 3.5 – Traction Tech 3.5 features three bumps per edge (front binding, board center, back binding). The middle bump is slightly bigger than the outside bumps for better grip.

ECO-Plastic Topsheet – Bio-plastic topsheet made from Castor beans. This eco-material is ultralight, chip/scratch resistant and water/snow repellent (snow sticks less to topsheet).

Bio Resin – All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy. The raw materials used to make Super Sap Bio-Resin are co-products or waste products of other plant-based industrial processes. Producing Super Sap requires 33% less greenhouse gas emissions than conventional epoxy.

Factory Tuned – All Jones snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Wend Natural Wax – Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

2 x 4 Insert Pattern

Carve Pack Inserts – Allows a more centered stance option for riding firm snow.

Personality / Flex: Friendly & Playful – 2 / 5 (1 = Soft and Forgiving, 5 = Stiff and Lively)

Comfort Foam Foot Pillow – Full length EVA foam footbed that maximizes binding comfort while minimizing foot fatigue. The 3D molded footbed surface offers supreme traction for any boot tread pattern and prevents snow build-up.

Hanger 2.0 – Binding hanger design featuring a wider bushing footprint that’s closer to the edges for enhanced board connection and faster energy transfer.

Flushcup Technology

3˚ Canted Foot Pillow

Dynamic Flex Highback – Mid-wide profile and friendly, ergonomic flex helps you turn, tweak and slash.

Asym Highback with Wider Lateral Side for Added Toe Side Turn Power

Stiff Middle Spine for Solid Carving Performance

Flexible Side Edges for Added Freestyle Performance

Tool-Less Forward Lean Adjustment

Highback Flex – 6 (1 Soft - 10 Stiff)

Flip-It Ankle Strap Technology – Side 1: Freeride mode / Side 2: Surf mode

3D Flex Fit 2.5 Toe Straps – 3D Flex Fit 2.5 toe straps stretch for ultimate fit and comfort

Tool-Less Strap Adjustment

Hinge Connector Strap Attachment + Pre-Curved Ladders

Bombproof Buckles – Bombproof buckles made from aircraft-grade alloy featuring ultra-strong levers and springs. Triple action ratchet design increase speed of entry and release.

Freeride Mode – Position the wide half of the strap above the buckle for more lateral support and board response. Use Hard Bushings for maximum response.

Surf Mode – Position the wide half of the strap below the buckle for solid heel support but more ankle flexibility for getting loose. Use Soft Bushings for a looser, more dynamic surf feel.

Included Bushings – Hard - All Mountain / Freeride Mode (Surf Mode bushings available separately)

Skate Tech – The components of the SkateTech design mimic the function of a skateboard truck. The “Hanger” acts as a lever that transfers energy input from the straps to the “Bushings” and onto the board edges. The “Kingpin” acts as the fulcrum for the “Hanger” and magnifies the energy transfer through leverage. Traditional bindings lose energy when the baseplate flexes and bends unevenly. The energy loss forces you to crank your straps tighter and ride with more forward lean to gain the same control. Uneven pressure and tight straps lead to more foot fatigue and pain. By evenly pivoting over the “Post”, the middle of your board flexes more uniformly and your energy inputs are focused directly on your edge. Your feet stay more relaxed and more comfortable because the bindings transfer power to the board with less work.

Universal Mounting Disc – Compatible with 4x2, 4x4 and EST/Channel

Flex Rating – 5 - 9 (1 Soft - 10 Stiff)

Vans Flex Control System – Removable high-rebound Hytrel® tongue stiffeners allow riders to custom-tune their flex. Slide them both in for maximum support, use just one to provide either increased lateral or medial response or leave them out for a softer-flexing boot. As boots soften up over the course of a season, you can add the tongue stiffeners back in to extend the life of your boots.

Instep Flex Zone – The Instep Flex Zone functions to maintain natural ankle flexion in your boot, whether in or out of your bindings.

Asymmetrical Flex Zone

Powercuff Strap – Providing extra support at the top of the boot for increased stability and response. Its configuration gives riders customizable levels of engagement and the option of wrapping the strap around the internal liner or the exterior tongue.

Pleasurecuff – The supple elasticity of the PleasureCuff delivers a cushioned, comfortable fit that keeps your calves supported.

V3 Ultracush with TNF FlashDry Liner – The most advanced liner ever from Vans, this inner features The North Face's FlashDry fabric, which transfers and eliminates moisture. An UltraCush layer provides all-day comfort with minimal seams, and a neoprene forefoot gives a natural flex. A dual-density heat-moldable core is bolstered by the latest X-Cage--extra security and heel hold that keeps you in contact with your board at all times.

V3 Boot Harness – This advanced support harness delivers the highest level of support to the ankle and instep, keeping the V3 liner and boot shell locked in and connected.

Vans Hybrid Plus Boa – The Hybrid system merges traditional lacing with the power of Boa closure at the instep. The Hybrid Plus system expands the range of flex control by adding an extra Boa pass around the back of the boot and across the instep to optimize the lines of pull and maximize flex control.

Vans Custom Slide Guide – Anatomical shape provides adjustable fit anywhere along the instep area for added comfort and unrivaled heel hold.

V3 POPCUSH Footbed – A triple density footbed that combines impact cushioning with energy transfer, the V3 POPCUSH fights fatigue with anatomical shaping, arch support, a moisture-wicking topsheet and OrthoLite® open-cell top foam.

V3 Superenduro Waffle Outsole with All-Trac™ Rubber – Inspired by the extended cross- country and off-road demands of moto enduro racing, the V3 SuperEnduro outsole is designed to offer maximum performance in and out of your bindings. Multi-directional tread design? Surface-level texturing? A TPU toe pick? Check, check, and check. There’s no keeping up with this all-terrain apex predator.

Waterproof Breathable Valves – Moisture management through waterproof valves ensures breathability--meaning dry socks, dry feet, and a more comfortable and longer ride.

Heat Retention 360º – All Vans snowboard boots feature a newly improved thermal retention layer that provides a 360° wrap of the toe box and between the outsole and the liner. This essential layer keeps heat in and cold out, ensuring all-day warmth and comfort.